L7FED164E USER MANUAL FR Notice d'utilisation Lave-linge
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................3 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. INSTALLATION............................................................................................................6 4. ACCESSOIRES........................................................................................................... 11 5.
FRANÇAIS 3 Sous réserve de modifications. 1. INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com 1.2 Sécurité générale • • • • • • • • • • • Ne modifiez pas les caractéristiques de cet appareil. Cet appareil est conçu uniquement pour un usage domestique et des situations telles que : – dans des cuisines réservées aux employés dans des magasins, bureaux et autres lieux de travail ; – pour une utilisation privée, par les clients, dans des hôtels et autres lieux de séjour ; – dans les parties communes d'immeubles d'appartements, ou dans les laveries automatiques.
FRANÇAIS 5 2. CONSIGNES DE SÉCURITÉ 2.1 Installation L'installation doit être confirme aux réglementations nationales en vigueur. • Retirez l'intégralité de l'emballage et les boulons de transport, y compris le joint en caoutchouc et l'entretoise en plastique. • Conservez les boulons de transport en lieu sûr. Si l'appareil doit être de nouveau déplacé, les boulons doivent être réutilisés pour maintenir le tambour en place et éviter tout dégât interne.
www.aeg.com • N'utilisez pas de rallonge si le tuyau d'alimentation est trop court. Contactez le service après-vente agréé pour remplacer le tuyau d'alimentation. • Il est possible de voir de l'eau s'écouler du tuyau d'évacuation. Cette eau provient des tests effectués sur l'appareil en usine. • La longueur maximale du tuyau de vidange est de 400 cm. Contactez le service après-vente agréé pour obtenir d'autres longueurs de tuyaux de vidange et des rallonges. 2.
FRANÇAIS 7 7. Retirez la protection en polystyrène en bas de l'appareil. 1 3. Retirez le film interne. 2 8. Remettez l'appareil en position verticale. 4. Ouvrez le hublot et retirez la cale en polystyrène du joint du hublot, ainsi que tous les articles présents dans le tambour. 9. Retirez le câble d'alimentation électrique et le tuyau de vidange de leurs supports. Il est possible de voir de l'eau s'écouler du tuyau d'évacuation. Cette eau provient des tests effectués sur l'appareil en usine. 5.
www.aeg.com 11. Retirez les entretoises en plastique. 12. Placez les caches en plastique, fournis dans le sachet du manuel d'utilisation, dans les trous. x4 L'appareil doit être de niveau et stable. Une mise de niveau correcte évite les vibrations, le bruit ou des déplacements de l'appareil au cours de son fonctionnement. Nous vous recommandons de conserver l'emballage et les boulons de transport en vue d'un éventuel déplacement de l'appareil. 3.
FRANÇAIS 9 La partie rouge dans la fenêtre « A » témoigne de ce dysfonctionnement. 45 20 O O A Dans ce cas, fermez le robinet d'arrivée d'eau et contactez le service après-vente agréé pour faire remplacer le tuyau. Assurez-vous que le tuyau d'arrivée d'eau n'est pas en position verticale. 3. Si nécessaire, desserrez la bague de serrage pour bien le positionner. 4. Raccordez le tuyau d'arrivée d'eau à un robinet d'eau froide fileté (3/4 pouce). 3.
www.aeg.com Vérifiez que l'extrémité du tuyau de vidange n'est pas plongée dans l'eau. Il pourrait y avoir un reflux d'eau sale dans l'appareil. 3. À une conduite fixe dotée d'une ventilation spéciale : insérez directement le tuyau dans la conduite d'évacuation. Reportezvous à l'illustration. L'extrémité du tuyau de vidange doit être ventilée en permanence, c'est-à-dire que le diamètre interne du conduit d’évacuation (minimum 38 mm - min.
FRANÇAIS 11 4. ACCESSOIRES 4.1 Disponible sur www.aeg.com/shop ou chez un revendeur agréé Seuls les accessoires appropriés et agréés par AEG peuvent répondre aux normes de sécurité de l'appareil. Si les pièces ne sont pas agréées, toute réclamation sera refusée. Assurez-vous de la compatibilité du kit de superposition en vérifiant la profondeur de vos appareils. Le kit de superposition peut uniquement être utilisé avec les appareils indiqués dans la brochure fournie avec l'accessoire.
www.aeg.com mesure pour la charge et le type de linge, sans consommer davantage de temps, d'énergie ou d'eau que nécessaire. • La vapeur est un moyen rapide et simple de rafraîchir les vêtements. Les programmes à la vapeur éliminent les odeurs et les plis en douceur sur les textiles secs, facilitant ainsi le repassage. L'option Vapeur Plus termine chaque cycle par une phase de vapeur douce qui détend les fibres et réduit le froissage.
FRANÇAIS 13 6. BANDEAU DE COMMANDE 6.
www.aeg.com 6.2 Affichage MIX Voyant de charge maximale. Le voyant clignote lors de l'estimation de la charge de linge (consultez le paragraphe « Détection de la charge ProSense »). Voyant de charge maximale. Il clignote si la charge de linge dépasse la charge déclarée. Voyant Hublot verrouillé. Indicateur Départ différé. L'indicateur numérique peut afficher : • La durée du programme (par ex. • Le départ différé (par ex. ou ). ). • La fin du cycle ( ). • Un code d'alarme (par ex. ).
FRANÇAIS 15 Voyant Gain de temps. Indicateur de vitesse d'essorage. Voyant Arrêt cuve pleine. Indicateur Extra silence. Indicateur de température. Le voyant tionnez un lavage à froid. apparaît lorsque vous sélec- 7. MANETTES ET TOUCHES 7.1 Marche/Arrêt 7.3 Temp. Appuyez sur cette touche pendant quelques secondes pour allumer et éteindre l'appareil. Deux différents signaux sonores retentissent lorsque vous allumez ou éteignez l'appareil.
www.aeg.com Si vous appuyez sur la touche Départ/ Pause, l'appareil effectue une phase d'essorage et vidange l'eau. L'appareil vidange l'eau automatiquement au bout d'environ 18 heures. • Activer l'option Extra Silence. Les phases d'essorage intermédiaire et final sont supprimées et le programme se termine avec de l'eau dans le tambour. Cela réduit le froissage du linge. s'allume sur L'indicateur l'affichage. Le hublot reste verrouillé.
FRANÇAIS 7.6 Vapeur Plus Cette option ajoute une phase vapeur, suivie par une courte phase antifroissage à la fin du programme de lavage. La phase vapeur réduit les plis sur le linge et facilite son repassage. clignote sur l'affichage L'indicateur durant la phase vapeur. Cette option peut rallonger la durée du programme. Lorsque le programme s'arrête, un zéro s'affiche , le voyant est fixe et le commence à clignoter.
www.aeg.com Si vous sélectionnez le programme Coton à 40 °C ou 60 °C et qu'une autre option n'est sélectionnée, l'indicateur s'affiche ; il s'agit des programmes standard pour le coton, les plus efficaces en termes de consommations d'eau et d'énergie combinées. 7.11 Départ/Pause Appuyez sur la touche Départ/Pause pour démarrer l'appareil, le mettre en pause ou interrompre un programme en cours. 8. PROGRAMMES 8.
FRANÇAIS Programme 19 Description du programme Programme vapeur pour les articles en coton et textiles Vapeur synthétiques. La vapeur peut être utilisée pour le linge sec2) Linge propre ou porté une seule fois. Ce programme réduit les plis et les odeurs3) et détend les fibres. Lorsque le programme est terminé, retirez rapidement le linge du tambour. Après un programme Vapeur, le repassage est facilité. N'utilisez aucun produit de lavage.
www.aeg.com Programme Outdoor Description du programme N'utilisez pas d'adoucissant et assurez-vous que le distributeur de produit de lavage ne contient pas de résidus d'adoucissant. Vêtements d'extérieur, de travail, de sport, imperméables et tissus perméables à l'air, vestes à molleton ou doublure isolante amovibles. La charge de linge recommandée est de 2.5 kg. Ce programme peut également être utilisé comme cycle de restauration de l'imperméabilité.
FRANÇAIS Programme Température par défaut Plage de températures Vitesse d'essorage de référence Plage de vitesses d'essorage Blanc/Couleurs 40 °C 95 °C - Froid 1600 tr/min 1600 tr/min 400 tr/min 10 kg Synthétiques 40 °C 60 °C - Froid 1200 tr/min 1200 tr/min 400 tr/min 4 kg Délicats 40 °C 40 °C - Froid 1200 tr/min 1200 tr/min 400 tr/min 4 kg Laine/Soie 40 °C 40 °C - Froid 1200 tr/min 1200 tr/min 400 tr/min 1.5 kg Charge maximale Programme vapeur - Vapeur - 1.
www.aeg.com Délicats Laine/Soie Anti-Allergie 20 min.
FRANÇAIS 23 8.2 Woolmark Apparel Care - Bleu Le cycle Laine de cet appareil a été approuvé par la société Woolmark pour le lavage des vêtements en laine portant une étiquette « lavage à la main », sous réserve que les vêtements soient lavés conformément aux instructions du fabricant de ce lave-linge. Consultez l'étiquette d'entretien du vêtement pour plus d'instructions sur le séchage et le lavage. M1230 Le symbole Woolmark est une marque de certification dans de nombreux pays. 9. RÉGLAGES 9.
www.aeg.com 9.5 Douceur Plus Sélectionnez l'option Douceur Plus pour optimiser la distribution d'assouplissant et rendre le linge plus doux. Il est recommandé lorsque vous utilisez de l'assouplissant. Pour activer/désactiver cette option, appuyez simultanément sur les touches Temp. et Options jusqu'à ce que le voyant s'allume/s'éteigne au-dessus de l'indicateur . Cette option augmente légèrement la durée du programme. 10.
FRANÇAIS 25 Suivez toujours les instructions imprimées sur l'emballage des produits de lavage, mais nous vous recommandons de ne pas dépasser le niveau maximal indiqué ( ). Cette quantité vous garantira les meilleurs résultats de lavage. ATTENTION! Veillez à ce qu'il n'y ait pas de linge coincé entre le joint et le hublot. Cela pourrait provoquer une fuite d'eau ou endommager le linge. 11.
www.aeg.com 4. Pour utiliser de la lessive liquide, tournez le volet vers le bas. Avec le volet en position BASSE : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne versez pas de lessive liquide audelà du niveau maximal indiqué sur le volet. • Ne sélectionnez pas de phase de prélavage. • Ne sélectionnez pas la fonction Départ différé. 5. Dosez le produit de lavage et l'assouplissant. 6. Fermez soigneusement le distributeur de produit de lavage. 11.5 Réglage d'un programme 1.
FRANÇAIS L'appareil démarre le décompte du départ différé. Lorsque le décompte est terminé, le programme démarre. L'estimation de la fonction PROSENSE démarre à la fin du décompte. Annulation du départ différé au cours du décompte Pour annuler le départ différé : 1. Appuyez sur la touche Départ/Pause pour mettre l'appareil en pause. Le voyant correspondant clignote. 2. Appuyez à plusieurs reprises sur la touche Départ Différé jusqu'à ce que s'affiche. 3.
www.aeg.com Par ex., la phase de lavage ou de prélavage est en cours : . Lorsque la phase se termine, le voyant correspondant cesse de clignoter et reste fixe. Le voyant de la phase suivante commence à clignoter. Par ex., la phase de rinçage est en cours : . Si vous sélectionnez Vapeur Plus, les voyants de la phase à la vapeur s'allument. La phase à la vapeur est en cours : .
FRANÇAIS Sur l'affichage, tous les voyants de la phase de lavage sont fixes et l'affichage du temps indique . Le voyant de la touche Départ/Pause s'éteint. Le hublot se déverrouille et le voyant s'éteint. 1. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil. Cinq minutes après la fin du programme, la fonction d'économie d'énergie éteint automatiquement l'appareil. 2. 3. 4. 5. Lorsque vous rallumez l'appareil, le dernier programme sélectionné s'affiche.
www.aeg.com 12. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 12.1 Chargement du linge • Séparez le linge en fonction des articles : blancs, de couleurs, synthétiques, délicats et en laine. • Respectez les instructions de lavage qui figurent sur les étiquettes des vêtements. • Ne lavez pas les articles blancs et de couleur ensemble. • Certains articles de couleurs peuvent déteindre lors des premiers lavages. Il est recommandé de les laver séparément les premières fois.
FRANÇAIS • Commencez toujours un programme de lavage avec une charge de linge maximale. • Pour prétraiter les taches, vous pouvez utiliser un détachant si vous sélectionnez un programme à basse température. • Pour utiliser la bonne quantité de produit de lavage, vérifiez la dureté de l'eau de votre système domestique. Reportez-vous au chapitre « Dureté de l'eau ». 31 recommandé d'utiliser un adoucisseur d'eau pour lave-linge.
www.aeg.com 13.4 Joint du hublot 13.6 Nettoyage du distributeur de produit de lavage Pour éviter les dépôts de lessive séchée, d'assouplissant coagulé et/ou la formation de moisissures dans le distributeur de produit de lavage, veillez à effectuer régulièrement la procédure de nettoyage suivante : Examinez régulièrement le joint et enlevez tous les objets situés à l'intérieur. 13.5 Nettoyage du tambour Examinez régulièrement le tambour pour éviter le dépôt de particules indésirables.
FRANÇAIS 33 AVERTISSEMENT! • Ne retirez pas le filtre pendant que l'appareil fonctionne. • Ne nettoyez pas la pompe si l'eau de l'appareil est chaude. Attendez que l'eau refroidisse. 4. Réinstallez le distributeur de lavage dans ses rails et fermez-le. Lancez un programme de rinçage sans vêtement dans le tambour. Pour nettoyer la pompe, procédez comme suit : 1. Ouvrez le couvercle de la pompe. 2 1 13.
www.aeg.com 5. Lorsque le récipient est plein d'eau, remettez le filtre en position et videz le récipient. 6. Répétez les étapes 4 et 5 jusqu'à ce que l'eau cesse de s'écouler. 7. Tournez le filtre vers la fauche pour le retirer. 11. Replacez le filtre dans les guides spéciaux en le tournant vers la droite. Assurez-vous de serrer correctement le filtre afin d'empêcher toute fuite. 2 1 12. Fermez le couvercle de la pompe. 1 2 8. Si nécessaire, retirez les peluches et objets du logement du filtre.
FRANÇAIS 13.8 Nettoyage du tuyau d'arrivée d'eau et du filtre de la vanne Il est recommandé de nettoyer occasionnellement les deux filtres du tuyau d'arrivée d'eau et la valve pour éliminer les dépôts accumulés avec le temps : 35 4. Lorsque vous rebranchez le tuyau à l'arrière de l'appareil, tournez-le vers la gauche ou la droite (et non en position verticale) en fonction de la position du robinet. 1. Retirez le tuyau d'arrivée d'eau du robinet et nettoyez le filtre. 1 45° 20° 2 13.
www.aeg.com AVERTISSEMENT! Assurez-vous que la température est supérieure à 0 °C avant d'utiliser à nouveau l'appareil. Le fabricant ne pourra être tenu pour responsable en cas de dommages dus aux basses températures. 14. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 14.1 Introduction L'appareil ne démarre pas ou s'arrête en cours de programme. Dans un premier temps, essayez de trouver une solution au problème (reportez-vous au tableau).
FRANÇAIS 37 14.2 Pannes possibles Problème Le programme ne démarre pas. Solution possible • Assurez-vous que la fiche du câble d'alimentation est bien insérée dans la prise de courant. • Vérifiez que le hublot de l'appareil est fermé. • Assurez-vous qu'aucun fusible n'est grillé dans la boîte à fusibles. • Vérifiez que vous avez bien appuyé sur la touche Départ/ Pause. • Si vous avez sélectionné un départ différé, annulez-le ou attendez la fin du décompte.
www.aeg.com Problème Solution possible Il y a de l'eau sur le sol. • Assurez-vous que les raccords des tuyaux d'eau sont bien serrés et qu'il n'y a aucune fuite d'eau. • Assurez-vous que le tuyau d'arrivée d'eau et le tuyau de vidange ne sont pas endommagés. • Assurez-vous d'utiliser une lessive adaptée en quantité correcte. • Vérifiez si vous avez sélectionné un programme de lavage se terminant avec de l'eau dans la cuve. • Assurez-vous que le programme de lavage est terminé.
FRANÇAIS 14.3 Ouverture d'urgence du hublot En cas de panne d'alimentation ou d'anomalie de l'appareil, le hublot reste verrouillé. Le programme de lavage continue dès que l'alimentation est rétablie. Si le hublot reste verrouillé en cas d'anomalie, il est possible de l'ouvrir à l'aide du dispositif de déverrouillage d'urgence. Avant d'ouvrir le hublot : 39 Pour ouvrir le hublot, procédez comme suit : 1. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil. 2.
www.aeg.com Au cours du programme de lavage, la technologie Prosense peut faire varier la durée du lavage et les valeurs de consommation. Pour plus de détails, consultez le paragraphe« La détection de charge Prosense » du chapitre « Utilisation quotidienne ». Programmes Charge (kg) Consommation énergétique (kWh) Blanc/Couleurs 60 °C 10 1.70 85 205 44 Blanc/Couleurs 40 °C 10 1.30 85 205 44 Synthétiques 40 °C 4 0.78 55 130 35 Délicats 40 °C 4 0.60 63 91 35 1.5 0.
FRANÇAIS 41 Niveau de protection contre l'infiltration de particu- IPX4 les solides et d'humidité assuré par le couvercle de protection, excepté là où l'équipement basse tension ne dispose d'aucune protection contre l'humidité Pression de l'arrivée d'eau Minimale Maximale 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Eau froide Arrivée d'eau 1) Charge maximale Coton 10 kg Classe d’efficacité énergétique A+++ Vitesse d'essorage 1551 tr/min Vitesse d'essorage maximale 1) Raccordez le tuyau d'arrivée d'eau à
www.aeg.com 17.2 Nettoyage du filtre de la pompe de vidange 1 2 3 180˚ 1 2 Nettoyez régulièrement le filtre, tout particulièrement si le code d'alarme s'affiche. 17.3 Programmes Programmes Blanc/Couleurs Blanc/Couleurs Synthétiques Délicats Laine/Soie Vapeur Anti-Allergie 20 min. - 3 kg Charge 10 kg Coton blanc et couleurs. 10 kg Coton blanc et couleurs. Programmes standard pour les valeurs de consommation de l'étiquette énergétique. 4 kg Articles en textiles synthétiques ou mixtes.
FRANÇAIS Programmes Charge 10 kg Jeans 43 Description de l'appareil Des articles en jean ou en jersey. 1) Programme de lavage. 2) Programme de lavage et phase d'imperméabilisation. 18.
www.aeg.com Le « programme standard pour le coton à 60 °C » et le « programme standard pour le coton à 40 °C » sont les programmes de lavage standard utilisés pour les informations de l'étiquette énergétique et de la fiche produit. lls sont adaptés au nettoyage du linge en coton normalement sale et sont les programmes les plus efficaces en termes de consommation d'eau et d'énergie.
FRANÇAIS 45
www.aeg.
FRANÇAIS 47
157009642-A-392018 www.aeg.