L7FBE841 USER MANUAL IT Istruzioni per l’uso Lavabiancheria
www.aeg.com INDICE 1. INFORMAZIONI DI SICUREZZA.................................................................................3 2. ISTRUZIONI DI SICUREZZA........................................................................................ 4 3. INSTALLAZIONE..........................................................................................................6 4. DESCRIZIONE DEL PRODOTTO............................................................................. 10 5. PANNELLO DEI COMANDI......
ITALIANO 1. 3 INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
www.aeg.com 1.2 Avvertenze di sicurezza generali • • • • • • • • • • Non modificare le specifiche tecniche dell'apparecchiatura. Non superare il volume di carico massimo di 8 kg (consultare il capitolo “Tabella dei programmi”). La pressione di funzionamento dell'acqua nel punto di ingresso dal collegamento esterno deve essere compresa fra 0.5 bar (0.05 MPa) e 8 bar (0.8 MPa).
ITALIANO • • • • • • • • • guanti di sicurezza e le calzature adeguate. Non installare o utilizzare l'apparecchiatura se è danneggiata. Attenersi alle istruzioni fornite insieme all'apparecchiatura. Non installare o utilizzare l'apparecchiatura in ambienti in cui la temperatura è al di sotto di 0°C o all'aperto. L'area di pavimento dove sarà installata l'apparecchiatura deve essere piana, stabile, resistente al calore e pulita.
www.aeg.com della lavatrice. Pre-lavare questi tessuti prima di metterli in lavatrice. • Non toccare la porta in vetro mentre un programma è in funzione. Il vetro può surriscaldarsi. 2.5 Assistenza Tecnica • Per riparare l'apparecchiatura contattare il Centro di Assistenza Autorizzato. • Utilizzare esclusivamente ricambi originali. • Staccare la spina dall'alimentazione elettrica e idrica. • Tagliare il cavo elettrico dell'apparecchiatura e smaltirlo.
ITALIANO 5. Sistemare il lato posteriore dell’apparecchiatura sul polistirolo, facendo attenzione. 6. Appoggiare l'elemento frontale in polistirolo sul pavimento, sotto all'apparecchiatura. Assicurarsi di non danneggiare i tubi. 7 9. Staccare il cavo di alimentazione e il tubo di scarico dagli appositi supporti. Si può vedere dell'acqua fuoriuscire dal tubo di scarico. Questa condizione è imputabile alle prove con acqua eseguite sulle apparecchiature in fabbrica. 7.
www.aeg.com L'apparecchiatura deve essere in piano ed appoggiata in modo stabile. Una corretta regolazione del livello dell'apparecchiatura ne impedisce la vibrazione, il rumore e il movimento durante il funzionamento. Consigliamo di conservare l'imballaggio e i bulloni per il trasporto per quando si sposta l'apparecchiatura. 3.
ITALIANO Assicurarsi che il tubo di carico non sia in posizione verticale. 3. Ove necessario, allentare il dado ad anello per sistemarlo nella posizione corretta. 4. Collegare il tubo di carico dell'acqua a un rubinetto dell'acqua fredda con filettatura 3/4". 9 3.5 Scarico dell'acqua Il tubo di scarico dovrebbe trovarsi a un'altezza non inferiore a 60 cm e non superiore a 100 cm. È possibile prolungare il tubo di scarico fino a un massimo di 400 cm.
www.aeg.com conduttura di scarico. Fare riferimento all'immagine. L'estremità del tubo di scarico deve essere sempre ventilata, perciò il diametro interno del condotto di scarico (min. 38 mm = min. 1,5”) deve essere più grande del diametro esterno del tubo di scarico. 4. Se l'estremità del tubo di scarico è questa (vedere il disegno), è possibile inserirla direttamente nel tubo fisso. 5.
ITALIANO 11 4.2 Panoramica dell'apparecchiatura 1 2 9 8 3 10 4 5 11 12 6 7 1 2 3 4 5 6 7 Piano di lavoro Erogatore del detersivo Pannello comandi Maniglia dell'oblò Targhetta dei dati Filtro della pompa di scarico Per mettere in piano l'elettrodomestico 8 9 10 11 12 Tubo flessibile di scarico Collegamento tubo di ingresso Cavo di alimentazione Bulloni per il trasporto Supporto tubo 5. PANNELLO DEI COMANDI 5.
www.aeg.com 1 Selettore dei programmi 2 Display 3 Tasto a sfioramento Eco (Eco) 4 Tasto a sfioramento Risparmio tempo (Risparmio Tempo) 5 Tasto a sfioramento Risciacquo (Risciacquo) • Opzione Extra risciacquo (Extra 8 Tasto a sfioramento Partenza ritardata (Partenza Ritardata) 9 Tasto a sfioramento Steam Plus (Vapore finale) 10 Tasto a sfioramento Riduzione centrifuga (Giri/Min.
ITALIANO 13 La spia digitale può mostrare: • Durata del programma (ad esempio • Tempo di ritardo (ad esempio ). oppure ). • fine del Ciclo ( ). • Codice di avvertenza (ad esempio: ). Spia fase di lavaggio. Lampeggia durante il pre-lavaggio e durante la fase di lavaggio. Spia fase di risciacquo. Lampeggia durante la fase di risciacquo. Quando l'opzione Più morbido è attivata compare l'indicatore . Indicatore di fase centrifuga e scarico. Lampeggia durante la fase di centrifuga e scarico.
www.aeg.com 6.2 Introduzione Le opzioni/funzioni non sono selezionabili con tutti i programmi di lavaggio. Controllare la compatibilità fra opzioni/funzioni e i programmi di lavaggio nella "Tabella dei programmi". Un’opzione/funzione può escludere l’altra, in questo caso l’apparecchiatura non consente di impostare congiuntamente le opzioni/ funzioni incompatibili. Assicurarsi che il display e i tasti a sfioramento siano sempre puliti e asciutti. 6.3 Temp.
ITALIANO Qualora sia necessario ridurre la velocità di centrifuga, selezionare un programma con una velocità di centrifuga inferiore come modalità predefinita. 6.5 Macchie/Prelavaggio Premere ripetutamente questo tasto per attivare una delle due opzioni. La spia rilevante compare sul display. • Macchie Selezionare questa opzione per aggiungere una fase anti-macchia su un programma per trattare il bucato sporco o macchiato col prodotto per rimuovere le macchie.
www.aeg.com 6.9 Risparmio Tempo Questa opzione consente di ridurre la durata del programma. • Se il bucato ha un livello di sporco normale o leggero potrebbe essere consigliabile ridurre il programma di lavaggio. Toccare una volta questo tasto per ridurre la durata. • In caso di un carico più piccolo, toccare due volte questo tasto per impostare un programma extra rapido.
ITALIANO Programma Descrizione programma Delicati Tessuti delicati quali ad esempio acrilici, viscosa e tessuti misti che richiedono un lavaggio più delicato. Sporco normale. 17 Lana lavabile a macchina, a mano e altri tessuti con simbolo Lana/Seta "lavaggio a mano".1). Programma vapore Programma vapore per capi in cotone e sintetici. Il vapore Vapore Refresh può essere usato per asciugare2), lavati o indossati dopo il bucato. Questo programma riduce le pieghe e gli odori3) e rilassa le fibre.
www.aeg.com Programma Outdoor Descrizione programma Non usare ammorbidente e fare in modo che non vi siano residui di ammorbidente nel cassetto del detersivo. Asciugatura per indumenti per l'aria aperta, tecnici, sportivi, in pile, giacche impermeabili e traspiranti, giacca aderente dotata di interno rimovibile o rivestimento isolante interno. Il carico di bucato consigliato è 2.5 kg.
ITALIANO Programma Temperatura predefinita Intervallo di temperatura Velocità massima di Carico massimo centrifuga Gamma velocità centrifuga Sintetici 40 °C 60 °C - A freddo 1200 giri/minuto 1200 giri/min - 400 giri/min 3 kg Delicati 40 °C 40 °C - A freddo 1200 giri/minuto 1200 giri/min - 400 giri/min 3 kg Lana/Seta 40 °C 40 °C - A freddo 1200 giri/minuto 1200 giri/min - 400 giri/min 1.5 kg - 1.5 kg Anti-Allergie 60 °C 1400 giri/minuto 1400 giri/min - 400 giri/min 8 kg 20 min.
www.aeg.com Sintetici Delicati Lana/Seta Anti-Allergie 20 min. - 3 kg Outdoor Piumoni Jeans Vapore Refresh Compatibilità opzioni programma Cotoni 20 Giri/Min.
ITALIANO 21 7.2 Woolmark Apparel Care - Blu Il lavaggio lana di questa apparecchiatura è stato approvato dalla Woolmark Company per lavare indumenti di lana con etichetta riportante la dicitura “lavaggio a mano” a patto che i capi vengano lavati seguendo le istruzioni riportate dal produttore della lavabiancheria. Per ulteriori istruzioni sull'asciugatura e sulla biancheria fare riferimento all'etichetta. M1623 Il simbolo Woolmark è un marchio di Certificazione in molti paesi. 8. IMPOSTAZIONI 8.
www.aeg.com 8.5 Più morbido Impostare l'opzione Più morbido per ottimizzare la distribuzione di ammorbidente e migliorare la morbidezza del tessuto. Per attivare/disattivare questa opzione toccare i tasti Temp.°C e Giri/Min. contemporaneamente fino a che l'indicatore non si accende/spegne sopra all'indicatore. Consigliamo di usare l'ammorbidente. Questa opzione aumenta leggermente la durata del programma. 9. PRIMA DI UTILIZZARE L'ELETTRODOMESTICO 1.
ITALIANO ATTENZIONE! Assicurarsi che non vi sia della biancheria tra la guarnizione e l’oblò. Sussiste il rischio di perdite di acqua o di arrecare danno alla biancheria. 10.3 Aggiunta di detersivi e additivi 23 10.4 Candeggina Con i programmi per i bianchi, in alternativa all'ammorbidente, è possibile versare nello scomparto candeggiante. Procedere come segue: anche un 1. Versare la candeggina nella vaschetta . Non superare il simbolo «MAX» all'interno del cassetto del detersivo. 2.
www.aeg.com 4. Per utilizzare il detersivo liquido, ruotare l'inserto verso il basso. Accertarsi che l'inserto non venga bloccato quando si chiude il cassetto. 10.6 Impostazione di un programma Con l'inserto in posizione ABBASSATA: • Non utilizzare detersivi in gel o densi. • Non versare il detersivo liquido oltre il limite indicato sull'inserto. • Non impostare la fase di prelavaggio. • Non impostare la funzione partenza ritardata. 5. Dosare il detersivo e l'ammorbidente. 6.
ITALIANO Il programma si avvia, l'oblò si blocca. Il display mostra la spia . La pompa di scarico funziona brevemente prima che l'apparecchiatura si riempia di acqua. 10.8 Avvio del programma con partenza ritardata 1. Toccare ripetutamente il tasto Partenza Ritardata finché il display non mostra il ritardo desiderato. La spia si accende. 2. Sfiorare il tasto Avvio/Pausa. L'apparecchiatura inizia il conto alla rovescia della partenza ritardata.
www.aeg.com 10.12 Annullamento di un programma in corso Il rilevamento ProSense avviene solo con i programmi di lavaggio completi (quando non è selezionato nessun salto di fase). 1. Premere il tasto On/Off per annullare il programma e per spegnere l'apparecchiatura. 2. Premere nuovamente il tasto On/Off per accendere l'apparecchiatura. A questo punto è possibile impostare un nuovo programma di lavaggio. 10.
ITALIANO 10.14 Termine del programma Appena il programma è completato, l'apparecchiatura si ferma automaticamente. Se attivi, vengono emessi dei segnali acustici. Nel display tutte le spie della fase di lavaggio diventano fisse e viene visualizzata la zona tempo . La spia del tasto Avvio/Pausa si spegne. L'oblò si sblocca e la spia dell'oblò bloccato si spegne. 1. Premere il pulsante On/Off per disattivare l’apparecchiatura.
www.aeg.com Se si imposta un programma o un'opzione che termina con l'acqua nel cesto, la funzione Stand-by non disattiva l'apparecchiatura per ricordarvi di scaricare l'acqua. 11. CONSIGLI E SUGGERIMENTI UTILI AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 11.1 Il carico di biancheria • Suddividere la biancheria in: bianchi, colorati, sintetici, delicati e lana. • Attenersi alle istruzioni di lavaggio indicate nelle etichette dei capi. • Non lavare insieme capi bianchi e colorati.
ITALIANO • Usare i detersivi consigliati per il tipo e il colore di tessuto, la temperatura del programma e il livello di sporco. 29 dell’acqua dell'impianto domestico. Fare riferimento a "Durezza dell'acqua". 11.4 Consigli ecologici 11.5 Durezza acqua • Impostare un programma senza la fase di prelavaggio per lavare la biancheria normalmente sporca. • Avviare un programma di lavaggio con il carico massimo di biancheria consentito.
www.aeg.com 12.4 Guarnizione dell'oblò 1 2 Controllare regolarmente la guarnizione e rimuovere tutti gli oggetti presenti nella parte interna. 12.5 Pulizia del cesto Controllare regolarmente il cesto per evitare la formazione di ruggine. Per una pulizia completa: 1. Pulire il cesto con prodotti adatti all’acciaio inossidabile. 2.
ITALIANO 31 2 1 12.7 Pulizia della pompa di scarico AVVERTENZA! Scollegare la spina dalla presa di corrente. 2. Collocare una ciotola adatta sotto all'accesso della pompa di scarico per raccogliere l'acqua che fuoriesce. 3. Aprire lo scivolo verso il basso. Tenere sempre a portata di mano uno straccio per asciugare l'acqua che potrebbe fuoriuscire quando si toglie il filtro. Controllare a intervalli regolari il filtro della pompa di scarico e verificare che sia pulito.
www.aeg.com 6. Ripetere i passaggi 4 e 5 fino a che l'acqua non smette di fuoriuscire. 7. Ruotare il filtro in senso antiorario per estrarlo. 2 1 1 2 12. Chiudere il coperchio della pompa. 8. Se necessario, togliere la lanugine e gli oggetti dall'incasso del filtro. 9. Assicurarsi che il girante della pompa possa ruotare. Se non ruota, contattare il Centro di Assistenza Autorizzato. 2 1 10. Pulire il filtro sotto al rubinetto dell'acqua.
ITALIANO 33 1 2 45° 3 20° 2. Togliere il tubo di ingresso dall'apparecchiatura allentato il dado dell'anello. 12.9 Scarico di emergenza Qualora il dispositivo non scarichi acqua, eseguire la stessa procedura descritta nel paragrafo "Pulizia del filtro di scarico". Se necessario, pulire la pompa. Quando si scarica l’acqua utilizzando la procedura di scarico di emergenza, è necessario attivare di nuovo il sistema di scarico: 3. Pulire il filtro valvola sul retro dell'apparecchiatura con una spazzola.
www.aeg.com AVVERTENZA! Accertarsi che la temperatura sia superiore a 0°C prima di utilizzare nuovamente l'apparecchiatura. Il produttore declina ogni responsabilità per danni causati da basse temperature. 13. RISOLUZIONE DEI PROBLEMI AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 13.1 Introduzione L'apparecchiatura non si avvia o si blocca durante il funzionamento. Cercare dapprima di risolvere il problema (fare riferimento alla tabella).
ITALIANO 35 13.2 Possibili guasti Problema Possibile soluzione Il programma non si avvia. • Verificare che la spina sia collegata alla presa elettrica. • Controllare che l’oblò dell’apparecchiatura sia chiuso. • Assicurarsi che il fusibile all'interno del quadro elettrico non sia danneggiato. • Assicurarsi di aver premuto il tasto Avvio/Pausa. • Se è stata impostata la Partenza ritardata, annullare l'impostazione o attendere il termine del conto alla rovescia.
www.aeg.com Problema Possibile soluzione • Assicurarsi che i raccordi dei tubi dell'acqua siano serrati e non vi siano perdite d'acqua. Presenza di acqua sul pa- • Verificare che i tubi di carico e scarico dell'acqua non siano vimento. danneggiati. • Assicurarsi di utilizzare il detersivo adeguato e la giusta quantità. Non è possibile aprire l'oblò. • Verificare che sia stato selezionato un programma di lavaggio che si conclude con l'acqua nella vasca.
ITALIANO 37 Una volta effettuati questi controlli, attivare l’apparecchiatura. Il programma riprende dal punto in cui era stato interrotto. In caso di ricomparsa dell'anomalia, contattare il Centro di Assistenza Autorizzato. Se il display mostra altri codici di allarme. Attivare e disattivare l'apparecchiatura. In caso di ricomparsa dell'anomalia, contattare il Centro di Assistenza Autorizzato. 13.
www.aeg.com 14. VALORI DI CONSUMO I valori indicati sono stati ottenuti in condizioni di laboratorio con standard pertinenti. I dati possono essere influenzati da diversi fattori: la quantità e il tipo di biancheria e la temperatura dell'ambiente. Anche la pressione dell'acqua, la tensione di alimentazione e la temperatura dell'acqua in ingresso possono influire sulla durata del programma di lavaggio. Le specifiche tecniche possono variare senza preavviso al fine di migliorare la qualità del prodotto.
ITALIANO 39 15.
www.aeg.com Leggere attentamente le istruzioni fornite con l'apparecchiatura e con l'accessorio. Verificare il kit di impilatura compatibile controllando la profondità delle proprie apparecchiature. Il kit di installazione in colonna può essere usato solo con le apparecchiature indicate nel libretto fornito con l'accessorio. AVVERTENZA! Non sistemare l'asciugabiancheria sotto alla lavabiancheria. 17. CONSIDERAZIONI SULL'AMBIENTE Riciclare i materiali con il simbolo .
ITALIANO 41
www.aeg.
ITALIANO 43
157002723-A-492017 www.aeg.