L7FBE48SP USER MANUAL PL Instrukcja obsługi Pralka
www.aeg.com SPIS TREŚCI 1. INFORMACJE DOTYCZĄCE BEZPIECZEŃSTWA..............................................3 2. WSKAZÓWKI DOTYCZĄCE BEZPIECZEŃSTWA...............................................5 3. INSTALACJA........................................................................................................ 6 4. OPIS URZĄDZENIA............................................................................................11 5. PANEL STEROWANIA............................................................
POLSKI 1. 3 INFORMACJE DOTYCZĄCE BEZPIECZEŃSTWA Przed przystąpieniem do instalacji i rozpoczęciem eksploatacji urządzenia należy uważnie zapoznać się z załączoną instrukcją obsługi. Producent nie odpowiada za obrażenia ciała ani szkody spowodowane nieprawidłową instalacją lub eksploatacją urządzenia. Należy zachować instrukcję obsługi w bezpiecznym i łatwo dostępnym miejscu do wykorzystania w przyszłości. 1.
www.aeg.com 1.2 Ogólne zasady bezpieczeństwa • • • • • • • • • • Nie zmieniać parametrów technicznych urządzenia. Nie należy przekraczać maksymalnego ciężaru ładunku, który wynosi 8 kg (patrz „Tabela programów”). Ciśnienie robocze wody w punkcie podłączenia powinno wynosić od 0,5 bara (0,05 MPa) do 8 barów (0,8 MPa). Wykładzina podłogowa, dywan lub mata podłogowa nie mogą zasłaniać otworów wentylacyjnych w podstawie.
POLSKI 5 2. WSKAZÓWKI DOTYCZĄCE BEZPIECZEŃSTWA 2.1 Instalacja Urządzenie musi zostać zainstalowane zgodnie z odpowiednimi krajowymi przepisami. • • • • • • • • • • • • Usunąć wszystkie elementy opakowania i blokady transportowe. Przechowywać blokady transportowe w bezpiecznym miejscu. Jeśli w przyszłości zajdzie potrzeba ponownego transportu urządzenia, należy zamontować blokady w celu unieruchomienia bębna, aby zapobiec wewnętrznym uszkodzeniom.
www.aeg.com • • Nie stosować węży przedłużających, jeśli wąż dopływowy jest za krótki. Należy skontaktować się z punktem serwisowym, aby zamówić dłuższy wąż dopływowy. Wąż spustowy można przedłużyć maksymalnie do 400 cm. Więcej informacji na temat innych węży spustowych i przedłużających można uzyskać w punkcie serwisowym. • 2.5 Serwis • 2.4 Eksploatacja OSTRZEŻENIE! Zagrożenie odniesieniem obrażeń, porażeniem prądem, pożarem lub uszkodzeniem urządzenia.
POLSKI 3. Zdjąć wewnętrzną folię. 7. Usunąć blok styropianu ze spodu urządzenia. 1 4. Otworzyć drzwi i wyjąć z uszczelki drzwi zabezpieczenie styropianowe oraz wyjąć wszystkie przedmioty z bębna. 5. Ostrożnie położyć na nim urządzenie na tylnej ściance. 6. Położyć przedni styropianowy element opakowania na podłodze pod urządzeniem. Uważać, aby nie uszkodzić węży. 2 8. Podnieść urządzenie do pozycji pionowej. 9. Zdjąć przewód zasilający i wąż spustowy z uchwytów.
www.aeg.com Należy upewnić się, że wykładzina nie uniemożliwia swobodnej cyrkulacji powietrza pod urządzeniem. Urządzenie nie może dotykać ścian ani innych przedmiotów. 2. Poluzować lub dokręcić nóżki, aby wypoziomować urządzenie. 10. Odkręcić trzy śruby kluczem dołączonym w komplecie z urządzeniem. OSTRZEŻENIE! Nie należy umieszczać pod nóżkami urządzenia kawałków kartonu, drewna lub innych materiałów w celu wypoziomowania. 11. Wyciągnąć plastikowe rozpórki. 12.
POLSKI 9 UWAGA! Sprawdzić, czy nie ma wycieków ze złączek. Nie stosować węży przedłużających, jeśli wąż dopływowy jest za krótki. Należy skontaktować się z punktem serwisowym, aby zamówić dłuższy wąż dopływowy. 3.3 Wąż dopływowy 1. Podłączyć wąż dopływowy z tyłu urządzenia. 2. Skierować go w prawo lub w lewo, odpowiednio do położenia zaworu wody. 3.4 Zabezpieczenie przed zalaniem Wąż dopływowy wyposażony jest w zabezpieczenie przed zalaniem.
www.aeg.com 1. Zagiąć wąż na kształt litery U i poprowadzić go wzdłuż plastikowej prowadnicy węża. 2. Na krawędzi umywalki– Przymocować prowadnicę do zaworu wody lub do ściany. Należy zawsze zapewnić wentylację końcówki węża spustowego, tj. wewnętrzna średnica rury kanalizacyjnej (min. 38 mm - min. 1.5") musi być większa niż zewnętrzna średnica węża spustowego. 4. Jeśli końcówka węża spustowego wygląda w następujący sposób (patrz ilustracja), można ją włożyć bezpośrednio do rury kanalizacyjnej.
POLSKI 11 4. OPIS URZĄDZENIA 4.1 Funkcje specjalne Zakupiona przez Państwa pralka spełnia wszystkie nowoczesne wymagania związane z efektywnym praniem przy jednoczesnym niskim zużyciu wody, energii i detergentów, zapewniając wyjątkową wydajność prania i suszenia. • • Technologia ProSense wykrywa wielkość ładunku i określa czas trwania programu w ciągu 30 sekund.
www.aeg.com 5. PANEL STEROWANIA 5.1 Opis panelu sterowania 3 2 1 P r o g ra m Eco Bawełniane S y n t e t yc z n e D e l i ka t n e Wełniane/Jedwabne Pa r a A n t ya l e r g i c z n e 2 0 m i n . - 3 kg O u td o o r Koc Jeans Tylko odpompowanie Tylko wirowanie Temperatura Opcja prania wstępnego (Pranie wstępne) Para+ 11 10 9 12 • 4 Odplamianie D o d a t ko w e p ł u ka n i e Tylko płukanie 5 Pranie wstępne Odplamianie/ Pranie wstępne Płukanie Soft Plus Wł./Wył.
POLSKI 13 5.2 Wyświetlacz Wskaźnik maksymalnego wsadu. Wskaźnik miga podczas wykrywa‐ nia ciężaru ładunku (patrz rozdział Funkcja wykrywania ładunku Pro‐ Sense). Wskaźnik maksymalnego ładunku. Wskaźnik miga, gdy ciężar ładunku przekracza deklarowany wsad. Wskaźnik blokady drzwi. Wskaźnik opóźnienia rozpoczęcia programu. Wskaźnik cyfrowy może pokazywać: • Czas trwania programu (np. • Czas opóźnienia programu (np. • Zakończenie cyklu ( ). • Kod ostrzeżenia (np. ). lub ). ). Wskaźnik fazy prania.
www.aeg.com Wskaźnik funkcji oszczędzania czasu. Wskaźnik prędkości wirowania. Wskaźnik funkcji Stop z wodą. Wskaźnik funkcji Bardzo ciche. Wskaźnik temperatury. Wskaźnik w zimnej wodzie. pojawia się, gdy wybrano pranie 6. POKRĘTŁO I PRZYCISKI 6.1 Wł./Wył. Naciśnięcie tego przycisku przez kilka sekund umożliwia włączenie lub wyłączenie urządzenia. Podczas włączania i wyłączania urządzenia emitowane są dwa różne dźwięki.
POLSKI • Urządzenie automatycznie odpompuje wodę po około 18 godzinach. Włączyć opcję Bardzo ciche. Pośrednie fazy wirowania oraz ostatnia faza są wstrzymane, a program kończy się z wodą w bębnie. Pozwala to zmniejszyć zagniecenia. Na wyświetlaczu pojawi się wskaźnik . Drzwi pozostają zablokowane. Bęben obraca się regularnie, aby zmniejszyć zagniecenia. Aby otworzyć drzwi, należy odpompować wodę. Program jest bardzo cichy, można go uruchamiać nocą, gdy dostępne są tańsze taryfy za prąd.
www.aeg.com chroniącej przed zagnieceniami i odblokowanie drzwi. Mniejszy ładunek prania umożliwia osiągnięcie lepszych efektów. 6.7 Opóźniony start Ta opcja umożliwia późniejsze rozpoczęcie programu, w dogodnym czasie. Dotykać przycisku, aby ustawić żądany czas opóźnienia. Czas zwiększa się skokowo co 30 minut do 90 minut, a następnie od 2 godzin do 20 godzin. Po dotknięciu przycisku Start/Pauza na i wyświetlaczu pojawia się wskaźnik wybrany czas opóźnienia, a urządzenie rozpoczyna odliczanie. 6.
POLSKI 17 7. PROGRAMY 7.1 Tabela programów Programy prania Program Opis programu Programy prania Bawełniane Białe i kolorowe tkaniny bawełniane. Średnio, bardzo lub lekko zabrudzone. Standardowe programy do określenia parametrów eks‐ ploatacyjnych dla klasy energetycznej.
www.aeg.com Program Opis programu Programy prania Antyalergiczne 20 min. - 3 kg Białe rzeczy bawełniane. Program usuwa mikroorganizmy dzięki fazie prania, w której przez kilka minut utrzymuje się temperatura powyżej 60°C. Pozwala to usunąć zarazki, bakte‐ rie, mikroorganizmy i cząstki stałe. Dodatkowa faza płukania zapewnia skuteczne usunięcie resztek detergentu oraz pyłków i alergenów. Dzięki temu pranie jest skuteczniejsze.
POLSKI Temperatura programu, maksymalna prędkość wirowania i maksymalny wsad Program Temperatura do‐ myślna Zakres tempera‐ tur Maksymalna pręd‐ Maksymalny kość wirowania wsad Zakres prędkości wi‐ rowania Bawełniane 40°C 95°C - pranie w zimnej wodzie 1400 obr./min 1400 obr./min - 400 obr./min 8 kg Syntetyczne 40°C 60°C - pranie w zimnej wodzie 1200 obr./min 1200 obr./min - 400 obr./min 3 kg Delikatne 40°C 40°C - pranie w zimnej wodzie 1200 obr./min 1200 obr./min - 400 obr.
www.aeg.com Delikatne Antyalergiczne 20 min.
POLSKI 21 7.2 Woolmark Apparel Care – niebieski Firma Woolmark Company zatwierdziła cykl prania wełny dostępny w tym urządzeniu jako nadający się do prania odzieży wełnianej oz‐ naczonej metką „prać ręcznie”, pod warun‐ kiem, że pranie będzie wykonane zgodnie z zaleceniami producenta pralki. Należy sto‐ sować się do informacji dotyczących suszenia oraz pozostałych wskazówek zamieszczo‐ nych na metce odzieży. M1623 W wielu krajach symbol Woolmark jest certyfi‐ kowanym znakiem towarowym. 8. USTAWIENIA 8.
www.aeg.com 8.5 Soft Plus Ustawić opcję Soft Plus, aby optymalnie dozować płyn zmiękczający do tkanin i zapewnić miękkość tkanin. Zaleca się to w przypadku używania płynu zmiękczającego do tkanin. Aby włączyć/wyłączyć tę opcję, należy jednocześnie dotknąć przycisków Temperatura i Wirowanie, aż wskaźnik nad wskaźnikiem zgaśnie. zaświeci się/ Opcja ta nieznacznie wydłuża czas trwania programu. 9. PRZED PIERWSZYM UŻYCIEM 1. Upewnić się, że usunięto wszystkie blokady transportowe z urządzenia. 2.
POLSKI UWAGA! Należy upewnić się, że nie doszło do przytrzaśnięcia prania między drzwiami a uszczelką. Mogłoby to spowodować wyciek wody lub uszkodzenie pranych rzeczy. 23 10.4 Sprawdzić położenie klapki 1. Wysunąć do oporu dozownik detergentu. 2. Nacisnąć dźwignię w dół, aby wyjąć dozownik. 1 10.3 Stosowanie detergentów i dodatków 2 3. W przypadku detergentu w proszku ustawić klapkę w górnym położeniu. Przegródka na detergent do fazy prania wstępnego, programu namaczania lub na odplamiacz.
www.aeg.com Klapka w DOLNYM położeniu: • Nie stosować gęstych ani żelowych detergentów. • Nie wlewać więcej detergentu w płynie, niż wskazuje oznaczenie na klapce. • Nie ustawiać fazy prania wstępnego. • Nie ustawiać funkcji opóźnienia rozpoczęcia programu. 5. Odmierzyć odpowiednią ilość detergentu i płynu zmiękczającego. 6. Zamknąć dobrze dozownik detergentu. 3. W razie potrzeby można wybrać jedną lub więcej opcji, dotykając odpowiednich przycisków.
POLSKI 1. Dotknąć przycisku Start/Pauza, aby włączyć tryb pauzy. Zacznie migać odpowiedni wskaźnik. 2. Dotykać przycisku Opóźniony start, aż na wyświetlaczu pojawi się . 3. Ponownie dotknąć przycisku Start/ Pauza, aby natychmiast uruchomić program. W takim przypadku w ciągu 30 sekund można wstrzymać pracę urządzenia i wyjąć z bębna kilka rzeczy.
www.aeg.com 10.10 Przerywanie programu i zmiana opcji W czasie trwania programu można zmienić tylko niektóre opcje: 1. Dotknąć przycisku Start/Pauza. Zacznie migać odpowiedni wskaźnik. 2. Zmienić opcje. Informacje podane na wyświetlaczu odpowiednio zmienią się. 3. Dotknąć ponownie przycisku Start/ Pauza. Program prania będzie kontynuowany. 10.11 Anulowanie programu w trakcie jego trwania 1. Nacisnąć przycisk Wł./Wył., aby anulować program i wyłączyć urządzenie. 2. Nacisnąć przycisk Wł./Wył.
POLSKI 10.14 Odpompowanie wody po zakończeniu cyklu Jeśli wybrano program lub opcję, po których urządzenie nie odpompowuje wody po ostatnim płukaniu, program jest zakończony, ale: • Na wyświetlaczu pojawia się wskaźnik , wskaźnik opcji lub wskaźnik blokady drzwi • • • oraz . miga. Wskaźnik bieżącej fazy Bęben obraca się regularnie, aby nie dopuścić do zagniecenia prania. Drzwi pozostaną zablokowane.
www.aeg.com • • • • • Przeprać uporczywe plamy specjalnym detergentem. Należy zachować ostrożność przy obchodzeniu się z zasłonami. Odczepić żabki/haczyki i umieścić zasłony w worku do prania lub poszewce od poduszki. Nie prać rozdartych tkanin lub tkanin o nieobszytych brzegach. Małe i/lub delikatne rzeczy (np. biustonosze z fiszbinami, paski, rajstopy itp.) należy prać w worku do prania. Mała ilość prania może stwarzać problemy z wyważeniem podczas wirowania i spowodować nadmierne wibracje.
POLSKI 29 12. KONSERWACJA I CZYSZCZENIE OSTRZEŻENIE! Patrz rozdział dotyczący bezpieczeństwa. 12.1 Czyszczenie obudowy Urządzenie należy czyścić wyłącznie za pomocą ciepłej wody z łagodnym mydłem. Dokładnie osuszyć wszystkie powierzchnie. regularnie (co najmniej raz w miesiącu) wykonać pranie konserwacyjne: 1. Wyjąć pranie z bębna. 2. Uruchomić program do prania bawełny z najwyższą temperaturą i dodać niewielką ilość detergentu w proszku. 12.
www.aeg.com 1. Otworzyć szufladę. Nacisnąć rygiel do dołu, jak pokazano na ilustracji, i wyjąć szufladę. 1 2 2. Zdjąć górną część przegródki na dodatki, aby ułatwić czyszczenie, i przepłukać pod bieżącą ciepłą wodą w celu usunięcia pozostałości nagromadzonego detergentu. Po umyciu założyć górną część w odpowiednim miejscu. 12.7 Czyszczenie pompy opróżniającej OSTRZEŻENIE! Wyjąć wtyczkę przewodu zasilającego z gniazda elektrycznego.
POLSKI 31 6. Powtarzać punkty 4 i 5, aż woda przestanie wypływać. 7. Obrócić filtr w kierunku przeciwnym do ruchu wskazówek zegara, aby go wyjąć. 2 1 2. Pod otworem dostępowym umieścić odpowiednie naczynie do zebrania wypływającej wody. 3. Otworzyć w dół rynienkę. Dobrze jest mieć w pobliżu szmatkę do wycierania wody wyciekającej podczas odkręcania filtra. 1 2 8. W razie potrzeby usunąć włókna i inne zanieczyszczenia z wnęki filtra. 9. Sprawdzić, czy wirnik pompy swobodnie się obraca.
www.aeg.com 2 1 2 1 3 2. Wyjąć wąż dopływowy z urządzenia, odkręcając nakrętkę. 12. Zamknąć pokrywę pompy. 2 1 Po spuszczeniu wody przy użyciu procedury awaryjnej należy ponownie uruchomić układ odpływowy: a. Wlać 2 litry wody do przegródki na detergent do prania zasadniczego dozownika detergentu. b. Uruchomić program, aby odpompować wodę. 3. Filtr zaworu z tyłu urządzenia należy czyścić za pomocą szczoteczki do zębów. 12.
POLSKI 33 osiągnąć 0°C lub spaść poniżej, należy usunąć pozostałą wodę z węża dopływowego oraz z pompy opróżniającej. 45° 20° 12.9 Awaryjne spuszczanie wody Jeśli urządzenie nie spuszcza wody, należy przeprowadzić taką samą procedurę, jak opisano w rozdziale „Czyszczenie filtra odpływowego”. W razie potrzeby wyczyścić pompę. 1. Wyjąć wtyczkę przewodu zasilającego z gniazda elektrycznego. 2. Zakręcić zawór wody. 3. Umieścić dwa końce węża dopływowego w zbiorniku i odczekać, aż woda spłynie z węża. 4.
www.aeg.com Jeśli urządzenie jest przepełnione, należy wyjąć część rzeczy z bębna i/lub dociskając drzwi, nacisnąć jednocześnie przycisk Start/Pauza, aż wskaźnik przestanie migać (patrz poniższa ilustracja). • – brak komunikacji między podzespołami elektronicznymi urządzenia. Wyłączyć urządzenie i włączyć je ponownie. Program nie zakończył się prawidłowo lub został zatrzymany zbyt wcześnie. Jeśli kod alarmu pojawi się ponownie, należy skontaktować się z autoryzowanym centrum serwisowym.
POLSKI 35 Problem Możliwe rozwiązanie Urządzenie napełnia się wodą i od razu wypom‐ powuje wodę • Upewnić się, że wąż spustowy ułożono prawidłowo. Wąż może być umieszczony za nisko. Patrz punkt „Instrukcja in‐ stalacji”. • • Upewnić się, że syfon umywalki jest drożny. Upewnić się, że wąż spustowy nie jest zagięty ani przygnie‐ ciony. Upewnić się, że filtr odpływowy jest drożny. W razie potrze‐ by wyczyścić filtr. Patrz „Konserwacja i czyszczenie”. Upewnić się, że wąż spustowy podłączono prawidłowo.
www.aeg.com Problem Możliwe rozwiązanie Czas trwania programu wydłuża się lub skraca podczas trwania progra‐ mu. • Funkcja ProSense dostosowuje czas trwania programu od‐ powiednio do rodzaju i ilości prania. Patrz „Funkcja wykry‐ wania wsadu ProSense” w rozdziale „Codzienna eksploata‐ cja”. • • • • Zwiększyć ilość lub użyć innego detergentu. Użyć specjalnych środków do usuwania uporczywych plam przed praniem. Należy sprawdzić, czy ustawiono prawidłową temperaturę. Zmniejszyć ilość prania.
POLSKI 3. Otworzyć osłonę filtra. 4. Pociągnąć dwukrotnie dźwignię awaryjnego odblokowania i otworzyć drzwi urządzenia. 5. Wyjąć pranie i zamknąć drzwi urządzenia. 6. Zamknąć pokrywę filtra. 14. PARAMETRY EKSPLOATACYJNE Podane wartości uzyskano w warunkach laboratoryjnych zgodnie z od‐ powiednimi standardami. Różne czynniki, takie jak ilość i rodzaj prania oraz temperatura otoczenia, mogą wpływać na zmianę tych wartości.
www.aeg.com Programy Wsad (kg) Bawełniane 60°C – program standardowy Bawełniane 60°C – program standardowy Bawełniane 40°C – program standardowy Zużycie energii (kWh) Zużycie wody (li‐ try) Przybliżo‐ Wilgot‐ ny czas ność trwania (%)1) programu (minuty) 8 0.68 54 228 52 4 0.49 41 227 52 4 0.46 42 228 52 1) Po zakończeniu fazy wirowania. Tryb wyłączenia (W) 0.30 Tryb czuwania (W) 0.
POLSKI 39 16. AKCESORIA 16.1 Dostępne na www.aeg.com/shop lub u autoryzowanego sprzedawcy Jedynie używanie odpowiednich akcesoriów zatwierdzonych przez firmę AEG zapewni spełnienie norm bezpieczeństwa przez urządzenie. Użycie niezatwierdzonych części będzie powodem negatywnego rozpatrzenia reklamacji. 16.2 Zestaw płytek mocujących Suszarkę można ustawić na pralce jedynie pod warunkiem użycia odpowiedniego zestawu łączącego zatwierdzonego przez firmę AEG.
www.aeg.com ponownego przetwarzania lub skontaktować się z odpowiednimi władzami miejskimi.
POLSKI 41
www.aeg.
POLSKI 43
157002263-A-492017 www.aeg.