User manual

Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water con-
sumption (li-
tre)
Approximate pro-
gramme duration
(minutes)
Cottons 60°C 9 1.6 69 168
Cottons Eco
1)
9 1.05 56 244
Cottons 40°C 9 1.0 69 164
Synthetics 40°C 4 0.6 48 105
Delicates 40°C 4 0.7 58 86
Wool/Handwash 30°C 2 0.35 57 61
1)
This programme at 60 °C is the reference programme for energy label data, in compliance with UAE. S
5010 2:2013.
7. OPTIONS
7.1 On/Off
Press this button to activate or deactivate
the appliance. A tune sounds when the
appliance is activated.
The AUTO Stand-by function
automatically deactivates the appliance
to decrease the energy consumption
when:
You do not use the appliance for 5
minutes before you press the Start/
Pause button.
All settings are cancelled.
Press the On/Off button to activate
the appliance again.
Set the washing programme and all
possible functions again.
5 minutes after the end of the
washing programme.
Refer to "AUTO Stand-by option".
7.2 Programme knob
Turn this knob to set a programme. The
related programme indicator comes on.
7.3 Temperature
Press this button to change the default
temperature. When the display shows
and , the appliance does not heat
the water.
7.4 Spin
Press this button to:
Decrease the maximum speed of the
programme spin phase.
The display indicates only
the spin speeds available
for the set programme.
Deactivate the spin phase.
Activate the Rinse Hold option.
Set this option to prevent fabrics from
creasing. The washing programme
ends with water in the drum. The
drum turns regularly to reduce
creasing.
The door stays locked. You must drain
the water to unlock the door.
7.5 Stains/Prewash
Press this button to add the stain and the
prewash phase to a programme.
Press the button repeatedly to activate
one or both options. The related
indicator and the indicator bar illuminate
in the display.
Stains: Use this option for laundry
with hard stains to remove.
When you set this option, put the
stain remover into compartment .
This option increases the programme
duration.
ENGLISH
17