User manual

Set the washing programme and all
possible functions again.
• 5 minutes after the end of the
washing programme.
Refer to "AUTO Stand-by option".
7.2 Programme knob
Turn this knob to set a programme. The
related programme indicator comes on.
7.3 Temperature
Press this button to change the default
temperature. When the display shows
and , the appliance does not heat
the water.
7.4 Spin
Press this button to:
• Decrease the maximum speed of the
programme spin phase.
The display indicates only
the spin speeds available
for the set programme.
• Deactivate the spin phase.
• Activate the Rinse Hold option.
Set this option to prevent fabrics from
creasing. The washing programme
ends with water in the drum. The
drum turns regularly to reduce
creasing.
The door stays locked. You must drain
the water to unlock the door.
7.5 Stains/Prewash
Press this button to add the stain and the
prewash phase to a programme.
Press the button repeatedly to activate
one or both options. The related
indicator and the indicator bar illuminate
in the display.
• Stains: Use this option for laundry
with hard stains to remove.
When you set this option, put the
stain remover into compartment .
This option increases the programme
duration.
This option is not
available with a
temperature lower than
40° C.
• Prewash: Use this option to add a
prewash phase before the washing
phase.
We recommend that you use this
option when you have very soiled
laundry.
This option increases the
programme duration.
7.6 Extra Rinse
Press the Extra Rinse button to add
rinsing phases to a programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
7.7 Time Save
With this option you can decrease the
programme duration.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set
'Extra Quick' for slightly soiled items
only.
Some programmes accept
only one of the two options.
7.8 Delay Start
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator
and delay time.
7.9 Start/Pause
Press button Start/Pause to start or
interrupt a programme.
7.10 Drying Level
Press this button to set one of 3
automatic dryness levels available. The
display shows the symbol of the set level:
www.aeg.com
18