Quick Guide

AB C D E
F
GHI
INTERACTIVE DISPLAY
The appliance adjusts automatically the cycle time to the laundry load
to have PERFECT washing results in the minimum necessary time.
After about 15 minutes from the start of the programme, the display
shows the new time value.
With this special device, already during loading, the appliance shows
the real cycle duration and the correct quantity of detergent to put for
each type and amount of laundry.
Since a small load may need less than half time of a full load, every
time you use the appliance you will appreciate the usefulness of the
weight sensor and its instant time calculation.
The OPTISENSE wash The Weight Sensor
STEAM
DOOR LOCK
DETERGENT OVERDOSERING
DELAY START
A The temperature value
B The spin speed value, No Spin and Rinse Hold function
C The washing phase symbols
D The function symbols
E The digit area:
The Washing programme duration
The Delay/Start set
The Alarm codes (refer to the “Troubleshooting” chapter)
The Err message when you make a wrong selection
The End of the programme ( )
F The weight sensor area
With the door opened:
The maximum load for each programme ( )
The weight of the laundry that you put in the drum ( )
With the door closed:
The symbol of detergent
The percentage of the detergent quantity
Indicator bars:
The empty indicator bars come on when the related fuctions are available
with the set programme. In setting mode they fill accordingly to the
function availability.
G TIME SAVE
The symbol comes on when you set one of these functions:
Shortened duration
Extra quick
H The EXTRA RINSE symbol comes on when this function is activated.
I The PREWASH/STAIN symbols. The indicator bar fills accordingly
to the set function.
The simple and logic display gives immediately all the information about the washing programme