Operation Manual

1. Pull out the dispenser drawer until it
stops. Measure out the amount of deter-
gent required, pour it into the main wash
compartment
and, if you wish to carry
out the prewash phase, pour the deter-
gent into the compartment marked
.
If you wish to perform the stain function,
pour the stain remover into the compart-
ment
marked with an arrow.
2. If required, pour fabric softener into the
compartment marked
(the amount
used must not exceed the MAX mark in
the drawer).
Close the drawer gently.
Select the temperature (button 2)
Press this button repeatedly to increase or decrease the temperature, if you want your
laundry to be washed at a temperature different from the one proposed by the appliance.
The maximum temperatures for each washing programme can be checked in the paragraph
«Washing programmes».
The symbol of cold wash corresponds to
.
Select the spin speed, Night Cycle or Rinse Hold option (button 3)
When the required programme has been selected, your appliance automatically proposes
the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you want your laundry to be spun
at a speed different from the one proposed by the appliance.
RINSE HOLD: by selecting this option the water of the last rinse is not emptied out to prevent
the fabrics from creasing.
NIGHT CYCLE: by selecting this option, the machine will not drain the water of the last
rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed, this washing
Daily use
13