L 86360 TL 4 ES Manual de instrucciones
www.aeg.com ÍNDICE DE MATERIAS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. INSTRUCCIONES DE SEGURIDAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 DESCRIPCIÓN DEL PRODUCTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PANEL DE MANDOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMAS DE LAVADO . . . . . . . . . . . . . . . . . . . . . . .
ESPAÑOL 1. 3 INSTRUCCIONES DE SEGURIDAD Antes de instalar y usar el aparato, lea atentamente este manual: • Por su seguridad y la de su hogar • Para respetar el medio ambiente • Por el correcto funcionamiento del aparato. Guarde siempre estas instrucciones junto con el aparato, aunque se mude o lo dé a otra persona. El fabricante no se hace responsable de los daños causados por una instalación incorrecta.
www.aeg.com Conexión de agua • No conecte el aparato con tubos antiguos ya usados. Utilice únicamente tubos nuevos. • Asegúrese de no provocar daños en los tubos de agua. • No conecte el aparato a tuberías nuevas o que no se hayan utilizado durante un periodo de tiempo largo. Deje correr el agua durante unos minutos y, a continuación, conecte la manguera de entrada. • La primera vez que use el aparato, asegúrese de que las mangueras y los acoplamientos no tengan fugas.
ESPAÑOL 3 Botón de la tapa 9 Válvula de entrada de agua 4 Puerta de acceso al filtro 5 Palanca para mover el aparato 10 Tubo de desagüe 6 Patas ajustables 12 Pata para nivelación del aparato 11 Pasadores de transporte 7 Placa de características 2.1 Accesorios 8 Cable de alimentación 1 2 5 1 Tapón de plástico 3 Para cerrar el orificio de la parte posterior del armario, después de extraer los pasadores de transporte.
www.aeg.com – Pulse la tecla 1 para encender el aparato de nuevo. – Ajuste de nuevo el programa de lavado y todas las posibles opciones. • Transcurridos 5 minutos desde el final del programa de lavado. Consulte "Al finalizar el programa". 3.2 Selector de programas 2 Gire este botón para ajustar un programa. Se ilumina el indicador de programa correspondiente. 3.
ESPAÑOL 7 D El símbolo del vapor se enciende cuando se selecciona un programa de Vapor. E El exceso de dosificación de detergente se enciende al final del ciclo cuando el aparato detecta que hay demasiado detergente. No se puede abrir la puerta del aparato cuando el símbolo está encendido. Puede abrir la puerta únicamente cuando el símbolo se apague. F Si el programa termina pero el símbolo sigue encendido: • La función "Agua en la cuba" está encendida. • Hay agua en el tambor.
www.aeg.com • Corta duración • Extra rápido El símbolo de aclarado extra se enciende cuando esta función está activada. K El valor muestra el número total de aclarados. La barra indicadora está llena por completo cuando se ajusta el número máximo de aclarados. El símbolo de Manchas se enciende cuando se activa esta función. L El símbolo de Prelavado se enciende cuando se activa esta función. La barra indicadora no está completamente llena cuando se ajusta únicamente una de las funciones.
ESPAÑOL Se recomienda utilizar esta función cuando la colada está muy sucia. El ajuste de esta función aumenta la duración del programa. 3.10 Botón de centrifugado 10 Pulse esta tecla para: • Reducir la velocidad de la fase de centrifugado máxima del programa. La pantalla muestra únicamente las velocidades de centrifugado disponibles para el programa seleccionado. • Desactivar la fase de centrifugado. • Active la función "Agua en la cuba". Ajuste esta función para evitar arrugas en los tejidos.
www.aeg.com 4. PROGRAMAS DE LAVADO Programa Temperatura Tipo de carga Peso máx. de la carga Descripción de ciclo Funciones Algodón 95° - Frío Algodón blanco y de color con suciedad intensa. Carga máxima 6 kg Lavado Aclarado Centrifugado largo REDUCCIÓN DEL CENTRIFUGADO AGUA EN LA CUBA PRELAVADOMANCHAS/1) ACLARADO EXTRA AHORRA TIEMPO2) DETERGENTE LÍQUIDO Extra Silencio 95° - Frío Algodón blanco y de color con suciedad normal.
ESPAÑOL 11 Programa Temperatura Tipo de carga Peso máx. de la carga Descripción de ciclo Funciones Delicados 40° - Frío Tejidos delicados como acrílicos, viscosa o poliéster con suciedad normal. Carga máxima 3 kg Lavado Aclarados Centrifugado corto REDUCCIÓN DEL CENTRIFUGADO AGUA EN LA CUBA PRELAVADOMANCHAS/1) ACLARADO EXTRA AHORRA TIEMPO DETERGENTE LÍQUIDO Lana/Seda Lana lavable a máquina, así como lanas de lavado a mano y tejidos delicados con el símbolo “lavar a mano”.
www.aeg.com Programa Temperatura Tipo de carga Peso máx. de la carga Descripción de ciclo Funciones Aclarado Todos los tejidos. Carga máxima 6 kg Un aclarado con fase de centrifugado adicional REDUCCIÓN DEL CENTRIFUGADO AGUA EN LA CUBA ACLARADO EXTRA4) DETERGENTE LÍQUIDO Tejidos Gruesos 60° - Frío Prendas como los pantalones, las camisas o las chaquetas de tela vaquera y jerséis de materiales de alta tecnología.
ESPAÑOL 13 3) Para seleccionar solo el programa DESCARGA, ajuste la función en SIN CENTRIFUGADO. 4) Pulse el botón ACLARADO EXTRA para añadir aclarados. Con una velocidad de centrifugado baja, el aparato realiza aclarados delicados y un breve centrifugado. 5) Este programa es adecuado para detergentes que son eficaces a bajas temperaturas.
www.aeg.com 5. VALORES DE CONSUMO Los datos de esta tabla son aproximados. Los datos pueden cambiar por varios motivos: la cantidad y tipo de colada, el agua y la temperatura ambiente. Programas Carga (kg) Consumo energético (KWh) Consumo de agua (litros) Duración aproximada del programa (minutos) Humedad restante (%)1) Algodón 60 °C 6 1.10 54 180 52 Algodón 40 °C 6 0.60 52 170 52 Sintéticos 40 °C 3 0.45 45 105 35 Delicados 40 °C 3 0.
ESPAÑOL 15 7. UTILIZACIÓN DEL APARATO 1. 2. Abra el grifo. Conecte el enchufe a la toma de red. 3. Pulse el botón 1 para encender el aparato. 4. Introduzca la colada en el aparato. 5. Utilice la cantidad correcta de detergente y aditivos. 6. Ajuste e inicie el programa correcto para el tipo de colada y suciedad. 7.1 Carga de la colada Abra la tapa del aparato. Pulse el botón A (en función del modelo). El tambor se abre automáticamente. 3. Introduzca las prendas.
www.aeg.com Detergente líquido o en polvo 1. 2. CLICK A 3. 4. CLICK B • Posición A para detergente en polvo (ajuste de fábrica). • Posición B para detergente líquido. Cuando use detergente líquido: – No utilice detergentes líquidos gelatinosos ni gruesos. – No cargue más líquido del nivel máximo. 7.3 Ajuste e inicio de un programa 1. 6. Gire el selector de programas. Se ilumina el indicador de programa correspondiente.
ESPAÑOL 7.5 Cancelación de un programa 1. Pulse el botón 1 para cancelar el programa y apagar el aparato. 2. Pulse el botón 1 de nuevo para encender el aparato. Ahora puede ajustar un nuevo programa de lavado. El aparato no desagua. 7.9 Abra la tapa Mientras un programa o el inicio diferido están en marcha, la tapa está bloqueada. Para abrir la tapa: 1. Pulse la tecla 5 . Puede abrir la tapa 2 minutos después de que se detenga el aparato. El símbolo del candado de la puerta se apaga. 2. Abra la tapa.
www.aeg.com • Retire la colada del aparato. Asegúrese de que el tambor está totalmente vacío. • Deje la puerta entreabierta para evitar la formación de moho y olores desagradables. • Cierre la toma de agua. El programa de lavado ha terminado, pero la función de "Agua en la cuba" está encendida: – El tambor gira regularmente para evitar arrugas en las prendas. – La puerta permanece bloqueada. – Debe drenar el agua para abrir la puerta. Para descargar el agua: 1.
ESPAÑOL • Use los productos adecuados para el tipo y color del tejido, la temperatura del programa y el grado de suciedad. 8.4 Consejos ecológicos Para contribuir con el medio ambiente, use menos agua y energía y siga estas instrucciones: • Ajuste un programa sin la fase de prelavado para lavar ropa con suciedad normal. • Empiece siempre un programa de lavado con la carga de colada máxima. • Si fuera necesario, utilice un quitamanchas cuando ajuste un programa a baja temperatura.
www.aeg.com 9.3 Lavado de mantenimiento Con los programas a baja temperatura, es posible que quede algo de detergente en el tambor. Realice periódicamente un lavado de mantenimiento. Para ello: • Saque las prendas del tambor. • Seleccione el programa de lavado de algodón de mayor temperatura • Use la cantidad correcta de detergente en polvo con propiedades biológicas. Después de cada lavado, mantenga la puerta abierta unos instantes para eliminar la humedad y los olores desagradables. 9.
ESPAÑOL 2. 3. 4. 5. 6. 7. 8. 21 Coloque un recipiente debajo del hueco del filtro para recoger el agua que salga. Gire el filtro hasta que esté en posición vertical. Gire el filtro completamente y extráigalo. Retire la pelusa y los objetos. Limpie el filtro con agua. Vuelva a colocarlo y atorníllelo. Asegúrese de que lo aprieta correctamente para evitar fugas. Cierre la puerta del filtro. 9.6 El filtro del tubo de entrada y el filtro de la válvula ADVERTENCIA • Desenchufe el aparato de la toma de red.
www.aeg.com 6. 7. Vuelva a colocar el tubo de entrada. Cerciórese de que las conexiones están bien apretadas para evitar fugas. Abra el grifo. 90˚ 9.7 Desagüe de emergencia Debido a una avería, el aparato no puede desaguar. Si esto ocurre, realice los pasos 1) a 3) del apartado "Para limpiar el filtro de desagüe". Limpie el filtro si fuera necesario. Vuelva a colocar el conducto de desagüe y cierre la compuerta del filtro. 2.
ESPAÑOL Problema Causa posible 23 Posible solución La manguera de entrada Compruebe que la manguera de agua está dañada. de entrada de agua no está dañada. El aparato no desagua. Los filtros de la manguera de entrada de agua está obstruido. Limpie los filtros. Consulte el capítulo "Mantenimiento y limpieza". El grifo está obstruido o tiene incrustaciones calcáreas. Limpie el grifo. La conexión de la manguera de entrada de agua no es correcta. Compruebe que la conexión es correcta.
www.aeg.com Problema Causa posible El programa no se El aparato no está bien pone en marcha. enchufado a la toma de corriente. Posible solución Conecte el cable a la toma de corriente. Se ha fundido un fusible. Cambie el fusible. No ha pulsado la tecla 5 . Pulse la tecla 5 . Está ajustado el inicio diferido. Para iniciar el programa de lavado de inmediato, cancele el inicio diferido. El bloqueo de seguriDesactive el bloqueo de seguridad para niños está acti- dad para niños. vado.
ESPAÑOL Problema 25 Causa posible Posible solución Se ha ajustado la temperatura incorrecta. Asegúrese de ajustar la temperatura correcta. Demasiada carga de co- Reduzca la carga. lada. Una vez finalizada la revisión, conecte el aparato. El programa continuará a partir del punto en que se haya interrumpido. Si el problema se vuelve a producir, póngase en contacto con el servicio técnico. Si la pantalla muestra otros códigos de alarma, diríjase al servicio técnico. 11.
www.aeg.
ESPAÑOL 27
108755600-A-282012 www.aeg.