L7FB60J USER MANUAL FR Notice d'utilisation Lave-linge
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................3 2. CONSIGNES DE SÉCURITÉ........................................................................................4 3. INSTALLATION............................................................................................................6 4. DESCRIPTION DE L'APPAREIL.................................................................................10 5.
FRANÇAIS 1. 3 INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • • Respectez la charge maximale de 8 kg (reportez-vous au chapitre « Tableau des programmes »). La pression de l'eau en service au niveau du point d'entrée en provenance de l'arrivée d'eau doit être comprise entre 0,5 bar (0,05 MPa) et 8 bar (0,8 MPa). Les orifices d'aération situés à la base ne doivent pas être obstrués par de la moquette, un tapis, ou tout type de revêtement de sol.
FRANÇAIS • • • • • • • • • Utilisez toujours des gants de sécurité et des chaussures fermées. N'installez pas et ne branchez pas un appareil endommagé. Suivez scrupuleusement les instructions d'installation fournies avec l'appareil. N'installez pas l'appareil ou ne l'utilisez pas dans un endroit où la température ambiante est inférieure à 0 °C ou dans un endroit exposé aux intempéries. L'appareil doit être installé sur un sol plat, stable, résistant à la chaleur et propre.
www.aeg.com • Ne lavez pas les textiles très tachés par de l'huile, de la graisse ou une autre substance grasse. Cela pourrait endommager les pièces en caoutchouc du lave-linge. Prélavez de tels articles à la main avant de les introduire dans le lave-linge. • Ne touchez pas la vitre du hublot pendant le déroulement d'un programme. La vitre peut être chaude. 2.5 Maintenance • Pour réparer l'appareil, contactez un service après-vente agréé. • Utilisez exclusivement des pièces d'origine.
FRANÇAIS 7 que tous les articles présents dans le tambour. 5. Couchez avec soin l'appareil sur le dos. 6. Placez le bloc en polystyrène de l'avant au sol, sous l'appareil. Assurez-vous de ne pas endommager les tuyaux. 9. Retirez le câble d'alimentation électrique et le tuyau de vidange de leurs supports. Il est possible de voir de l'eau s'écouler du tuyau d'évacuation. Cette eau provient des tests effectués sur l'appareil en usine. 7. Retirez la protection en polystyrène en bas de l'appareil. 10.
www.aeg.com L'appareil doit être de niveau et stable. Une mise de niveau correcte évite les vibrations, le bruit ou des déplacements de l'appareil au cours de son fonctionnement. Nous vous recommandons de conserver l'emballage et les boulons de transport en vue d'un éventuel déplacement de l'appareil. 3.
FRANÇAIS 3. Si nécessaire, desserrez la bague de serrage pour bien le positionner. 4. Raccordez le tuyau d'arrivée d'eau à un robinet d'eau froide fileté (3/4 pouce). 9 3.5 Vidange de l'eau Le tuyau de vidange doit être installé à une hauteur du sol comprise entre 60 et 100 cm. La longueur maximale du tuyau de vidange est de 400 cm. Contactez le service après-vente agréé pour obtenir d'autres longueurs de tuyaux de vidange et des rallonges.
www.aeg.com conduite d'évacuation. Reportezvous à l'illustration. L'extrémité du tuyau de vidange doit être ventilée en permanence, c'est-à-dire que le diamètre interne du conduit d’évacuation (minimum 38 mm - min. 1,5 po) doit être supérieur au diamètre externe du tuyau de vidange. 4. Si l'extrémité du tuyau de vidange ressemble à l'image, vous pouvez l'insérer directement dans la conduite fixe. 5.
FRANÇAIS • Grâce à l'option Soft Plus, l'assouplissant est réparti de façon uniforme sur le linge et pénètre en profondeur dans les fibres pour une douceur parfaite. 4.
www.aeg.com 5. BANDEAU DE COMMANDE 5.1 Description du bandeau de commande 3 2 1 Programma/Programme Eco Katoen Blanc/Couleurs Synthetica Synthétiques Fijne Was Délicats 4 Tijd Besparen Gain de temps Wol/Zijde Laine/Soie Stoom Vapeur Anti-Allergie Anti-Allergies Temp. °C TPM Jeans Aan/Uit Marche/Arrêt 12 • Option Prélavage (Voorwas Prélavage) Spoelen Rinçage Vlek./Voorw. Taches/Prélav.
FRANÇAIS 13 5.2 Affichage Voyant de charge maximale. Le voyant clignote lors de l'estimation de la charge de linge (consultez le paragraphe « Détection de la charge ProSense »). Voyant de charge maximale. Il clignote si la charge de linge dépasse la charge déclarée. Voyant Hublot verrouillé. Indicateur Départ différé. L'indicateur numérique peut afficher : • La durée du programme (par ex. • Le départ différé (par ex. ou ). ). • La fin du cycle ( ). • Un code d'alarme (par ex. ).
www.aeg.com Voyant Gain de temps. Indicateur de vitesse d'essorage. Voyant Arrêt cuve pleine. Indicateur Extra silence. Indicateur de température. Le voyant tionnez un lavage à froid. apparaît lorsque vous sélec- 6. MANETTES ET TOUCHES 6.1 Aan /Uit - Marche/Arrêt 6.3 Temp.°C Appuyez sur cette touche pendant quelques secondes pour allumer et éteindre l'appareil. Deux différents signaux sonores retentissent lorsque vous allumez ou éteignez l'appareil.
FRANÇAIS Si vous appuyez sur la touche Start/ Pauze - Départ/Pause, l'appareil effectue une phase d'essorage et vidange l'eau. L'appareil vidange l'eau automatiquement au bout d'environ 18 heures. • Activer l'option Extra Silence. Les phases d'essorage intermédiaire et final sont supprimées et le programme se termine avec de l'eau dans le tambour. Cela réduit le froissage du linge. L'indicateur s'allume. Le hublot reste verrouillé. Le tambour tourne régulièrement pour éviter que le linge ne se froisse.
www.aeg.com Cette option peut rallonger la durée du programme. Lorsque le programme s'arrête, un zéro s'affiche , le voyant est fixe et le voyant commence à clignoter. Le tambour effectue des mouvements doux pendant environ 30 minutes pour conserver les bénéfices de la vapeur. En appuyant sur une touche, les mouvements anti-froissage s'arrêtent et le hublot se déverrouille. Une petite quantité de linge aide à obtenir de meilleurs résultats. 6.
FRANÇAIS 17 7. PROGRAMMES 7.1 Tableau des programmes Programmes de lavage Programme Description du programme Programmes de lavage Katoen - Blanc/Couleurs Coton blanc et couleurs. Normalement, très et légèrement sales. Programmes standard pour les valeurs de consommation de l'étiquette énergétique.
www.aeg.com Programme Description du programme Programmes de lavage Anti-Allergie - Anti-Allergies 20 min. - 3 kg Outdoor Articles en coton blanc. Ce programme élimine les micro-organismes grâce à une phase de lavage à une température maintenue à plus de 60 °C pendant quelques minutes. Cela permet d'éliminer les germes, bactéries, micro-organismes et particules.
FRANÇAIS Programme Machine Clean 19 Description du programme Le cycle de maintenance à l'eau chaude sert à nettoyer et rafraîchir le tambour, ainsi qu'à éliminer les résidus qui pourraient entraîner la formation de mauvaises odeurs. Pour des résultats optimaux, effectuez ce cycle une fois par mois. Avant d'effectuer ce cycle, retirez tous les articles du tambour. Dans le compartiment de la phase de lavage du distributeur de produit de lavage, placez le volet du compartiment vers le haut.
www.aeg.com Programme Température par défaut Plage de températures Vitesse d'essorage maxi- Charge maximale male Plage de vitesses d'essorage Anti-Allergie - Anti-Allergies 60 °C 1600 tr/min 1600 tr/min - 400 tr/min 8 kg 20 min.
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Plus Steam4) ■ ■ Soft Plus ■ ■ Vlekken - Taches1) Voorwas - Prélavage Extra Spoelen - Rinçage plus Rinçage uniquement 2) Tijd Besparen - Gain de Temps 3) Startuitstel - Départ Différé ■ ■ ■ ■ ■ ■ ■ 21 Machine Clean ■ Jeans ■ ment Outdoor Wol/Zijde - Laine/Soie ■ Essorage unique- 20 min.
www.aeg.com 7.2 Woolmark Apparel Care - Bleu Le cycle Laine de cet appareil a été approuvé par la société Woolmark pour le lavage des vêtements en laine portant une étiquette « lavage à la main », sous réserve que les vêtements soient lavés conformément aux instructions du fabricant de ce lave-linge. Consultez l'étiquette d'entretien du vêtement pour plus d'instructions sur le séchage et le lavage. M1623 Le symbole Woolmark est une marque de certification dans de nombreux pays. 8. RÉGLAGES 8.
FRANÇAIS 8.5 Soft Plus Sélectionnez l'option Soft Plus pour optimiser la distribution d'assouplissant et rendre le linge plus doux. Il est recommandé lorsque vous utilisez de l'assouplissant. 23 Pour activer/désactiver cette option, appuyez simultanément sur les touches Temp.°C et TPM jusqu'à ce que le voyant s'allume/s'éteigne au-dessus de l'indicateur . Cette option augmente légèrement la durée du programme. 9. AVANT LA PREMIÈRE UTILISATION 1.
www.aeg.com ATTENTION! Veillez à ce qu'il n'y ait pas de linge coincé entre le joint et le hublot. Cela pourrait provoquer une fuite d'eau ou endommager le linge. 10.3 Ajout du produit de lavage et des additifs 10.4 Vérifiez la position du volet 1. Tirez le distributeur de produit de lavage jusqu'à la butée. 2. Appuyez sur le levier pour faire sortir le distributeur. 1 2 3. Pour utiliser de la lessive en poudre, tournez le volet vers le haut.
FRANÇAIS Avec le volet en position BASSE : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne versez pas de lessive liquide audelà du niveau maximal indiqué sur le volet. • Ne sélectionnez pas de phase de prélavage. • Ne sélectionnez pas la fonction Départ différé. 5. Dosez le produit de lavage et l'assouplissant. 6. Fermez soigneusement le distributeur de produit de lavage. 25 3. Si nécessaire, sélectionnez une ou plusieurs options en appuyant sur les touches correspondantes.
www.aeg.com en pause. Le voyant correspondant clignote. 2. Appuyez à plusieurs reprises sur la touche Startuitstel - Départ Différé jusqu'à ce que s'affiche. 3. Appuyez de nouveau sur la touche Start/Pauze - Départ/Pause pour lancer le programme immédiatement. Modification du départ différé au cours du décompte Pour modifier le départ différé : 1. Appuyez sur la touche Start/Pauze Départ/Pause pour mettre l'appareil en pause. Le voyant correspondant clignote. 2.
FRANÇAIS La phase à la vapeur est en cours : . La phase anti-froissage est en cours : . 10.10 Interruption d'un programme et modification des options Lorsque le programme est en cours, vous ne pouvez changer que quelques options : 1. Appuyez sur la touche Start/Pauze Départ/Pause. Le voyant correspondant clignote. 2. Modifiez les options. Les informations données sur l'affichage changent en conséquence. 3. Appuyez à nouveau sur la touche Start/Pauze - Départ/Pause. Le programme de lavage se poursuit. 10.
www.aeg.com 2. 3. 4. 5. Lorsque vous rallumez l'appareil, le dernier programme sélectionné s'affiche. Tournez le sélecteur pour choisir un nouveau cycle. Sortez le linge de l'appareil. Vérifiez que le tambour est vide. Laissez le hublot et la boîte à produits entrouverts pour éviter la formation de moisissures et l'apparition de mauvaises odeurs. Fermez le robinet d'eau. 10.
FRANÇAIS • Ne lavez pas les articles blancs et de couleur ensemble. • Certains articles de couleurs peuvent déteindre lors des premiers lavages. Il est recommandé de les laver séparément les premières fois. • Boutonnez les taies d'oreiller, fermez les fermetures à glissière et à pression et les crochets. Attachez les ceintures. • Videz les poches et retournez-les. • Retournez les tissus multi-couches, en laine et les articles portant des illustrations imprimées vers l'intérieur.
www.aeg.com d'eau pour lave-linge. Dans les régions où l'eau est douce, il n'est pas nécessaire d'utiliser un adoucisseur d'eau. Utilisez la bonne quantité d'adoucisseur d'eau. Respectez les instructions qui se trouvent sur les emballages du produit. Pour connaître la dureté de l'eau dans votre région, contactez votre compagnie des eaux. 12. ENTRETIEN ET NETTOYAGE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 12.
FRANÇAIS 2. Lancez un programme court pour le coton à température élevée, tambour vide, avec une petite quantité de lessive en poudre afin de rincer tous les résidus restants. 31 Utilisez une petite brosse pour nettoyer les recoins. 12.6 Nettoyage du distributeur de produit de lavage Pour éviter les dépôts de lessive séchée, d'assouplissant coagulé et/ou la formation de moisissures dans le distributeur de produit de lavage, veillez à effectuer régulièrement la procédure de nettoyage suivante : 1.
www.aeg.com AVERTISSEMENT! • Ne retirez pas le filtre pendant que l'appareil fonctionne. • Ne nettoyez pas la pompe si l'eau de l'appareil est chaude. Attendez que l'eau refroidisse. Pour nettoyer la pompe, procédez comme suit : 1. Ouvrez le couvercle de la pompe. 2 5. Lorsque le récipient est plein d'eau, remettez le filtre en position et videz le récipient. 6. Répétez les étapes 4 et 5 jusqu'à ce que l'eau cesse de s'écouler. 7. Tournez le filtre vers la fauche pour le retirer. 1 2.
FRANÇAIS 33 12.8 Nettoyage du tuyau d'arrivée d'eau et du filtre de la vanne Il est recommandé de nettoyer occasionnellement les deux filtres du tuyau d'arrivée d'eau et la valve pour éliminer les dépôts accumulés avec le temps : 1. Retirez le tuyau d'arrivée d'eau du robinet et nettoyez le filtre. 11. Replacez le filtre dans les guides spéciaux en le tournant vers la droite. Assurez-vous de serrer correctement le filtre afin d'empêcher toute fuite. 1 2 2 3 1 2.
www.aeg.com 4. Lorsque vous rebranchez le tuyau à l'arrière de l'appareil, tournez-le vers la gauche ou la droite (et non en position verticale) en fonction de la position du robinet. 2. Démarrez le programme pour vidanger l'eau. 12.10 Précautions contre le gel Si l'appareil est installé dans un local où la température peut être négative, évacuez toute l'eau restant dans le tuyau d'alimentation et la pompe de vidange. 45° 20° 12.
FRANÇAIS Si l'appareil est trop chargé, retirez des vêtements du tambour et/ou poussez sur le hublot tout en appuyant sur la touche Start/Pauze - Départ/Pause jusqu'à ce 35 • - L'alimentation électrique est instable. Attendez que l'alimentation électrique se stabilise. • - Il n'y a aucune communication entre les composants électroniques de l'appareil. Éteignez puis rallumez l'appareil. Le programme ne s'est pas terminé correctement, ou l'appareil s'est arrêté trop tôt.
www.aeg.com Problème Solution possible L'appareil se remplit d'eau et se vidange immédiatement. • Vérifiez que la position du tuyau de vidange est correcte. Le tuyau est peut-être positionné trop bas. Reportez-vous au chapitre « Instructions d'installation ». L'appareil ne vidange pas l'eau. • Assurez-vous que le siphon de l'évier n'est pas obstrué. • Assurez-vous que le tuyau de vidange n'est pas tordu ni plié. • Assurez-vous que le filtre de vidange n'est pas obstrué.
FRANÇAIS 37 Problème Solution possible La durée du programme augmente ou diminue durant l'exécution du programme. • La fonction ProSense est capable d'ajuster la durée du programme en fonction du type et de la quantité de linge. Reportez-vous au paragraphe « Fonction ProSense » dans le chapitre « Utilisation quotidienne ». Les résultats de lavage ne sont pas satisfaisants. • Augmentez la quantité de produit de lavage ou utilisez-en un autre.
www.aeg.com 2. Débranchez la fiche de l'appareil de la prise secteur. 3. Ouvrez le volet du filtre. 4. Abaissez deux fois le dispositif de déverrouillage d'urgence et ouvrez le hublot. 5. Sortez le linge et refermez le hublot. 6. Fermez le volet du filtre. 14. VALEURS DE CONSOMMATION Les valeurs indiquées sont obtenues après des essais en laboratoire, avec les normes correspondantes. Les données peuvent différer pour différentes raisons : la quantité et le type de linge, ou la température ambiante.
FRANÇAIS Programmes Charge (kg) Consommation énergétique (kWh) 3 0.60 60 120 35 1.5 0.30 60 75 30 Fijne Was - Délicats 40 °C Wol/Zijde - Laine/Soie 30 °C Consommation d'eau (litres) 39 Durée ap- Humidité proximati- résiduelle ve du pro- (%)1) gramme (minutes) Programmes standard pour le coton Coton 60 °C standard 8 0.70 54 230 44 Coton 60 °C standard 4 0.50 41 230 44 Coton 40 °C standard 4 0.50 42 230 44 1) Au terme de la phase d'essorage. Mode « Éteint » (W) 0.
www.aeg.com Vitesse d'essorage Maximale 1600 tr/min 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté 3/4'' . 16. ACCESSOIRES 16.1 Disponible sur www.aeg.com/shop ou chez un revendeur agréé Seuls les accessoires appropriés et agréés par AEG peuvent répondre aux normes de sécurité de l'appareil. Si les pièces ne sont pas agréées, toute réclamation sera refusée. 16.2 Kit de plaques de fixation Si vous installez l'appareil sur un socle, stabilisez l'appareil à l'aide des plaques de fixation.
FRANÇAIS ménagères. Emmenez un tel produit dans votre centre local de recyclage ou contactez vos services municipaux.
www.aeg.
FRANÇAIS 43
157016170-A-492017 www.aeg.