EN User Manual Washing Machine L 83480 SFL
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 5 4. CONTROL PANEL...........................................................................................................6 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. 2.
ENGLISH 2.4 Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Make sure that you remove all metal objects from the laundry. • Do not put a container to collect possible water leakage under the appliance.
www.aeg.com 4. CONTROL PANEL 4.1 Control panel description 1 2 3 10 9 8 7 6 5 4 7 Extra Aclarado/Enxag. button 1 On/Off button 2 Programme knob 3 Display 8 Manchas-Nódoas/Prelava. button 9 Centrif. button 4 Inicio/Pausa button 10 Temp. button 5 Inicio Diferido button 6 Extra Rapído button 4.
ENGLISH Temperature of the set programme A Cold water Spin speed of the set programme B No Spin symbol1) Rinse hold symbol 1) Only available for SPIN/DRAIN programme. The phase symbols When a programme is set, all the symbols of the phases related to the programme come on. When the programme starts, only the symbol of the phase in operation flashes. When the programme is completed, the symbol of the last phase is on.
www.aeg.com Programme time When the programme starts, the programme time decreases with steps of 1 minute. Delay start When you press the delay start button, the display shows the delay start time Alarm codes If the appliance has a malfunction, the display shows alarm codes. Refer to «Troubleshooting». H The display shows this message for some seconds when: • you cannot set a function with the washing programme • you try to change the washing programme while it operates.
ENGLISH 9 the Stain symbol comes on when you activate the function. The Prewash symbol comes on when this function is activated. L The indicator bar is not fully filled when you set only one of the functions. The indicator bar is fully filled when you set the two functions. 5. PROGRAMMES 5.1 Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 8 kg 1400 rpm White cotton and coloured cotton. Normal soil and light soil.
www.aeg.com Programme Temperature range Anti-Alergia 60°C Centrif./Descarga3) Aclarado/Enxaguar 4) Maximum load Maximum spin speed Programme description (Type of load and soil level) 8 kg 1400 rpm White cotton items. This programme removes micro-organisms thanks to the washing by 60°C and adds one rinse. In this way the wash is more effective. 8 kg 1400 rpm To spin the laundry and to drain the water in the drum. All fabrics. 8 kg 1400 rpm To rinse and spin the laundry.
ENGLISH Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 1.5 kg Steam programme for synthetic items. This cycle helps to dewrinkle the laundry. Anti-arrugas / Antirugas 40°C 11 1) To reduce the creases of the laundry, this cycle regulates the water temperature and performs a soft wash and spin phase. The appliance adds some rinses. 2) During this cycle the drum rotates slowly to ensure a gentle washing.
www.aeg.com Extra Rapído 3) Inicio Diferido Extra Silencio Extra Aclarado/Enxag. 2) Programme Manchas-Nódoas/Prelava. 1) 12 ■ ■ ■ ■ ■ ■ Sintéticos ■ ■ ■ ■ Fácil ■ ■ ■4) ■ Delicados ■ ■ ■ ■ Lana/Lãs ■ ■ Edredón ■ Anti-Alergia ■ Centrif./Descarga5) ■ Aclarado/Enxaguar ■ ■ Jeans ■ ■ 20 Min.-3 Kg ■ Super Eco ■ ■ ■ ■ Algod. Eco ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 4) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 6) ■ 1) If you use liquid detergent, set a programme without Prewash.
ENGLISH 5.2 Woolmark Apparel Care Blue Company for the washing of wool garments labelled as «hand wash» provided that the garments are washed according to the instructions issued by the manufacturer of this washing machine. Follow the garment care label for drying and other laundry instructions. M1380 In UK, Eire, Hong Kong and India the Woolmark symbol is a certification trademark. The wool wash cycle of this machine has been approved by The Woolmark 6.
www.aeg.com Programmes Load (kg) Energy con- Water consumption sumption (kWh) (litre) ApproxiRemaining mate promoisture gramme du- (%)1) ration (minutes) Standard 60 °C cotton 8 1.02 55 242 52 Standard 60 °C cotton 4 0.78 45 211 52 Standard 40 °C cotton 4 0.59 45 191 52 1) At the end of spin phase. 2) Not available for some models.
ENGLISH This option is not available with a temperature lower than 40° C. • Prelava.: Use this option to add a prewash phase before the washing phase. We recommend that you use this option when you have laundry with a high level of soil. The set of this option increases the programme duration. 7.6 Centrif. Press this button to: • Decrease the maximum speed of the spin phase of the programme. 15 The display shows only the spin speeds available with the set programme. • Deactivate the spin phase.
www.aeg.com 10. DAILY USE WARNING! Refer to Safety chapters. 10.1 Activating the appliance 1. Connect the mains plug to the mains socket. 2. Open the water tap. 3. Press button On/Off to activate the appliance. A short tune sounds. 10.2 Loading the laundry 1. Open the appliance door 2. Put the laundry in the drum, one item at a time. 3. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. 4. Close the door firmly.
ENGLISH A 4. To use liquid detergent, turn the flap down. B 17 The indicator of button Inicio/Pausa flashes with red colour. The display shows the default temperature, the spin speed and the empty indicator bars of the available functions. 2. To change the temperature and/or the spin speed, press the related buttons. 3. Set the available functions. 10.6 Starting a programme without the delay start Press button Inicio/Pausa to start the programme. The relevant indicator stops to flash and stays on.
www.aeg.com The related indicator flashes. 2. Press button Inicio Diferido repeatedly until the display shows . 3. Press button Inicio/Pausa again to start the programme immediately. 10.9 Behaviour of the appliance After approximately 15 minutes from the start of the programme: • The appliance adjusts automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. • The display shows the new time value. 10.
ENGLISH When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle. 2. Remove the laundry from the appliance. 3. Make sure that the drum is empty. 4. Keep the door ajar, to prevent mildew and odours 10.15 Draining water out after end of cycle The washing programme is completed, but there is water in the drum: The drum turns regularly to prevent the creases in the laundry. The door lock indicator door stays locked. is on.
www.aeg.com the tub and start the spin phase again. 11.2 Stubborn stains For some stains, water and detergent is not sufficient. We recommend that you pre-treat these stains before you put the items in the appliance. Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric. 11.
ENGLISH Regularly examine the seal and remove all objects from the inner part. Always obey the instructions that you find on the packaging of the product. 12.5 Cleaning the drum 12.3 Maintenance wash Regularly examine the drum to prevent limescale and rust particles. Only use special products to remove rust particles from the drum. With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a maintenance wash.
www.aeg.com 12.7 Cleaning the drain filter Do not clean the drain filter if the water in the appliance is hot. 1. 2. 1 1 2 3. 4. 2 1 5. 6.
ENGLISH 7. 8. 1 2 9. 12.8 Cleaning the inlet hose and the valve filter 1. 2.
www.aeg.com 3. 4. 45° 20° 12.9 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1. When you drain the water with the emergency drain procedure, you must activate again the drain system: Put 2 litres of water in the main wash compartment of the detergent dispenser. 2.
ENGLISH • - No communication between electronic elements of the appliance. Switch off and switch on again. • - The anti-flood device is on. Disconnect the appliance and close the water tap. Contact the Authorised Service Centre. 25 WARNING! Deactivate the appliance before you do the checks. 13.2 Possible failures Problem Possible solution The programme does not start. Make sure that the mains plug is connected to the mains socket. Make sure that the appliance door is closed.
www.aeg.com Problem Possible solution Set the drain programme if you set an option which ends with water in the tub. The spin phase does not operate or the washing cycle lasts longer than usually. Set the spin programme. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. There is water on the floor.
ENGLISH 27 After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. 14.
132903692-A-302015 www.aeg.