User guide

2.
Put a small quantity of detergent in
the main wash compartment of the
detergent dispenser. Set and start a
programme for cotton at the highest
temperature without laundry. This
removes all possible dirt from the
drum and the tub.
9. USING THE APPLIANCE
1.
Open the water tap.
2.
Connect the mains plug to the mains
socket.
3.
Press button
1
to activate the ap-
pliance.
4.
Put the laundry in the appliance.
5.
Use the correct quantity of deter-
gent and additives.
6.
Set and start the correct programme
for the type of laundry and soil.
9.1 Loading the laundry
1.
Open the appliance door.
2.
Put the laundry in the drum, one
item at a time. Shake the items be-
fore you put them in the appliance.
Make sure not to put too much laun-
dry in the drum.
3.
Close the door.
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
9.2 Filling the detergent and additives
The detergent compartment for the prewash phase and the
soak programme.
Add the detergent for prewash and soak before the start of the
programme.
16
www.aeg.com