L7FEE84W USER MANUAL DE Benutzerinformation Waschmaschine
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................5 3. MONTAGE................................................................................................................... 7 4. ZUBEHÖR...............................................................................................................
DEUTSCH 3 Änderungen vorbehalten. 1. SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com • • Falls Ihr Gerät mit einer Kindersicherung ausgestattet ist, empfehlen wir, diese einzuschalten. Kinder dürfen keine Reinigung und Wartung ohne Beaufsichtigung durchführen. 1.2 Allgemeine Sicherheit • • • • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor. Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH • • • 5 Reinigen Sie das Gerät nicht mit einem Wasser- und/ oder Dampfstrahl. Reinigen Sie das Gerät mit einem feuchten Tuch. Verwenden Sie ausschließlich Neutralreiniger. Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen, Lösungsmittel oder Metallgegenstände. Wird ein Wäschetrockner auf die Waschmaschine gestellt, muss der geeignete, von AEG zugelassene Bausatz Wasch-Trocken-Säule verwendet werden (siehe Abschnitt „Zubehör - Bausatz Wasch-TrockenSäule“). 2.
www.aeg.com • Schließen Sie das Gerät unbedingt an eine ordnungsgemäß installierte Schutzkontaktsteckdose an. • Stellen Sie sicher, dass die Daten auf dem Typenschild mit den elektrischen Nennwerten der Netzspannung übereinstimmen. • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen.
DEUTSCH • Schneiden Sie das Netzkabel in der Nähe des Geräts ab, und entsorgen Sie es. • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in der Trommel einschließen. 7 • Entsorgen Sie das Gerät nach den lokalen Vorschriften zur Rücknahme und Entsorgung von Elektroaltgeräten (WEEE). 3. MONTAGE WARNUNG! Siehe Kapitel Sicherheitshinweise. 3.1 Auspacken WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben.
www.aeg.com 7. Entfernen Sie den Styroporschutz von der Geräteunterseite. 1 2 8. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. 9. Entnehmen Sie das Netzkabel und den Ablaufschlauch aus den Schlauchhalterungen. Aus dem Ablaufschlauch könnte Wasser austreten. Dies ist auf den Gerätetest mit Wasser im Werk zurückzuführen. 10. Lösen Sie die drei Schrauben mit dem mitgelieferten Schraubenschlüssel. 11. Ziehen Sie die KunststoffAbstandshalter heraus. 12.
DEUTSCH WARNUNG! Schieben Sie weder Karton noch Holz oder ähnliche Materialien unter die Stellfüße, um das Gerät auszurichten. 3.3 Wasserzulaufschlauch 1. Schließen Sie den Wasserzulaufschlauch an der Rückseite der Maschine an. 2. Drehen Sie ihn nach links oder rechts, je nach Position des Wasserhahns. 45 20 O O x4 Das Gerät muss einen waagerechten und festen Stand haben.
www.aeg.com Verwenden Sie keinen Verlängerungsschlauch, falls der Zulaufschlauch zu kurz ist. Wenden Sie sich an den Kundendienst, um einen anderen Zulaufschlauch zu erhalten. 3.4 Aquastop-Vorrichtung Der Zulaufschlauch verfügt über eine Aquastop-Vorrichtung. Diese Vorrichtung verhindert Wasserlecks am Schlauch, die durch natürliche Alterung auftreten können. 2. Am Rande eines Beckens Befestigen Sie die Führung am Wasserhahn oder an der Wand.
DEUTSCH Das Ende des Ablaufschlauchs muss stets belüftet sein, d. h. der Innendurchmesser des Ablaufrohrs (min. 38 mm min. 1,5") muss größer sein als der Außendurchmesser des Ablaufschlauchs. 4. Sieht das Ende des Ablaufschlauchs wie in der Abbildung gezeigt aus, können Sie es direkt in das Standrohr drücken. 11 Stellen Sie sicher, dass der Ablaufschlauch einen Bogen beschreibt, damit keine Partikel aus dem Becken in das Gerät gelangen können. 6.
www.aeg.com genehmigten Bausatz Wasch-TrockenSäule auf der Waschmaschine montiert werden. Messen Sie die Tiefe Ihrer Geräte, um sich zu vergewissern, dass der Bausatz mit Ihren Geräten kompatibel ist. mitgelieferten Broschüre aufgeführten Geräten verwendet werden. Lesen Sie die dem Gerät und dem Zubehör beiliegenden Anleitungen sorgfältig durch. WARNUNG! Stellen Sie den Wäschetrockner nicht unter die Waschmaschine. Der Bausatz Wasch-Trocken-Säule kann nur mit den in der mit dem Zubehör 5.
DEUTSCH 1 2 3 4 5 6 7 Arbeitsplatte Waschmittelschublade Bedienfeld Türgriff Typenschild Sieb der Ablaufpumpe Füße für die Ausrichtung des Geräts 8 9 10 11 12 13 Ablaufschlauch Anschluss des Zulaufschlauchs Netzkabel Transportschrauben Schlauchhalter 6. BEDIENFELD 6.1 Bedienfeldbeschreibung 3 2 1 Programma/Programme Eco Katoen Blanc/Couleurs Synthetica Synthétiques Fijne Was Délicats 4 Tijd Besparen Gain de temps Wol/Zijde Laine/Soie Stoom Vapeur Anti-Allergie Anti-Allergies Vlek.
www.aeg.com 11 Sensortaste Temperatur (Temp.°C) 12 Taste Ein/Aus (Aan /Uit - Marche/ Arrêt) 6.2 Display Anzeige der max. Beladung. Die Anzeige blinkt während der Messung der Wäschemenge (siehe Abschnitt ProSense Beladungserkennung). Anzeige des max. zulässigen Wäschegewichts. Sie blinkt, wenn die Beladung das für das eingestellte Programm angegebene Gewicht überschreitet. Türverriegelungsanzeige. Zeitvorwahlanzeige. Die Digitalanzeige zeigt Folgendes an: • Programmdauer (z. B. • Zeitvorwahl (z. B.
DEUTSCH 15 Kindersicherungsanzeige. Energiesparanzeigen. Die Anzeige erscheint, wenn ein Baumwollprogramm mit 40 °C oder 60 °C gewählt wird. Zeitsparanzeige. Schleuderdrehzahlanzeige. Spülstoppanzeige. Anzeige Extra Leise. Temperaturanzeige. Die Anzeige mit kaltem Wasser gewählt wurde. erscheint, wenn ein Waschgang 7. PROGRAMMWAHLSCHALTER UND TASTEN 7.1 Aan /Uit - Marche/Arrêt Halten Sie diese Taste einige Sekunden lang gedrückt, um das Gerät ein- oder auszuschalten.
www.aeg.com 7.4 TPM Wenn Sie ein Programm auswählen, stellt das Gerät automatisch die höchste Schleuderdrehzahl ein. Drücken Sie diese Taste wiederholt, um: • Die Schleuderdrehzahl zu reduzieren. Das Display zeigt nur die Schleuderdrehzahlen an, die für das eingestellte Programm verfügbar sind. • Die Option Spülstopp einzuschalten. Der letzte Schleudergang wird nicht ausgeführt. Das Wasser des letzten Spülgangs wird nicht abgepumpt, um das Knittern der Wäsche zu verhindern.
DEUTSCH • Vlekken - Taches Wählen Sie diese Option, um dem Programm eine Phase zur Entfernung von Flecken hinzuzufügen, die stark verschmutzte oder fleckige Wäsche mit einem Fleckentferner reinigt. Geben Sie den Fleckentferner in das . Der Fleckentferner wird in Fach der geeigneten Phase des Waschprogramms hinzugefügt. Diese Option ist nicht verfügbar bei einer Temperatur unter 40 °C. • Voorwas - Prélavage Wählen Sie diese Option, um vor dem Hauptwaschgang einen Vorwaschgang bei 30 °C durchzuführen.
www.aeg.com Berühren Sie die Taste einmal, um die Dauer zu verkürzen. • Berühren Sie die Taste bei geringerer Beladung zweimal, um ein besonders kurzes Programm einzustellen. Auf dem Display erscheint die Anzeige . Umgebungstemperatur, Art und Menge der Wäschestücke, von den eingestellten Funktionen, der Schleuderdrehzahl und von den Spannungsschwankungen im Stromnetz.
DEUTSCH Programm 19 Programmbeschreibung Pflegeleichtes oder Mischgewebe. Normal verschmutzt. Synthetica - Synthétiques Fijne Was - Délicats Empfindliche Wäsche, wie z. B. aus Acryl, Viskose und Mischgewebe, die schonend gewaschen werden muss.. Normal verschmutzt. Waschmaschinenfeste Wolle, handwaschbare Wolle und an- Wol/Zijde - Laine/Soie dere Gewebe mit dem „Handwäsche“-Pflegesymbol.1) Dampfprogramm Dampfprogramm für Baumwolle und pflegeleichte Wäsche.
www.aeg.com Programm Outdoor Programmbeschreibung Verwenden Sie keinen Weichspüler, und stellen Sie sicher, dass sich keine Weichspülerrückstände in der Waschmittelschublade befinden. Outdoorkleidung, Sportgewebe, imprägnierte und atmungsaktive Jacken, Jacken mit herausnehmbarem Fleeceteil oder Innenwattierung. Die empfohlene Beladung beträgt 2.5 kg.
DEUTSCH Programm Machine Clean 21 Programmbeschreibung Wartungszyklus mit Heißwasser zur Reinigung und Auffrischung der Trommel und zum Entfernen von Rückständen, die Gerüche absondern können. Schalten Sie dieses Programm einmal im Monat ein, um beste Ergebnisse zu erzielen. Nehmen Sie alle Gegenstände aus der Trommel, bevor Sie das Programm einschalten. Drehen Sie in der Waschmittelschublade die Klappe im Fach für den Hauptwaschgang nach oben.
www.aeg.com Programm Standardtemperatur Temperaturbereich Referenzschleuderdrehzahl Schleuderdrehzahlbereich Anti-Allergie - Anti-Allergies 60 °C 1400 U/min 1400 U/min – 400 U/min 8 kg 20 min. - 3 kg 30 °C 40 °C - 30 °C 1200 U/min 1200 U/min – 400 U/min 3 kg Outdoor 30 °C 40 °C – kalt 1200 U/min 1200 U/min – 400 U/min Jeans 40 °C 60 °C – kalt 1200 U/min 1200 U/min – 400 U/min 8 kg 60 °C 1200 U/min 1200 U/min – 400 U/min - Machine Clean Maximale Beladung 2.
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Plus Steam5) ■ ■ Soft Plus ■ ■ Extra Spoelen - Rinçage plus Nur Spülen 3) Tijd Besparen - Gain de Temps 4) Startuitstel - Départ Différé ■ ■ ■ ■ ■ Jeans ■ Voorwas - Prélavage Outdoor ■ 20 min.
www.aeg.com 8.2 Woolmark Apparel Care - Blau Das Waschprogramm Wolle dieser Maschine wurde von der Firma Woolmark auf das Waschen von Wolltextilien mit der Pflegekennzeichnung „Handwäsche“ getestet und zugelassen, vorausgesetzt, dass die Wäsche gemäß der Anleitung auf dem Kleidungsetikett und gemäß den Angaben des Maschinenherstellers gewaschen wird. Beachten Sie die Trocken- und Waschanleitung auf dem Kleidungsetikett. M1623 Das Woolmark Symbol ist in vielen Ländern ein Zertifizierungszeichen. 9.
DEUTSCH Prélav. gleichzeitig, bis die Kontrolllampe der Taste Extra Spoelen - Rinçage plus aufleuchtet/ erlischt. 9.5 Soft Plus Schalten Sie die Option Soft Plus ein, um die Verteilung des Weichspülers zu optimieren und die Weichheit der Wäsche zu verbessern. 25 Mit dieser Option verlängert sich die Programmdauer leicht. Berühren Sie zum Ein-/Ausschalten dieser Option die Tasten Temp.°C und über TPM gleichzeitig, bis das Symbol der Anzeige leuchtet/erlischt.
www.aeg.com 2. Schütteln Sie jedes Wäschestück leicht aus, bevor Sie es in das Gerät legen. 3. Geben Sie jedes Wäschestück einzeln in die Trommel. Achten Sie darauf, nicht zu viel Wäsche einzufüllen. 4. Drücken Sie die Tür fest zu. Maximaler Füllstand für flüssige Pflegemittel. Klappe für Waschpulver oder Flüssigwaschmittel. Halten Sie sich immer an die Anweisungen auf der Verpackung der Waschmittel. Wir empfehlen Ihnen aber, die Höchstmenge ( ) nicht zu überschreiten.
DEUTSCH 4. Drehen Sie die Klappe nach unten, wenn Sie Flüssigwaschmittel verwenden. 27 Achten Sie darauf, dass die Klappe beim Schließen der Waschmittelschublade nicht blockiert. 11.5 Einstellen eines Programms Klappe in der UNTEREN Position: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. • Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Markierungslinie auf der Klappe. • Stellen Sie nicht den Vorwaschgang ein. • Stellen Sie nicht die Zeitvorwahl ein. 5.
www.aeg.com Die zugehörige Kontrolllampe hört auf zu blinken und leuchtet konstant. Im Display blinkt die Anzeige der Programmphase und die Anzeige der maximalen Beladung erlischt. Das Programm startet, die Tür ist verriegelt. Auf dem Display erscheint die Anzeige . Die Ablaufpumpe kann vor dem Wassereinlauf eine kurze Zeit laufen. 11.7 Starten eines Programms mit Zeitvorwahl 1. Berühren Sie die Taste Startuitstel Départ Différé wiederholt, bis das Display die gewünschte Zeitvorwahl leuchtet.
DEUTSCH Etwa 20 Minuten nach dem Programmstart kann die Programmdauer in Abhängigkeit von der Wasseraufnahmefähigkeit der Wäsche erneut angepasst werden. Die ProSense Erkennung wird nur bei vollständigen Waschprogrammen ausgeführt (wenn keine Phase übersprungen wird). 11.9 Programmphasenanzeigen Beim Programmstart blinkt die Anzeige der laufenden Phase und die anderen Phasenanzeigen leuchten konstant. Z. B. die Wasch- oder Vorwaschphase wird ausgeführt: .
www.aeg.com Das Programm bzw. die Zeitvorwahl läuft weiter. 11.13 Programmende Wenn das Programm beendet ist, schaltet sich das Gerät automatisch aus. Es ertönt ein Signalton (falls er aktiviert ist). Im Display leuchten alle Waschphasenanzeigen konstant und im Zeitbereich erscheint . Die Kontrolllampe der Taste Start/Pauze - Départ/Pause erlischt. Die Tür wird entriegelt und die Anzeige erlischt. 1. Drücken Sie die Taste Aan /Uit Marche/Arrêt, um das Gerät auszuschalten.
DEUTSCH Drehen Sie den Programmwahlschalter, um ein neues Programm einzustellen. 31 Haben Sie ein Programm oder eine Option gewählt, das/die mit Wasser in der Trommel endet, schaltet die Standby-Funktion das Gerät nicht aus, um Sie daran zu erinnern, dass das Wasser abgepumpt werden muss. 12. TIPPS UND HINWEISE WARNUNG! Siehe Kapitel Sicherheitshinweise. 12.1 Beladung • Teilen Sie die Wäsche auf, und zwar in: Kochwäsche, Buntwäsche, Synthetik, Feinwäsche und Wolle.
www.aeg.com • Mischen Sie nicht verschiedene Waschmittel. • Verwenden Sie der Umwelt zuliebe nicht mehr als die empfohlene Waschmittelmenge. • Halten Sie sich an die Anweisungen auf der Verpackung der Wasch- und Pflegemittel und überschreiten Sie nicht die Höchstmenge ( ). • Verwenden Sie die empfohlenen Waschmittel für Art und Farbe des Gewebes, Programmtemperatur und Verschmutzungsgrad. 12.4 Umwelttipps • Stellen Sie zum Waschen normal verschmutzter Wäsche ein Programm ohne Vorwäsche ein.
DEUTSCH Temperaturen kann zu Waschmittel- und Flusenansammlungen und Bakterienbildung in der Trommel und im Bottich führen. So können unangenehme Gerüche und Schimmel entstehen. Um diese Ablagerungen zu entfernen und das Innere der Maschine zu entkeimen, führen Sie regelmäßig (mindestens einmal im Monat) einen Waschgang zur Pflege der Maschine durch. 1. Nehmen Sie die Wäsche aus der Trommel. 2. Starten Sie ein Programm für Baumwolle mit der maximalen Temperatur und einer kleinen Menge Waschpulver. 33 13.
www.aeg.com WARNUNG! • Entfernen Sie das Sieb nicht, während das Gerät in Betrieb ist. • Reinigen Sie die Ablaufpumpe nicht, wenn das Wasser im Gerät heiß ist. Warten Sie, bis das Wasser abgekühlt ist. 4. Setzen Sie die Waschmittelschublade in die Führungsschienen ein und schließen Sie sie. Starten Sie das Spülprogramm ohne Wäsche in der Trommel. Gehen Sie zum Reinigen der Pumpe folgendermaßen vor: 1. Öffnen Sie die Pumpenabdeckung. 2 1 13.
DEUTSCH 35 10. Reinigen Sie das Sieb unter fließendem Wasser. 5. Wenn der Behälter voll ist, drehen Sie das Sieb zurück und leeren Sie den Behälter. 6. Wiederholen Sie die Schritte 4 und 5, bis kein Wasser mehr herausfließt. 7. Drehen Sie das Sieb gegen den Uhrzeigersinn, um es zu entfernen. 11. Setzen Sie das Sieb wieder in die dafür vorgesehenen Führungen ein und drehen Sie es im Uhrzeigersinn. Achten Sie darauf, dass Sie das Sieb richtig fest anziehen, um Wasserlecks zu vermeiden. 2 1 1 2 12.
www.aeg.com 13.8 Reinigen des Siebs des Zulaufschlauchs und Ventils Es wird empfohlen, das Sieb des Zulaufschlauchs und das des Ventils gelegentlich zu reinigen, um Ablagerungen zu entfernen, die sich mit der Zeit ansammeln. 4. Wenn Sie den Schlauch wieder an der Geräterückseite anbringen, drehen Sie ihn je nach Position des Wasserhahns nach rechts oder links (nicht in die vertikale Position). 1. Schrauben Sie den Zulaufschlauch vom Wasserhahn ab und reinigen Sie das Sieb. 1 45° 20° 2 13.
DEUTSCH 37 WARNUNG! Stellen Sie sicher, dass die Temperatur über 0 °C liegt, bevor Sie das Gerät wieder einschalten. Der Hersteller ist nicht für Schäden verantwortlich, die auf zu niedrige Temperaturen zurückzuführen sind. 14. FEHLERSUCHE Ist das Gerät überladen, nehmen Sie einige Wäschestücke aus der Trommel und/oder drücken Sie die Tür zu und berühren Sie gleichzeitig die Taste Start/Pauze - Départ/ Pause, bis die Anzeige WARNUNG! Siehe Kapitel Sicherheitshinweise. 14.
www.aeg.com zu. Wenden Sie sich an einen autorisierten Kundendienst. WARNUNG! Schalten Sie das Gerät vor der Überprüfung aus. 14.2 Mögliche Störungen Störung Das Programm startet nicht. Mögliche Abhilfe • Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist. • Achten Sie darauf, dass die Gerätetür geschlossen ist. • Vergewissern Sie sich, dass im Sicherungskasten keine Sicherung ausgelöst hat. • Stellen Sie sicher, dass Start/Pauze - Départ/Pause berührt wurde.
DEUTSCH 39 Störung Mögliche Abhilfe Das Gerät schleudert nicht oder das Waschprogramm dauert länger als gewöhnlich. • Stellen Sie das Schleuderprogramm ein. • Vergewissern Sie sich, dass das Ablaufsieb nicht verstopft ist. Reinigen Sie ggf. das Sieb. Siehe „Reinigung und Pflege“. • Verteilen Sie die Wäschestücke mit der Hand neu und starten Sie die Schleuderphase erneut. Das Problem kann durch eine Unwucht verursacht worden sein. Es befindet sich Wasser auf dem Boden.
www.aeg.com Störung Mögliche Abhilfe Zu viel Schaum in der Trommel während des Waschprogramms. • Reduzieren Sie die Waschmittelmenge. Nach dem Waschgang befinden sich Waschmittelrückstände in der Waschmittelschublade. • Stellen Sie sicher, dass sich die Klappe in der richtigen Position befindet (OBEN für Waschpulver - UNTEN für Flüssigwaschmittel). • Stellen Sie sicher, dass Sie die Waschmittelschublade gemäß den Anweisungen in dieser Bedienungsanleitung verwendet haben.
DEUTSCH 41 5. Nehmen Sie die Wäsche heraus und schließen Sie die Gerätetür. 6. Schließen Sie die Filterklappe. 15. VERBRAUCHSWERTE Die angegebenen Werte wurden unter Laborbedingungen gemäß den einschlägigen Normen gemessen. Folgende Faktoren können diese Werte verändern: Wäscheart und -menge sowie Raumtemperatur. Der Wasserdruck, die Versorgungsspannung und die Temperatur des einlaufenden Wassers können sich auch auf die Dauer des Waschprogramms auswirken.
www.aeg.com Programme Beladung (kg) Standardprogramm Baumwolle 60 °C Standardprogramm Baumwolle 60 °C Standardprogramm Baumwolle 40 °C EnergieWasserUngefähverbrauch verbrauch re Pro(kWh) (Liter) grammdauer (in Minuten) Restfeuchte (%)1) 8 0.70 54 230 52 4 0.50 41 230 52 4 0.50 42 230 52 1) Am Ende der Schleuderphase. Aus-Zustand (W) 0.30 Ein-Zustand (W) 0.
DEUTSCH 43 17. KURZANLEITUNG 17.1 Täglicher Gebrauch 2 3 1 4 • Stecken Sie den Netzstecker in die Netzsteckdose. • Öffnen Sie den Wasserhahn. • Drücken Sie Aan /Uit - Marche/Arrêt zum Einschalten des Geräts die Taste (1). • Drehen Sie den Programmwahlschalter auf das gewünschte Programm (2). • Stellen Sie die gewünschten Optionen mit den entsprechenden Sensortasten ein (3). • Legen Sie die Wäsche ein Mal in die Trommel, ohne die empfohlene Höchstmenge zu überschreiten.
www.aeg.com 17.3 Programme Programme Katoen - Blanc/Couleurs Katoen - Blanc/Couleurs Synthetica - Synthétiques Fijne Was - Délicats Wol/Zijde - Laine/Soie Stoom - Vapeur Anti-Allergie - Anti-Allergies 20 min. - 3 kg Beladung 8 kg Weiße und bunte Baumwollwäsche. 8 kg Weiße und bunte Baumwollwäsche. Standardprogramme für die auf dem Energielabel angegebenen Verbrauchswerte. 3 kg Pflegeleichte Wäschestücke oder Mischgewebe. 3 kg Feinwäsche, wie z. B. aus Acryl, Viskose, Polyester. 1.
DEUTSCH Energieeffizienzklasse A+++ Energierverbrauch in kWh/Jahr auf der Grundlage von 220 Standard-Waschzyklen für 60 °C und 40 °C Baumwollprogramme bei vollständiger Befüllung und Teilbefüllung sowie dem Verbrauchs der Betriebsarten mit geringer Leistungsaufnahme. Der tatsächliche Energieverbrauch hängt von der Art der Nutzung des Geräts ab. 137 Energieverbrauch des Standardprogramms „Baumwolle 60 °C“ bei vollständiger Befüllung in kWh 0.
www.aeg.com Einbaugerät J/N Nein Die in der Tabelle oben enthaltenen Informationen erfüllen die Verordnung (EU) 1015/2010 der Kommission zur Durchführung der Richtlinie EG/2009/125. 19. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie * Geräte mit diesem Symbol nicht mit dem Hausmüll.
DEUTSCH 47
157003154-A-352018 www.aeg.