L 87495 XFL DE WASCHMASCHINE BENUTZERINFORMATION
www.aeg.com INHALT 4 6 7 7 8 13 18 18 18 18 20 21 23 25 30 33 SICHERHEITSHINWEISE TECHNISCHE DATEN GERÄTEBESCHREIBUNG ZUBEHÖR BEDIENFELD PROGRAMME VOR DER ERSTEN INBETRIEBNAHME GEBRAUCH DES GERÄTS EINFÜLLEN DER WÄSCHE EINFÜLLEN VON WASCH- UND PFLEGEMITTELN EINSTELLEN UND STARTEN EINES PROGRAMMS AM PROGRAMMENDE PRAKTISCHE TIPPS UND HINWEISE REINIGUNG UND PFLEGE FEHLERSUCHE MONTAGE UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol .
DEUTSCH 3 FÜR PERFEKTE ERGEBNISSE Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
www.aeg.com SICHERHEITSHINWEISE Lesen Sie vor der Montage und Anwendung sorgfältig dieses Handbuch: • Für Ihre Sicherheit und die Sicherheit Ihres Eigentums. • Zum Schutz der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses an einem anderen Ort aufstellen oder es an eine andere Person weitergeben. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Montage oder Verwendung Schäden verursacht.
DEUTSCH Ein falsch eingesetzter Filter führt zu Wasserlecks. MONTAGE • Das Gerät ist schwer, Vorsicht beim Transport. • Transportieren Sie das Gerät nicht ohne die Transportschrauben. Sonst könnten innere Bauteile beschädigt und Lecks oder Betriebsstörungen verursacht werden. • Schließen Sie ein beschädigtes Gerät nicht an. • Achten Sie darauf, sämtliche Verpackungsmaterialien und Transportschrauben zu entfernen.
www.aeg.com TECHNISCHE DATEN Abmessungen Elektrischer Anschluss: Breite / Höhe / Tiefe 640 mm Spannung Gesamtleistung Sicherung Frequenz 230 V 2200 W 10 A 50 Hz Die Schutzklasse gewährleistet einen Schutz gegen das Eindringen von festen Fremdkörpern und Spritzwasser (Feuchtigkeit), außer an den Stellen, an denen das Niederspannungsgerät keinen Schutz gegen Feuchtigkeit besitzt Wasserdruck 600 / 850 / 605 mm Gesamttiefe IPX4 Min. 0,5 bar (0,05 MPa) Max.
DEUTSCH 7 GERÄTEBESCHREIBUNG 1 2 3 8 9 10 4 5 11 6 12 7 1 Arbeitsplatte 8 Wasserablaufschlauch 2 Waschmittelschublade 3 Bedienfeld 9 Wassereinlassventil 10 Netzkabel 4 Türgriff 11 Transportschrauben 5 Typenschild 6 Ablaufpumpe 12 Schraubfüße zum Ausrichten des Ge- räts 7 Schraubfüße zum Ausrichten des Ge- räts ZUBEHÖR 1 2 1 Schraubenschlüssel Zum Lösen der Transportschrauben.
www.aeg.com BEDIENFELD 1 2 3 Glätten Koch/Bunt Auffrischen Extra Leise Energiesparen Pflegeleicht Leichtbügeln Super Eco 20Min. - 3kg Feinwäsche Jeans Spülen Schleudern/ / Pumpen W Wolle/Seide Daunen Anti-Allergie Auto Off Temp. U./Min. Flecken/ Vorw.
DEUTSCH DISPLAY 3 A B C D L E K F G J H I Im Display erscheint: Die Temperatur des eingestellten Programms A Kaltes Wasser Die Schleuderdrehzahl des eingestellten Programms B Symbol Kein Schleudergang 1) Symbol Spülstopp 1) Nur verfügbar für das Programm Schleudern/Abpumpen. Vorwaschgang Hauptwaschgang Spülgänge C Schleudergang Phasensymbole • Wenn ein Programm ausgewählt wird, leuchten alle Symbole der im Programm vorkommenden Programmphasen auf.
www.aeg.com Das Türverriegelungssymbol erscheint, wenn das Programm beginnt. Sie können die Tür des Geräts nicht öffnen, solange dieses Symbol erscheint. Sie können die Tür erst öffnen, wenn das Symbol erlischt. F Wenn das Symbol nicht erlischt, obwohl das Programm beendet ist: • Die Spülstopp-Funktion ist eingeschaltet. • Es befindet sich Wasser in der Trommel. Das Zeitvorwahlsymbol leuchtet auf, wenn Sie die Funktion Zeitvorwahl eingestellt haben.
DEUTSCH 11 Der angezeigte Wert gibt die Gesamtanzahl der Spülgänge an. Der Anzeigebalken ist komplett gefüllt, wenn Sie die maximale Anzahl Spülgänge einstellen. Das Fleckensymbol leuchtet beim Aktivieren der Funktion auf. L Das Symbol für Vorwäsche leuchtet beim Aktivieren der Funktion auf. Der Anzeigebalken ist nicht ganz gefüllt, wenn Sie nur eine der Funktionen einstellen. Der Anzeigebalken ist vollständig gefüllt, wenn Sie beide Funktionen einstellen.
www.aeg.com Das Display zeigt nur die Schleuderdrehzahlen an, die mit dem eingestellten Programm verfügbar sind. • Schalten Sie den Schleudergang aus. • Aktivieren Sie die Spülstopp-Funktion. Stellen Sie diese Funktion ein, um Knitterfalten zu vermeiden. Das Gerät pumpt das Wasser am Ende des Programms nicht ab. TEMPERATUR-TASTE 10 Drücken Sie die Taste 10 zum Ändern der Standardtemperatur. Wenn das Display - - anzeigt, heizt das Gerät das Wasser nicht auf.
DEUTSCH 13 PROGRAMME Programm Temperatur Wäschetyp Max. Beladung ProFunktionen grammbeschreibung Koch/Bunt 95 °C - Kalt Weiße und bunte Baumwolle, normal verschmutzt. Max. Beladung 9 kg Waschgang Spülgänge Langer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP VORWÄSCHE1) EXTRA SPÜLEN FLECKEN2) ZEIT SPAREN3) Extra Leise 95 °C - Kalt Weiße und bunte Baumwolle, normal verschmutzt. Max.
www.aeg.com Programm Temperatur Wäschetyp Max. Beladung ProFunktionen grammbeschreibung Wolle / Seide 40 - 0° Waschmaschinenfeste Wolle. Handwaschbare Wolle und Feinwäsche mit dem „Handwäsche“-Pflegesymbol. Max. Beladung 2 kg WaschDREHZAHLREgang DUZIERUNG Spülgän- SPÜLSTOPP ge Kurzer Schleudergang Daunen 60 - 30° Eine einzelne Decke aus Synthetik, Bettdecke, Bettlaken usw. Max. Beladung 2 kg WaschDREHZAHLREgang DUZIERUNG Spülgänge Kurzer Schleudergang Anti-Allergie 60° Weiße Baumwolle.
DEUTSCH 15 Programm Temperatur Wäschetyp Max. Beladung ProFunktionen grammbeschreibung 20 Min. - 3kg 40° - 30° Teile aus Baumwolle oder Synthetik, die leicht verschmutzt sind oder nur einmal getragen wurden. Max. Beladung 3 kg WaschDREHZAHLREgang DUZIERUNG Spülgänge Kurzer Schleudergang Super Eco7) 0° Mischfasern (Baumwolle und Synthetik). Max.
www.aeg.com DAMPFPROGRAMME Programm1) Wäschetyp Max. Beladung Dampf Auffrischen Dieses Programm beseitigt Gerüche aus der Wäsche. Baumwolle und Synthetik. bis zu 1.5 kg Dampf beseitigt keine Tiergerüche. Dampf Glätten Dieses Programm hilft bei der Beseitigung von Falten in der Wäsche. bis zu 1.5 kg Dampf kann für getrocknete, gewaschene oder einmal getragene Wäsche benutzt werden. Diese Programme können Falten und Gerüche reduzieren und machen Ihre Wäsche glatter. Verwenden Sie kein Waschmittel.
DEUTSCH Programme Beladung (kg) Energieverbrauch (kWh) Wasserverbrauch (Liter) Ungefähre Programmdauer (in Minuten) Restfeuchte (%)1) 2 0.35 57 58 30 Wolle/Handwäsche 30 °C Standardprogramme Bauwolle Standardprogramm Baumwolle 60 °C 9 0.9 65 233 44 Standardprogramm Baumwolle 60 °C 4 0.58 40 198 44 Standardprogramm Baumwolle 40 °C 4 0.46 40 178 44 1) Am Ende der Schleuderphase. Modell L 87495 XFL 17 Aus-Zustand (W) Ein-Zustand (W) 0.05 0.
www.aeg.com VOR DER ERSTEN INBETRIEBNAHME Zum Aktivieren des Ablaufsystems füllen Sie 2 Liter Wasser in das Hauptfach der Waschmittelschublade. 2. Geben Sie eine kleine Waschmittelmenge in das Hauptfach der Waschmittelschublade. Stellen Sie ein Koch/ Buntwäsche-Programm mit der höchsten Temperatur ein und starten Sie das Programm mit leerer Trommel. So werden alle eventuellen Verunreinigungen aus Trommel und Bottich entfernt. 1. GEBRAUCH DES GERÄTS 1. 2. Drehen Sie den Wasserhahn auf.
DEUTSCH 19 Waschmittelfach für die Vorwaschphase und das Einweichprogramm. Füllen Sie das Waschmittel für den Vorwaschgang und das Einweichen vor dem Start des Programms ein. Waschmittelfach für die Waschphase. Wenn Sie Flüssigwaschmittel verwenden, muss dieses direkt vor dem Start des Programms eingefüllt werden. Fach für flüssige Pflegemittel (Weichspüler, Stärke). Füllen Sie das Pflegemittel in das Fach ein, bevor Sie das Programm starten. Das ist die maximale Menge für flüssige Pflegemittel.
www.aeg.com 4. Drehen Sie die Klappe nach unten, wenn Sie Flüssigwaschmittel verwenden. Klappe in der Position „Unten“: – Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. – Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Markierungslinie auf der Klappe. – Stellen Sie nicht den Vorwaschgang ein. – Stellen Sie nicht die Zeitvorwahl ein. 5. 6. Messen Sie Waschmittel und Weichspüler ab. Schließen Sie die Waschmittelschublade vorsichtig.
DEUTSCH 2. Ändern Sie die eingestellte Funktion. 21 ÖFFNEN DER TÜR EINSTELLEN DER ZEITVORWAHL Während ein Programm oder die Zeitvorwahl aktiv ist, ist die Tür verriegelt. 1. Drücken Sie die Taste 5 wiederholt, bis das Display die Zeit in Minuten und Stunden anzeigt. Die entsprechenden Symbole leuchten auf. 1. 2. Nach dem Drücken der Taste 4 beginnt das Gerät die vorgewählte Zeit herunterzuzählen. Nach Ablauf der Zeitvorwahl startet das Programm automatisch.
www.aeg.com 2. Drücken Sie die Start/Pause-Taste 4 . Das Gerät pumpt das Wasser ab und schleudert. 3. Wenn das Programm beendet ist und das Türverriegelungssymbol erlischt, können Sie die Tür öffnen. 4. Schalten Sie das Gerät aus. Nach etwa 18 Stunden pumpt das Gerät automatisch das Wasser ab und schleudert.
DEUTSCH 23 PRAKTISCHE TIPPS UND HINWEISE BELADUNG • Teilen Sie die Wäsche auf, in: Kochwäsche, Buntwäsche, Synthetik, Feinwäsche und Wolle. • Halten Sie sich an die Anweisungen auf den Kleidungsetiketten. • Waschen Sie weiße und bunte Wäsche nicht zusammen. • Manche farbigen Textilien können beim ersten Waschen färben. Wir empfehlen, sie deshalb die ersten Male separat zu waschen. • Knöpfen Sie Kopfkissen zu und schließen Sie Reißverschlüsse, Haken und Druckknöpfe. Schließen Sie Gürtel.
www.aeg.com Wasserhärtetabelle Härtegrad Art Wasserhärte °dH °TH mmol/l Clarke 1 weich 0-7 0-15 0-1.5 0-9 2 mittel 8-14 16-25 1.6-2.5 10-16 3 hart 15-21 26-37 2.6-3.7 17-25 4 sehr hart > 21 > 37 >3.
DEUTSCH 25 REINIGUNG UND PFLEGE WARNUNG! Trennen Sie das Gerät von der Stromversorgung, bevor Sie es reinigen. ENTKALKEN Normales Leitungswasser enthält Kalk. Falls erforderlich, benutzen Sie einen Enthärter, um Kalkablagerungen zu entfernen. Verwenden Sie ein Produkt, das speziell für Waschmaschinen hergestellt wird. Halten Sie sich an die Herstelleranweisungen auf der Verpackung. Führen Sie die Entkalkung nicht gleichzeitig mit einer Wäsche durch.
www.aeg.com WASCHMITTELSCHUBLADE So reinigen Sie die Waschmittelschublade: 1 1. 2. Drücken Sie auf den Hebel. Ziehen Sie die Waschmittelschublade heraus. 3. Entfernen Sie den oberen Teil des Pflegemittelfachs. Reinigen Sie alle Teile mit Wasser. 2 4. 5. 6. ABLAUFPUMPE Kontrollieren Sie regelmäßig die Ablaufpumpe und sorgen Sie dafür, dass sie sauber ist. Reinigen Sie die Pumpe in folgenden Fällen: • Das Gerät pumpt das Wasser nicht ab. • Die Trommel dreht sich nicht.
DEUTSCH 27 So reinigen Sie die Ablaufpumpe: 1. Öffnen Sie die Ablaufpumpenklappe. 2. Ziehen Sie die Klappe zum Entfernen heraus. 3. Stellen Sie einen Behälter unter die Ablaufpumpe, um das auslaufende Wasser aufzufangen. Drücken Sie die zwei Hebel und ziehen Sie den Ablaufkanal nach vorn, um das Wasser auslaufen zu lassen. 4. 1 5. 6. 2 Wenn der Behälter mit Wasser voll ist, stecken Sie den Ablaufkanal wieder ein und leeren Sie den Behälter aus.
www.aeg.com 9. Reinigen Sie den Filter unter fließendem Wasser und setzen Sie ihn wieder in die dafür vorgesehenen Führungen in der Pumpe ein. 10. Achten Sie darauf, dass Sie den Filter richtig fest anziehen, um Wasserlecks zu vermeiden. 11. Bringen Sie die Ablaufpumpenklappe wieder an und schließen Sie diese. 2 1 ZULAUFSCHLAUCHFILTER UND VENTILFILTER Die Filter müssen in folgenden Fällen gereinigt werden: • Es läuft kein Wasser in das Gerät. • Das Wasser läuft sehr lange in das Gerät ein.
DEUTSCH Füllen Sie 2 Liter Wasser in das Hauptfach der Waschmittelschublade ein. 2. Starten Sie das Programm zum Abpumpen des Wassers. 1. FROSTSCHUTZMASSNAHMEN Falls das Gerät in einem Bereich installiert ist, in dem die Temperatur unter 0 °C sinken kann, entfernen Sie das im Zulaufschlauch und in der Ablaufpumpe verbliebene Wasser. 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2. Schließen Sie den Wasserhahn. 3. Entfernen Sie den Wasserzulaufschlauch. 4.
www.aeg.com FEHLERSUCHE Das Gerät startet nicht oder stoppt während des Betriebs. Versuchen Sie zunächst eine Lösung für das Problem zu finden (siehe Tabelle). Wenn Sie keine Lösung finden, wenden Sie sich an den Kundendienst. • - Die Gerätetür steht offen oder ist nicht richtig geschlossen. • - Die Aquasafe-Einrichtung ist ausgelöst. Bei einigen Problemen ertönt ein Signalton und das Display zeigt einen Alarmcode an: • - Es läuft kein Wasser in das Gerät.
DEUTSCH Problem Mögliche Ursache Mögliche Abhilfe Die Gerätetür steht offen oder ist nicht richtig geschlossen. Schließen Sie die Tür richtig. Die Aquasafe-Einrichtung ist aktiv. • Schalten Sie das Gerät aus. • Schließen Sie den Wasserhahn. • Wenden Sie sich an den Kundendienst. Das Gerät schleudert nicht. 31 Die Schleuderphase ist ausgeschaltet. Stellen Sie das Schleuderprogramm ein. Der Filter der Ablaufpumpe ist zugesetzt. Reinigen Sie den Filter der Ablaufpumpe.
www.aeg.com Problem Mögliche Ursache Mögliche Abhilfe Das Gerät verursacht ein ungewöhnliches Geräusch. Das Gerät ist nicht ausgerichtet. Richten Sie das Gerät waagrecht aus. Siehe hierzu „Montage“. Sie haben die Verpackungsmaterialien und/ oder die Transportschrauben nicht entfernt. Entfernen Sie die Verpackungsmaterialien und/oder die Transportschrauben. Siehe hierzu „Montage“. Es ist sehr wenig Wäsche Füllen Sie mehr Wäsche ein. in der Trommel.
DEUTSCH 33 MONTAGE 1 SATZ FIXIERPLATTEN (405517114) Sie erhalten den Bausatz bei Ihrem Vertragshändler. Wenn Sie das Gerät auf einem Sockel aufstellen, befestigen Sie es mithilfe der Fixierplatten. Lesen Sie aufmerksam die dem Bausatz beiliegende Anleitung. AUSPACKEN 1. Verwenden Sie Handschuhe. Entfernen Sie die äußere Folie. Benutzen Sie, falls erforderlich, ein Teppichmesser. 2. Nehmen Sie die Karton-Abdeckung ab. Entfernen Sie die Styropor-Verpackungsteile. 3. 4.
www.aeg.com 5. Öffnen Sie die Tür. Entfernen Sie das Styroporteil aus der Türdichtung und alle Teile aus der Trommel. 6. Legen Sie eines der Styroporverpackungsteile hinter dem Gerät auf den Boden. Legen Sie das Gerät vorsichtig mit der Rückseite darauf ab. Achten Sie darauf, die Schläuche nicht zu beschädigen. 7. Entfernen Sie den Styroporschutz von der Geräteunterseite. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. 8. 1 2 9.
DEUTSCH 35 10. Lösen Sie die drei Schrauben. Ver- wenden Sie dazu den mitgelieferten Schraubenschlüssel. 11. Ziehen Sie die Kunststoff-Abstandshalter heraus. 12. Setzen Sie die Kunststoffkappen in die Öffnungen. Diese Kappen finden Sie im Beutel mit der Gebrauchsanleitung. WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben. Wir empfehlen, Verpackungsmaterial und Transportschrauben für einen späteren Transport aufzubewahren.
www.aeg.com • Das Gerät muss einen waagerechten und festen Stand haben. VORSICHT! Schieben Sie weder Karton noch Holz oder ähnliche Materialien unter die Stellfüße, um das Gerät auszurichten. WASSERZULAUFSCHLAUCH • Schließen Sie den Schlauch am Gerät an. Drehen Sie den Wasserzulaufschlauch nur nach links oder rechts. Lösen Sie die Ringmutter, um ihn in die gewünschte Position zu bewegen. 20 O 45 O • Schließen Sie den Wasserzulaufschlauch an einen Kaltwasserhahn mit einem 3/4"-Außengewinde an.
DEUTSCH 37 Aquastopp-Einrichtung A Der Zulaufschlauch verfügt über eine Wasserstopp-Vorrichtung. Damit werden Wasserlecks am Schlauch, die durch natürliche Alterung auftreten könnten, verhindert. Der rote Bereich im Fenster „A“ zeigt diesen Fehler an. Tritt dieser Fall ein, drehen Sie den Wasserhahn zu und wenden Sie sich an den Kundendienst, um den Schlauch zu erneuern. WASSERABLAUF Es gibt mehrere Möglichkeiten, den Ablaufschlauch anzuschließen: Mit der Kunststoff-Schlauchführung.
www.aeg.com Ohne Kunststoff-Schlauchführung. • An einen Siphon. Orientieren Sie sich an der Abbildung. Stecken Sie den Ablaufschlauch in den Siphon und befestigen Sie ihn mit einer Schlauchschelle. Stellen Sie sicher, dass der Schlauch einen Bogen beschreibt, damit kein Schmutz aus dem Siphon in das Gerät gelangen kann. • Direkte Einleitung in ein Abflussrohr in der Zimmerwand. Mit einer Schlauchschelle befestigen. Sie können den Ablaufschlauch auf maximal 400 cm verlängern.
DEUTSCH 39
www.aeg.