FR Notice d'utilisation Lave-linge L86360TL4
www.aeg.com TABLE DES MATIÈRES 1. CONSIGNES DE SÉCURITÉ........................................................................................... 3 2. INSTRUCTIONS DE SÉCURITÉ...................................................................................... 4 3. DESCRIPTION DE L'APPAREIL...................................................................................... 5 4. BANDEAU DE COMMANDE......................................................................................... 6 5.
FRANÇAIS 1. 3 CONSIGNES DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.
www.aeg.com • • • • neufs fournis avec l'appareil, il convient de ne pas réutiliser des ensembles de raccordement usagés. Si le câble d'alimentation est endommagé, il doit être remplacé par le fabricant, son service après-vente ou des personnes de qualification similaire afin d'éviter un danger. Avant toute opération d'entretien, éteignez l'appareil et débranchez la fiche de la prise secteur. Ne pulvérisez pas d'eau ni de vapeur pour nettoyer l'appareil.
FRANÇAIS une fiche secteur de 13 ampères. Si vous devez changer le fusible de la fiche secteur, utilisez un fusible 13 A approuvé ASTA (BS 1362). • Cet appareil est conforme aux directives CEE. 2.3 Raccordement à l'arrivée d'eau • Veillez à ne pas endommager les tuyaux de circulation d'eau. • Avant de brancher l'appareil à des tuyaux neufs ou n'ayant pas servi depuis longtemps, laissez couler l'eau jusqu'à ce qu'elle soit propre.
www.aeg.com 4. BANDEAU DE COMMANDE 4.1 Description du bandeau de commande 1 2 3 11 1 2 3 4 5 6 7 8 9 10 11 Touche Marche/Arrêt (Auto Off) Sélecteur de programme Affichage Touche Lessive liquide (Lessive Liquide) Touche Départ/Pause (Départ/Pause) Touche Départ différé (Départ Différé) Touche Gain de temps (Gain de Temps) Touche Rinçage plus (Rinçage Plus) Touche Taches/Prélavage (Taches/ Prélav.) Touche de réduction de la vitesse d'essorage (Essorage) Touche de température (Temp.
FRANÇAIS 7 4.2 Affichage A B C D L E F K G J H I L'écran affiche : Température du programme sélectionné A Eau froide Vitesse d'essorage du programme sélectionné B Symbole Sans essorage1) Symbole Arrêt cuve pleine 1) Uniquement disponible pour le programme ESSORAGE/VIDANGE. Symboles des phases Lorsqu'un programme est sélectionné, tous les symboles des phases de ce programme s'allument. Lorsque le programme démarre, seul le symbole de la phase en cours clignote.
www.aeg.com Vous ne pouvez pas ouvrir le couvercle de l'appareil lorsque ce symbole est allumé. Vous ne pouvez ouvrir le couvercle de l'appareil que lorsque ce symbole est éteint. F Si le programme est terminé mais que le symbole reste allumé : • La fonction « Arrêt cuve pleine » est activée. • Il y a de l'eau dans le tambour. Le symbole Départ différé s'allume lorsque vous sélectionnez la fonction de départ différé.
FRANÇAIS Le symbole Gain de temps s'allume lorsque vous sélectionnez l'une des durées du programme. J Durée réduite Rapide Le symbole Rinçage plus s'allume lorsque cette fonction est activée. K La valeur affichée indique le nombre total de rinçages. La barre est complète lorsque vous sélectionnez le nombre maximal de rinçages. Le symbole Taches s'allume lorsque vous activez cette fonction. Le symbole Prélavage s'allume lorsque cette fonction est activée.
www.aeg.com Programme Plage de températures Charge max- Description des programmes imale (Type de charge et degré de salissure) Vitesse d'essorage maximale Délicats 40 °C - Froid 2.5 kg 1200 tr/min Vêtements en textiles délicats tels que l'acrylique, la viscose ou le polyester. Normalement sale.
FRANÇAIS Programme Plage de températures 11 Charge max- Description des programmes imale (Type de charge et degré de salissure) Vitesse d'essorage maximale Programmes vapeur7) La vapeur peut être utilisée sur du linge sec, lavé ou porté une seule fois. Ces programmes permettent de réduire le froissement et les odeurs et rendent le linge plus doux. N'utilisez aucun produit de lavage.
www.aeg.com Programme Plage de températures Charge max- Description des programmes imale (Type de charge et degré de salissure) Vitesse d'essorage maximale Défroissage Vapeur 40 °C 1 kg Programme de vapeur pour les articles synthétiques. Ce cycle contribue à défroisser le linge. 1) Pour réduire les plis sur le linge, ce cycle ajuste la température de l'eau et effectue un lavage et une phase d'essorage en douceur. L'appareil effectue des rinçages supplémentaires.
FRANÇAIS Programme Taches/ Rinçage Gain de Prélav. 1) Plus 2) Temps 3) Laine/Soie ■ Couette ■ Anti-allergies ■ Essorage/Vidange5) ■ Rinçage ■ ■ Jeans ■ ■ 20 min.-3Kg ■ Super Eco ■ ■ ■ ■ Coton Eco ■ ■ ■ ■ ■ 13 Départ Différé Lessive Liquide ■ ■ ■ ■ ■ ■ ■ ■ 4) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 6) 1) Si vous utilisez un produit de lavage liquide, sélectionnez un programme sans Prélavage.
www.aeg.com 6. VALEURS DE CONSOMMATION Les données de ce tableau sont approximatives. Les données peuvent différer pour différentes raisons : la quantité et le type de linge, la température ambiante ou de l'eau. Au démarrage du programme, l'affichage indique la durée du programme pour la charge maximale. Durant la phase de lavage, la durée du programme est calculée automatiquement.
FRANÇAIS Mode « Éteint » (W) 15 Mode « Veille » (W) Les informations fournies dans le tableau ci-dessus sont conformes à la directive d'application 1015/2010 de la réglementation 2009/125/EC de la commission européenne. 7. OPTIONS 7.1 Temp. Appuyez sur cette touche pour modifier la température par défaut. Lorsque et s'affichent, l'appareil ne chauffe pas l'eau. 7.2 Essorage Appuyez sur cette touche pour : • Réduire la vitesse maximale de la phase d'essorage du programme.
www.aeg.com 7.7 Départ/Pause 7.8 Lessive Liquide Appuyez sur la touche Départ/Pause pour lancer ou interrompre un programme. Appuyez sur cette touche pour adapter le cycle si vous utilisez de la lessive liquide. Le voyant correspondant s'allume. 8. RÉGLAGES 8.1 Signaux sonores Les signaux sonores retentissent lorsque : • • • • • Vous allumez l'appareil. Vous éteignez l'appareil. Vous appuyez sur les touches. Le programme est terminé. L'appareil présente une anomalie de fonctionnement.
FRANÇAIS 10.2 Chargement du linge 1. Ouvrez le couvercle de l'appareil. 2. Appuyez sur la touche A. Le tambour s'ouvre automatiquement. 3. Mettez le linge dans le tambour, un article à la fois. 4. Dépliez-les le plus possible avant de les placer dans l'appareil. Assurez-vous de ne pas surcharger le tambour. 5. Refermez le tambour et le couvercle. 17 10.3 Utilisation de lessive et d'additifs Dosez le produit de lavage et l'assouplissant.
www.aeg.com 10.5 Lessive liquide ou en poudre CLICK A 2. 1. CLICK 3. 4. • Position A pour la lessive en poudre (réglage d'usine). • Position B pour la lessive liquide. B Si vous utilisez une lessive liquide : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne dépassez pas le niveau maximal. 10.6 Réglage d'un programme 1. Tournez le sélecteur de programmes. Le voyant correspondant au programme s'allume. Le voyant de la touche Départ/Pause clignote en rouge.
FRANÇAIS 10.8 Comportement de l'appareil Au bout d'environ 15 minutes après le départ du programme : • L'appareil ajuste automatiquement la durée du cycle au type de linge chargé dans le tambour pour un lavage parfait en un minimum de temps. • La nouvelle durée s'affiche. 10.9 Départ d'un programme avec départ différé 1. Appuyez plusieurs fois sur la touche Départ Différé jusqu'à ce que le délai du départ différé (en minutes ou en heures) s'affiche. Le voyant correspondant s'allume. 2.
www.aeg.com Pour ouvrir le couvercle, procédez comme suit : 1. Appuyez sur la touche Auto Off pendant quelques secondes pour éteindre l'appareil. 2. Attendez quelques minutes puis ouvrez doucement le couvercle. 3. Fermez la porte de l'appareil. 4. Allumez l'appareil et sélectionnez à nouveau le programme. Sur l'affichage, 1. Appuyez sur la touche Départ/Pause. Attendez que le voyant couvercle s'éteigne. verrouillé 2. Ouvrez la porte de l'appareil. 3.
FRANÇAIS 10.18 Option « ARRÊT AUTOMATIQUE » L'option ARRÊT AUTOMATIQUE éteint automatiquement l'appareil pour réduire la consommation d'énergie lorsque : • Vous n'utilisez pas l'appareil pendant 5 minutes avant d'appuyer sur la touche Départ/Pause. Appuyez sur la touche Auto Off pour mettre à nouveau l'appareil en marche. 21 • Au bout de 5 minutes après la fin du programme de lavage Appuyez sur la touche Auto Off pour mettre à nouveau l'appareil en marche.
www.aeg.com • Afin de préserver l'environnement, n'utilisez que la quantité nécessaire de produit de lavage. • Respectez les instructions qui se trouvent sur les emballages de ces produits. • Utilisez des produits adaptés au type et à la couleur du textile, à la température du programme et au niveau de salissure.
FRANÇAIS 12.5 Nettoyage du distributeur de produit de lavage 1. 2. 3. 12.6 Nettoyage du filtre de vidange AVERTISSEMENT! Ne nettoyez pas le filtre de vidange si l'eau dans l'appareil est chaude. 1. 2.
www.aeg.com 3. 4. 5. 12.7 Nettoyage du tuyau d'arrivée d'eau et du filtre de la vanne 1. 2.
FRANÇAIS 3. 25 4. 90˚ 12.8 Vidange d'urgence En raison d'une anomalie de fonctionnement, l'appareil ne peut pas vidanger l'eau. Si cela se produit, procédez aux étapes (1) à (5) du chapitre « Nettoyage du filtre de vidange ». Si nécessaire, nettoyez la pompe. AVERTISSEMENT! Assurez-vous que la température est supérieure à 0 °C avant d'utiliser à nouveau l'appareil. Le fabricant ne pourra être tenu pour responsable en cas de dommages dus aux basses températures. 12.
www.aeg.com • • • • - L'appareil ne se remplit pas d'eau correctement. - L'appareil ne se vidange pas. - Le couvercle de l'appareil ou les portes du hublot sont ouverts ou sont mal fermés. Veuillez tout vérifier ! - L'alimentation électrique est instable. Attendez que l'alimentation électrique se stabilise. • - Le système de sécurité antidébordement s'est déclenché. Débranchez l'appareil et fermez le robinet d'arrivée d'eau. Contactez le service après-vente agréé.
FRANÇAIS Problème 27 Solution possible Assurez-vous que le tuyau de vidange n'est pas tordu ni plié. Assurez-vous que le filtre de vidange n'est pas obstrué. Nettoyez le filtre si nécessaire. Reportez-vous au chapitre « Entretien et nettoyage ». Vérifiez que le raccordement du tuyau de vidange est correct. Sélectionnez le programme de vidange si vous avez choisi un programme sans phase de vidange. Sélectionnez le programme de vidange si vous avez choisi une option se terminant avec de l'eau dans la cuve.
www.aeg.com Problème Solution possible Les résultats de lavage ne sont pas satisfaisants. Augmentez la quantité de produit de lavage ou utilisez-en un autre. Utilisez des produits spéciaux pour enlever les taches tenaces avant de laver le linge. Veillez à sélectionner la bonne température. Réduisez la charge de linge. Impossible de régler une Assurez-vous d'avoir appuyé uniquement sur la/les bonne(s) option. touche(s). Après avoir effectué ces contrôles, mettez l'appareil en fonctionnement.
FRANÇAIS 29 15. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le électroniques. Ne jetez pas les appareils symbole . Déposez les emballages dans les conteneurs prévus à cet effet. Contribuez à la protection de l'environnement et à votre sécurité, recyclez vos produits électriques et portant le symbole avec les ordures ménagères. Emmenez un tel produit dans votre centre local de recyclage ou contactez vos services municipaux.
www.aeg.
FRANÇAIS 31
108766102-A-312014 www.aeg.