L7WBR962E USER MANUAL FR Notice d'utilisation Lavante-séchante
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................3 2. CONSIGNES DE SÉCURITÉ........................................................................................6 3. INSTALLATION............................................................................................................7 4. DESCRIPTION DE L'APPAREIL.................................................................................12 5.
FRANÇAIS 3 Sous réserve de modifications. 1. INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com 1.2 Sécurité générale • • • • • • • • • • • • Ne modifiez pas les caractéristiques de cet appareil. L'appareil peut être installé de façon autonome ou sous un plan de travail si l'espace disponible le permet. L'appareil ne doit pas être installé derrière une porte à serrure, une porte coulissante ni une porte battante dotée d'une charnière du côté opposé à l'appareil qui pourrait empêcher l'ouverture complète de la porte.
FRANÇAIS • • • • • • • • • • 5 Si le câble d'alimentation est endommagé, il doit être remplacé par le fabricant, un service de maintenance agréé ou un technicien qualifié afin d'éviter tout danger lié à l'électricité. Retirez les peluches ou morceaux d'emballage accumulés autour de l'appareil.
www.aeg.com • • • température plus basse qui lui évitera de subir des dommages. Ne pulvérisez pas d'eau ni de vapeur à haute pression pour nettoyer l'appareil. Nettoyez l'appareil avec un chiffon humide. Utilisez uniquement des produits de lavage neutres. N'utilisez pas de produits abrasifs, de tampons à récurer, de solvants ni d'objets métalliques. Avant toute opération d'entretien, éteignez l'appareil et débranchez la fiche de la prise secteur. 2. CONSIGNES DE SÉCURITÉ 2.
FRANÇAIS jusqu'à ce qu'elle soit parfaitement propre et claire. • Pendant et après la première utilisation de l'appareil, vérifiez qu'aucune fuite n'est visible. 2.4 Utilisation AVERTISSEMENT! Risque de blessure, de choc électrique, d'incendie, de brûlures ou de dommage matériel à l'appareil. • Cet appareil est exclusivement destiné à une utilisation domestique.
www.aeg.com Assurez-vous de ne pas endommager les tuyaux. 2. Retirez la partie supérieure en carton et tous les matériaux d'emballage en polystyrène. 7. Retirez la protection en polystyrène en bas de l'appareil. 1 3. Retirez le film interne. 2 8. Remettez l'appareil en position verticale. 4. Ouvrez le hublot et retirez la cale en polystyrène du joint du hublot, ainsi que tous les articles présents dans le tambour. 9.
FRANÇAIS 9 Assurez-vous que la circulation de l'air sous l'appareil ne soit pas entravée par des tapis. Veillez à ce que l'appareil ne touche pas le mur ni d'autres éléments. 2. Desserrez ou serrez les pieds jusqu'à ce que l'appareil soit de niveau. 10. Dévissez les trois boulons à l'aide de la clé fournie avec l'appareil. AVERTISSEMENT! Ne placez ni carton, ni bois, ni autre matériau sous les pieds de l'appareil pour le mettre de niveau. 11. Retirez les entretoises en plastique. 12.
www.aeg.com 2. Placez-le vers la droite ou la gauche, en fonction de la position de votre robinet d'eau. 45 20 O O Assurez-vous que le tuyau d'arrivée d'eau n'est pas en position verticale. 3. Si nécessaire, desserrez la bague de serrage pour bien le positionner. 4. Raccordez le tuyau d'arrivée d'eau à un robinet d'eau froide fileté (3/4 pouce). ATTENTION! Assurez-vous que les raccords ne fuient pas. N'utilisez pas de rallonge si le tuyau d'alimentation est trop court.
FRANÇAIS Vérifiez que l'extrémité du tuyau de vidange n'est pas plongée dans l'eau. Il pourrait y avoir un reflux d'eau sale dans l'appareil. 3. À une conduite fixe dotée d'une ventilation spéciale : insérez directement le tuyau dans la conduite d'évacuation. Reportezvous à l'illustration. 11 5. Sans le guide de tuyau en plastique : Placez le tuyau de vidange dans le siphon et serrez-le avec une attache. Reportez-vous à l'illustration.
www.aeg.com 4. DESCRIPTION DE L'APPAREIL 4.
FRANÇAIS 13 5. BANDEAU DE COMMANDE 5.1 Description du bandeau de commande 3 2 1 Programme Minuterie Blanc/Couleurs Coton Eco Synthétiques Délicats Laine/Lavage à la main Outdoor Anti-Allergie Propre&Sec 60Min.
www.aeg.com Voyant de charge maximale. Le voyant clignote lors de l'estimation de la charge de linge (consultez le paragraphe « Détection de la charge PROSENSE »). Voyant de charge maximale. Il clignote lorsque la charge de linge dépasse la charge maximale prévue pour le programme sélectionné. Si vous lancez un programme alors que le tambour est surchargé, clignote également à la fin du programme. Indicateur du temps de séchage. Voyant Hublot verrouillé.
FRANÇAIS 15 6. MANETTES ET TOUCHES 6.1 Marche/Arrêt Appuyez sur cette touche pendant quelques secondes pour allumer et éteindre l'appareil. Deux différents signaux sonores retentissent lorsque vous allumez ou éteignez l'appareil. La fonction Veille éteint automatiquement l'appareil pour réduire la consommation d'énergie. Par conséquent, dans certains cas, il se peut que vous deviez le rallumer. Pour plus de détails, reportez-vous au paragraphe « Veille » du chapitre « Utilisation quotidienne ». 6.
www.aeg.com Cette option n'est pas disponible avec des températures de lavage inférieures à 40 °C. • Prélavage Utilisez cette option pour ajouter une phase de prélavage à 30 °C avant la phase de lavage. Cette option est recommandée pour le linge très sale, tout particulièrement s'il contient du sable, de la poussière, de la boue ou d'autres particules solides. Cette option peut rallonger la durée du programme. Cette option peut également être utilisée pour diminuer la durée du programme Vapeur. 6.
FRANÇAIS 6.11 Départ/Pause Appuyez sur la touche Départ/Pause pour démarrer l'appareil, le mettre en 17 pause ou interrompre un programme en cours. 7. PROGRAMMES 7.1 Tableau des programmes Programme Description du programme Programmes de lavage Blanc/Couleurs Coton Eco Synthétiques Délicats Coton blanc et couleurs. Normalement sale ou légèrement sale. Coton blanc et couleurs. Normalement sale ou légèrement sale. Programme Coton éco.
www.aeg.com Programme Anti-Allergie Description du programme Articles en coton blanc. Ce programme élimine les micro-organismes grâce à une phase de lavage à une température maintenue à plus de 60 °C pendant quelques minutes. Cela permet d'éliminer les germes, bactéries, micro-organismes et particules. Pour garantir une parfaite élimination des résidus de détergent et des particules de pollen ou autres allergènes sur les textiles, effectuez une phase de rinçage supplémentaire.
FRANÇAIS Programme Description du programme Rinçage Pour rincer et essorer le linge. Tous textiles, excepté la laine et les tissus très délicats. Réduisez la vitesse d'essorage en fonction du type de linge. 19 1) Durant ce cycle, le tambour tourne lentement pour garantir un lavage en douceur. Le tambour peut donner l'impression de ne pas tourner, ou de ne pas tourner correctement, mais son fonctionnement est normal pour ce programme.
www.aeg.com Programme Température par défaut Plage de températures Vitesse d'essorage maximale Plage de vitesses d'essorage Charge maximale 1.5 kg Vapeur 1600 tr/min 1600 tr/min 400 tr/min Rinçage 9 kg Tache1) Départ Différé ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Rinçage ■ Vapeur ■ Propre&Sec 60Min.
Niveau séchage ■ ■ ■ ■ ■ 21 Rinçage ■ Vapeur ■ Propre&Sec 60Min. ■ Anti-Allergie ■ Outdoor ■ Laine/Lavage à la main Délicats Minuterie Synthétiques Gain de temps2) Coton Eco Options Blanc/Couleurs Programme FRANÇAIS ■ ■ ■ ■ ■ 1) Cette option n'est pas disponible avec des températures de lavage inférieures à 40 °C. 2) Si vous sélectionnez la durée la plus courte, nous vous recommandons de réduire la charge de linge.
www.aeg.com 7.3 Séchage automatique Degré de séchage Type de textile Charge Très Sec Pour les articles en tissu éponge Coton et lin (peignoirs, serviettes de bain, etc.) jusqu'à 6 kg Prêt à Ranger1) Pour les articles à ranger directement Coton et lin (peignoirs, serviettes de bain, etc.
FRANÇAIS Degré de sécha- Type de textile ge Charge (kg) Prêt à Ranger Coton et lin Pour les articles à (peignoirs, serviettes de bain, etc.
www.aeg.com 9. RÉGLAGES 9.1 Sécurité enfants Avec cette option, vous pouvez empêcher les enfants de jouer avec le bandeau de commande. • Pour activer/désactiver cette option, appuyez simultanément sur les touches Options et Tache/Prélavage jusqu'à ce que le voyant s'allume/ s'éteigne sur l'affichage. Vous pouvez activer cette option : • Après avoir appuyé sur la touche Départ/Pause : toutes les touches et le sélecteur de programme sont désactivés (à l'exception de la touche Marche/Arrêt).
FRANÇAIS phases composant le programme et la durée du cycle s'affichent. 10.2 Chargement du linge 1. Ouvrez le hublot de l'appareil. 2. Dépliez-les le plus possible avant de les placer dans l'appareil. 3. Mettez le linge dans le tambour, un article à la fois. Assurez-vous de ne pas surcharger le tambour. 4. Fermez bien le hublot. 25 Compartiment réservé aux additifs liquides (assouplissant, amidon). Niveau maximal pour la quantité d'additifs liquides. Volet pour produit de lavage en poudre ou liquide.
www.aeg.com 4. Pour utiliser de la lessive liquide, tournez le volet vers le bas. Assurez-vous que le volet ne bloque pas la fermeture du tiroir. 10.5 Réglage d'un programme Avec le volet en position BASSE : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne versez pas de lessive liquide audelà du niveau maximal indiqué sur le volet. • Ne sélectionnez pas de phase de prélavage. • Ne sélectionnez pas la fonction Départ différé. 5. Dosez le produit de lavage et l'assouplissant. 6.
FRANÇAIS Le voyant correspondant cesse de clignoter et reste fixe. Sur l'affichage, le voyant de la phase en cours commence à clignoter et le voyant de la charge maximale s'éteint. Le programme démarre et le hublot est verrouillé. L'indicateur s'allume. La pompe de vidange peut momentanément se mettre en route lorsque l'appareil se remplit d'eau. 10.7 Départ d'un programme avec départ différé 1.
www.aeg.com Environ 20 minutes après le départ du programme, la durée du programme peut de nouveau être ajustée en fonction de la capacité d'absorption de l'eau par les tissus. La détection ProSense est uniquement effectuée pour les programmes de lavage complets (sans aucune phase supprimée). 10.9 Voyants de phase du programme Lorsque le programme démarre, le voyant de la phase en cours clignote et les autres voyants de phase sont fixes. Par ex., la phase de lavage ou de prélavage est en cours : .
FRANÇAIS signaux sonores retentissent (s'ils sont activés). Sur l'affichage, tous les voyants de la phase de lavage sont fixes et l'affichage du temps indique . Le voyant de la touche Départ/Pause s'éteint. Le hublot se déverrouille et le voyant s'éteint. clignote à la fin du programme en cas de tambour surchargé. 1. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil. Cinq minutes après la fin du programme, la fonction d'économie d'énergie éteint automatiquement l'appareil. 2. 3. 4. 5.
www.aeg.com 11.1 Programme NON-STOP Lavage et séchage Tous les programmes ne sont pas compatibles avec la fonction de séchage. Le programme Propre&Sec 60Min. est un programme de lavage et de séchage déjà complet. Vous pouvez laver et sécher votre linge en une fois en sélectionnant un « programme non-stop ». Procédez comme suit : 1. Appuyez sur la touche Marche/Arrêt pendant quelques secondes pour allumer l'appareil. 2. Chargez le linge dans le tambour, un article à la fois. 3.
FRANÇAIS 11.4 À la fin du programme de séchage 31 1. Sortez le linge de l'appareil. 2. Vérifiez que le tambour est vide. Après la phase de séchage, nettoyez le tambour, le joint et l'intérieur du hublot avec un chiffon humide. • L'appareil s'arrête automatiquement. • Les signaux sonores retentissent (s'ils sont activés). • Le symbole s'affiche. • Le voyant de la touche Départ/Pause s'éteint. Le voyant de verrouillage du hublot s'éteint.
www.aeg.com Pour obtenir de bons résultats de séchage tout en économisant de l'énergie et du temps, vous ne pouvez pas sélectionner une vitesse d'essorage trop basse pour les articles devant être lavés et séchés. 2. Appuyez sur la touche Départ/Pause pour lancer le programme. Sur l'affichage, l'indicateur Hublot verrouillé apparaît et l'indicateur de la phase en cours commence à clignoter. L'affichage indique la durée restante du programme. 12.3 Séchage chronométrique 1.
FRANÇAIS • Sélectionnez le programme de rinçage. • Appuyez simultanément sur Options et Gain de temps pour activer la fonction de nettoyage, jusqu'à ce que CLE s'affiche. • Appuyez sur la touche Départ/Pause pour lancer le programme. 33 Si vous utilisez fréquemment l'appareil, effectuez le programme CLE régulièrement. 14. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 14.
www.aeg.com • Afin de préserver l'environnement, n'utilisez que la quantité de produit de lavage recommandée. • Respectez les instructions figurant sur l'emballage des détergents ou autres produits utilisés, sans dépasser le niveau maximal indiqué ( ). • Utilisez les produits de lavage recommandés pour le type et la couleur du textile, pour la température du programme et pour le niveau de salissure. 14.4 Conseils écologiques • Réglez un programme sans prélavage pour laver du linge normalement sale.
FRANÇAIS AVERTISSEMENT! Pour éviter le froissage et le rétrécissement du linge, ne le séchez pas excessivement. 14.11 Conseils généraux Reportez-vous au tableau des « Programmes de séchage » pour connaître les durées de séchage moyennes. Avec l'expérience, vous saurez comment laver votre linge de façon optimale. 35 Notez les durées des cycles que vous avez déjà effectués. Pour éviter la formation d'électricité statique à la fin du cycle de séchage : 1.
www.aeg.com 15.5 Nettoyage du tambour Examinez régulièrement le tambour pour éviter le dépôt de particules de rouille. Pour un nettoyage complet : 1. Nettoyez le tambour à l'aide d'un produit spécial pour l'acier inoxydable. Respectez toujours les instructions figurant sur l'emballage du produit. 2. Lancez un programme court pour le coton à température élevée, tambour vide, avec une petite quantité de lessive en poudre afin de rincer tous les résidus restants. 3.
FRANÇAIS 37 Vérifiez régulièrement le filtre de la pompe de vidange pour vérifier sa propreté. Nettoyez la pompe de vidange dans le cas où : • L'appareil ne vidange pas. • Le tambour ne tourne pas. • L'appareil fait un bruit inhabituel, car la pompe de vidange est obstruée. • L'écran affiche le code d’alarme . 1 1 2 4. Laissez l'eau s'écouler. AVERTISSEMENT! • Ne retirez pas le filtre pendant que l'appareil fonctionne. • Ne nettoyez pas la pompe de vidange si l'eau contenue dans l'appareil est chaude.
www.aeg.com 2 2 1 1 8. Si nécessaire, retirez les peluches et les débris de la cavité du filtre. 9. Assurez-vous que la turbine de la pompe tourne librement. Si ce n'est pas le cas, contactez votre service après-vente agréé. 12. Fermez l'accès de la pompe. 2 1 10. Nettoyez le filtre sous l'eau courante. Lorsque vous appliquez la procédure de vidange d'urgence, vous devez réactiver le système de vidange : a. Versez 2 litres d'eau dans le distributeur de produit de lavage pour le lavage principal.
FRANÇAIS 39 1 2 45° 3 20° 2. Retirez le tuyau d'arrivée de l'appareil en desserrant la bague de serrage. 15.9 Vidange d'urgence Si l'appareil ne peut pas vidanger l'eau, effectuez la même procédure décrite dans le paragraphe « Nettoyage du filtre de vidange ». Si nécessaire, nettoyez la pompe. Lorsque vous vidangez l'eau avec la vidange d'urgence, vous devez réactiver le système de vidange : 3. Utilisez une brosse à dents pour nettoyer le filtre de la valve situé à l'arrière de l'appareil. 1.
www.aeg.com AVERTISSEMENT! Assurez-vous que la température est supérieure à 0 °C avant d'utiliser à nouveau l'appareil. Le fabricant ne pourra être tenu pour responsable en cas de dommages dus aux basses températures. 16. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 16.1 Introduction L'appareil ne démarre pas ou s'arrête en cours de programme. Dans un premier temps, essayez de trouver une solution au problème (reportez-vous au tableau).
FRANÇAIS 41 16.2 Pannes possibles Problème Le programme ne démarre pas. Solution possible • Assurez-vous que la fiche du câble d'alimentation est bien insérée dans la prise de courant. • Vérifiez que le hublot de l'appareil est fermé. • Assurez-vous qu'aucun fusible n'est grillé dans la boîte à fusibles. • Vérifiez que vous avez bien appuyé sur la touche Départ/ Pause. • Si vous avez sélectionné un départ différé, annulez-le ou attendez la fin du décompte.
www.aeg.com Problème Solution possible Il y a de l'eau sur le sol. • Assurez-vous que les raccords des tuyaux d'eau sont bien serrés et qu'il n'y a aucune fuite d'eau. • Assurez-vous que le tuyau d'arrivée d'eau et le tuyau de vidange ne sont pas endommagés. • Assurez-vous d'utiliser une lessive adaptée en quantité correcte. • Vérifiez si vous avez sélectionné un programme de lavage se terminant avec de l'eau dans la cuve. • Assurez-vous que le programme de lavage est terminé.
FRANÇAIS Problème L'appareil ne sèche pas ou le séchage n'est pas satisfaisant. Le linge est couvert de peluches de différentes couleurs. 43 Solution possible • • • • Ouvrez le robinet d'arrivée d'eau. Assurez-vous que le filtre de vidange n'est pas obstrué. Réduisez la charge de linge. Assurez-vous que vous avez réglé un cycle adapté. Si nécessaire, sélectionnez de nouveau une courte durée de séchage.
www.aeg.com 5. Sortez le linge et refermez le hublot. 6. Fermez le volet du filtre. 17. VALEURS DE CONSOMMATION Les valeurs indiquées sont obtenues après des essais en laboratoire, avec les normes correspondantes. Les données peuvent différer pour différentes raisons : la quantité et le type de linge, ou la température ambiante. La pression de l'eau, la tension de l'alimentation et la température de l'arrivée d'eau peuvent également affecter la durée du programme de lavage.
FRANÇAIS Programmes Charge Consom- Consomma(kg) mation tion d'eau énergéti- (litres) que (kWh) Laine/Lavage à la main 30 °C 1.5 0.35 45 Durée approximative du programme (minutes) 57 60 1) Le « programme coton éco » à 60 °C avec une charge de 9 kg est le programme de référence pour les données de l'étiquette énergétique, conformément aux normes CEE 92/75 18.
www.aeg.com 19.3 Kit de superposition AVERTISSEMENT! N'installez pas le sèche-linge sous le lave-linge. 19.4 Socle à tiroir Le sèche-linge ne peut-être superposé au-dessus du lave-linge qu'en utilisant le kit de superposition adapté, fabriqué et agréé par AEG. Pour surélever votre appareil et faciliter le chargement et le déchargement du linge. Assurez-vous de la compatibilité du kit de superposition en vérifiant la profondeur de vos appareils.
FRANÇAIS 47
157007490-B-212017 www.aeg.