EN User Manual Washing Machine L 87480 FL
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 6 4. CONTROL PANEL...........................................................................................................7 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
ENGLISH • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • This appliance complies with the E.E.C. Directives. 2.3 Water connection • Do not cause damage to the water hoses. • Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear. • Ensure that there are no visible water leaks during and after the first use of the appliance. 2.
www.aeg.com 3. PRODUCT DESCRIPTION 3.1 Appliance overview 1 2 3 4 1 2 3 4 5 6 7 Worktop Detergent dispenser Control panel Door handle Rating plate Drain pump filter Feet for levelling the appliance 5 6 7 3.2 How to activate the child safety device To close the door, turn the device anticlockwise until the groove is vertical. This device prevents children or pets from being closed in the drum. 3.3 Fixing plate kit (4055171146) Turn the device clockwise, until the groove is horizontal.
ENGLISH 4. CONTROL PANEL 4.1 Control panel description 1 2 3 蒸汽防皱 棉麻标准 蒸汽清新 静音 Cottons Anticrease Extra Silent Refresh 棉麻节能 化纤 节能 易熨 Synthetics Cottons Eco Super Eco Easy Iron 精细 20 Min. - 3 kg Delicates 羊毛/丝绸 牛仔服 Wool/Silk Jeans 大件 漂洗 Duvet Rinse 脱水/排水 自动关机 Spin/Drain 60℃ 抗过敏 Anti-Allergy AutoOff 温度 脱水 去污/预洗 Temp.
www.aeg.com Spin speed of the set programme B No Spin symbol1) Rinse hold symbol 1) Only available for SPIN/DRAIN programme. The phase symbols When a programme is set, all the symbols of the phases related to the programme come on. When the programme starts, only the symbol of the phase in operation flashes. When the programme is completed, the symbol of the last phase is on.
ENGLISH 9 Programme time When the programme starts, the programme time decreases with steps of 1 minute. Delay start When you press the delay start button, the display shows the delay start time Alarm codes If the appliance has a malfunction, the display shows alarm codes. Refer to «Troubleshooting». H The display shows this message for some seconds when: • you cannot set a function with the washing programme • you try to change the washing programme while it operates. When the programme is completed.
www.aeg.com the Stain symbol comes on when you activate the function. The Prewash symbol comes on when this function is activated. L The indicator bar is not fully filled when you set only one of the functions. The indicator bar is fully filled when you set the two functions. 5. PROGRAMMES 5.1 Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) Cottons 95°C - Cold 8 kg 1400 rpm White cotton and coloured cotton.
ENGLISH 11 Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) Rinse 4) Cold 8 kg 1400 rpm To rinse and spin the laundry. All fabrics, except woollens and very delicate fabrics. Reduce the spin speed accordingly to the type of laundry. Jeans 60°C - Cold 8 kg 1200 rpm Items in denim and jersey. Also for dark coloured items. 20 Min.-3kg 40°C - 30°C 3 kg 1200 rpm Cotton and synthetic items with light soil level or worn only once.
www.aeg.com Programme Temperature range Anticrease Maximum load Maximum spin speed Programme description (Type of load and soil level) 1,5 kg Steam programme for synthetic items. This cycle helps to dewrinkle the laundry. 1) To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin phase. The appliance adds some rinses. 2) During this cycle the drum rotates slowly to ensure a gentle wash.
ENGLISH 13 Wool/Silk ■ Duvet ■ Anti-Allergy ■ Spin/Drain5) ■ Rinse ■ ■ Jeans ■ ■ 20 Min.-3kg ■ Super Eco ■ ■ ■ ■ Cottons Eco ■ ■ ■4) ■ Delay Start Time Save 3) Extra Rinse 2) Stains/Prewash 1) Programme ■ ■ ■ ■ ■ ■ ■ ■6) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 7) ■ 1) If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a temperature lower than 40°C. 2) With a low spin speed the appliance performs delicate rinses and a short spin.
www.aeg.com 6. CONSUMPTION VALUES The data in this table are approximate. Different variables can affect the data: the quantity and type of laundry, the water and ambient temperature. At the start of the programme, the display shows the programme duration for the maximum load capacity. During the washing phase the programme duration is automatically calculated and can be greatly reduced if the laundry load is lower than the maximum load capacity (e.g.
ENGLISH Off Mode (W) 15 Left On Mode (W) The information given in the chart above is compliant with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC. 7. OPTIONS 7.1 Start/Pause Start/Pause Press button Start/Pause to start or interrupt a programme. 7.2 Delay Start Delay Start With this option you can delay the start of a programme from 30 minutes to 20 hours. The display shows the related indicator and delay time. 7.
www.aeg.com 8. SETTINGS 8.1 Acoustic signals The acoustic signals operate when: • You activate the appliance. • You deactivate the appliance. • You press the buttons. • The programme is completed. • The appliance has a malfunction. To deactivate/activate the acoustic signals, press Stains/Prewash and Extra Rinse at the same time for 6 seconds. If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. 8.
ENGLISH 17 2. Press the lever down to remove the dispenser. 1 2 10.3 Filling the detergent and additives 3. To use powder detergent, turn the flap up. A Compartment for prewash phase an soak programme. Compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liquid additives. Compartment for stain remover. Flap for powder or liquid detergent. Always follow the instructions that you find on the packaging of the detergent products.
www.aeg.com With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit shown on in the flap. • Do not set the prewash phase. • Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. 10.7 Starting a programme with the delay start 10.
ENGLISH Now, you can set a new washing programme. Before starting the new programme the appliance could drain the water. In this case, make sure that the detergent is still in the detergent compartment, if not fill the detergent again. 10.11 Interrupting a programme and changing a option You can change only some options before they operate. 1. Press button Start/Pause. The related indicator flashes. 2. Change the option set. 3. Press the button Start/Pause again. The programme continues. 10.
www.aeg.com Press the button AutoOff to activate the appliance again. The display shows the end of the last set programme. Turn the programme knob to set a new cycle. If you set a programme or an option that ends with water in the drum, the AUTO OFF function doesn't deactivate the appliance to remind you to drain the water. 11. HINTS AND TIPS WARNING! Refer to Safety chapters. Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric. 11.
ENGLISH 11.5 Water hardness If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener. 21 To know the water hardness in your area, contact your local water authority. Use the correct quantity of the water softener. Obey the instructions that you find on the packaging of the product. 12. CARE AND CLEANING WARNING! Refer to Safety chapters. 12.
www.aeg.com 12.6 Cleaning the detergent dispenser 1. 2. 1 2 3. 4. 12.7 Cleaning the drain filter Do not clean the drain filter if the water in the appliance is hot. 1. 2.
ENGLISH 3. 4. 1 5. 2 6. 1 2 7. 8. 1 2 9.
www.aeg.com 12.8 Cleaning the inlet hose and the valve filter 1. 2. 1 2 3 3. 4. 45° 20° 12.9 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2.
ENGLISH 25 13. TROUBLESHOOTING • - The appliance door is open or not closed correctly. Please check the door! 13.1 Introduction • The appliance does not start or it stops during operation. - The mains supply is unstable. Wait until the mains supply is stable. • First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. - No communication between electronic elements of the appliance. Switch off and switch on again.
www.aeg.com Problem Possible solution The appliance does not fill with water and drain immediately. Make sure that the drain hose is in the correct position. The hose may be too low. The appliance does not drain the water. Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Make sure that the connection of the drain hose is correct.
ENGLISH Problem 27 Possible solution Add more laundry in the drum. The load may be too small. The cycle is shorter than the time displayed. The appliance calculates a new time according to the laundry load. See the ‘Consumption Values’ chapter. The cycle is longer than the time displayed. An unbalanced laundry load increases the duration time. This is a normal behaviour of the appliance. The washing results are not satisfactory. Increase the detergent quantity or use a different detergent.
www.aeg.com 5. Take out the laundry and then close the appliance door. 6. Close the filter flap. 15.
ENGLISH 29
www.aeg.
ENGLISH 31
132894970-A-052016 www.aeg.