L 88489 FL2 L 88689 FL2 DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. SICHERHEITSINFORMATIONEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 TECHNISCHE DATEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 3 1. SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
www.aeg.com • Nehmen Sie keine technischen Änderungen am Gerät vor. • Beachten Sie die maximale Beladungsmenge von 8 kg (siehe Kapitel „Programmtabelle“). • Wenn das Netzkabel beschädigt ist, muss es vom Hersteller, einem autorisierten Kundendienst oder einer gleichermaßen qualifizierten Person ersetzt werden, um Gefahrenquellen zu vermeiden. • Der Betriebswasserdruck (Mindest- und Höchstdruck) muss zwischen 0,5 bar (0,05 MPa) und 8 bar (0,8 MPa) liegen.
DEUTSCH • • • • • • • chen. Wenden Sie sich andernfalls an eine Elektrofachkraft. Das Gerät darf ausschließlich an eine ordnungsgemäß installierte Schutzkontaktsteckdose angeschlossen werden. Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie dies durch unseren Kundendienst durchführen.
www.aeg.com 3. TECHNISCHE DATEN Abmessungen Breite / Höhe / Tiefe Elektrischer Anschluss: 600 / 850 / 605 mm Gesamttiefe 640 mm Spannung Gesamtleistung Sicherung Frequenz 230 V 2200 W 10 A 50 Hz Die Schutzverkleidung gewährleistet einen Schutz gegen das Eindringen von festen Fremdkörpern und Spritzwasser (Feuchtigkeit), außer an den Stellen, an denen das Niederspannungsgerät keinen Schutz gegen Feuchtigkeit besitzt. Wasserdruck IPX4 Min. 0,5 bar (0,05 MPa) Max.
DEUTSCH 5 Typenschild 9 Wassereinlassventil 6 Ablaufpumpe 7 Schraubfüße zum Ausrichten des Geräts 8 Wasserablaufschlauch 10 Netzkabel 7 11 Transportschrauben 12 Schraubfüße zum Ausrichten des Geräts 4.1 Zubehör 1 4 2 3 4.2 Einstellen der Kindersicherung • Bei aktivierter Kindersicherung lässt sich die Tür nicht schließen, damit Kinder oder Haustiere nicht in der Trommel eingeschlossen werden können.
www.aeg.com 5. BEDIENFELD 1 2 3 Glätten Koch/Bunt Auffrischen Baumwolle Eco Super Eco Extra Leise Pflegeleicht Leichtbügeln 20Min. - 3kg Feinwäsche Jeans Spülen Schleudern/ / Pumpen W Wolle/Seide Daunen Anti-Allergie Auto Off Temp. U./Min. Flecken/ Vorw. 10 9 8 1 Ein-/Aus-Taste (Auto Off) Extra Spülen 7 Zeit Sparen Zeitvorwahl 6 5 Start/Pause 4 10 Temperatur-Taste (Temp.
DEUTSCH 5.3 Display 3 A B C D M E L F G H K I J Im Display erscheint: Die Temperatur des eingestellten Programms A Kaltes Wasser Die Schleuderdrehzahl des eingestellten Programms B Symbol Kein Schleudergang1) Symbol Spülstopp 1) Nur verfügbar für das Programm Schleudern/Abpumpen. Vorwaschgang Hauptwaschgang Spülgänge Schleudergang C Symbole für die Waschgänge • Wenn ein Programm eingestellt ist, leuchten alle Symbole für die Phasen des Programms auf.
www.aeg.com Sie können die Tür des Geräts nicht öffnen, solange dieses Symbol erscheint. Sie können die Tür erst öffnen, wenn das Symbol erlischt. F Wenn das Symbol nicht erlischt, obwohl das Programm beendet ist: • Die Spülstopp-Funktion ist eingeschaltet. • Es befindet sich Wasser in der Trommel. G Das Zeitvorwahlsymbol leuchtet auf, wenn Sie die Funktion Zeitvorwahl eingestellt haben. H Das Symbol für die Kindersicherung erscheint, wenn diese Funktion aktiviert ist.
DEUTSCH 11 • Waschmittelmenge in Prozent Das Symbol zeigt die empfohlene Waschmittelmenge für die Wäsche in der Trommel an. Wenn Sie die Start/Pause-Taste drücken, erlöschen diese Symbole. Anzeigebalken Der leere Anzeigebalken erscheint nur, wenn die entsprechende Funktion für das Programm verfügbar ist. Der Anzeigebalken füllt sich entsprechend der eingestellten Funktionen. Wenn Sie eine falsche Funktion wählen, erkennen Sie an der Anzeige Err, dass die Auswahl nicht möglich ist.
www.aeg.com 5.7 Extra Spülen-Taste 7 Drücken Sie die Taste 7 , um einem Programm weitere Spülgänge hinzuzufügen. Diese Funktion empfiehlt sich in Gebieten mit weichem Wasser und für Menschen, die unter Waschmittelallergien leiden. 5.8 Flecken-/Vorwäsche-Taste 8 Drücken Sie die Taste 8 , um einem Programm eine Fleckenbehandlungsoder Vorwäsche-Phase hinzuzufügen. Drücken Sie die Taste mehrmals, um eine oder beide Optionen zu aktivieren. Im Display erscheint das entsprechende Symbol und der Anzeigebalken.
DEUTSCH 5.13 Funktion „immer extra spülen“ Mit dieser Funktion können Sie die Funktion „Extra Spülen“ stets beibehalten, auch wenn Sie ein neues Programm einstellen. • Drücken Sie zum Aktivieren der Funktion die Tasten 6 und 5 gleichzeitig 13 so lange, bis im Display das Symbol erscheint. • Drücken Sie zum Deaktivieren der Funktion die Tasten 6 und 5 gleichzeitig so lange, bis das Symbol im Display erlischt. 6. PROGRAMME Programm Temperatur Wäschetyp Max.
www.aeg.com Programm Temperatur Wäschetyp Max. Beladung Programmbeschreibung Funktionen Wolle / Seide 40 ° - Kalt Waschmaschinenfeste Wolle. Handwaschbare Wolle und Feinwäsche mit dem „Handwäsche“Pflegesymbol. Max. Beladung 2 kg Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP Daunen 60 ° - 30 ° Eine einzelne Decke aus Synthetik, Bettdecke, Bettlaken usw. Max. Beladung 3 kg Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG Anti-Allergie 60° Weiße Baumwolle.
DEUTSCH Programm Temperatur Wäschetyp Max. Beladung Programmbeschreibung Funktionen Outdoor 40 ° - Kalt Imprägnierte Kleidungsstücke, Sport- und Outdoor-Kleidung. Keinen Weichspüler verwenden! Max. Beladung 2.5 kg Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP EXTRA SPÜLEN 20 Min. - 3kg 40 ° - 30 ° Teile aus Baumwolle oder Synthetik, die leicht verschmutzt sind oder nur einmal getragen wurden. Max.
www.aeg.com Energie- und Wasserverbrauchs für das Waschen normal verschmutzter Baumwollwäsche sind dies die effizientesten Programme. Stellen Sie dieses Programm ein, wenn Sie gute Waschergebnisse erzielen und den Energieverbrauch senken möchten. Die Dauer des Waschprogramms wird dadurch verlängert. Die Wassertemperatur in der Waschphase kann von der für das ausgewählte Programm angegebenen Temperatur abweichen. DAMPFPROGRAMME Programm1) Wäschetyp Max.
DEUTSCH 17 7. VERBRAUCHSWERTE Am Programmstart zeigt das Display die Programmdauer für die maximale Beladung an. Während der Waschphase wird die Programmdauer automatisch berechnet und verringert sich möglicherweise beträchtlich, wenn die Wäsche weniger wiegt als die maximal zulässige Beladung. Zum Beispiel beträgt die maximale Beladung bei Baumwolle 60 °C 8 kg und die Programmdauer überschreitet 2 Stunden. Wiegt die tatsächliche Beladung 1 kg, verringert sich die Programmdauer auf unter 1 Stunde.
www.aeg.com Aus-Zustand (W) Ein-Zustand (W) 0.05 0.05 Die in den Tabellen oben enthaltenen Informationen erfüllen die Verordnung (EG) der Kommission zur 1015/2010 Anwendung der Richtlinie 2009/125/EC. 8. VOR DER ERSTEN INBETRIEBNAHME 1. Zum Aktivieren des Ablaufsystems füllen Sie 2 Liter Wasser in das Hauptfach der Waschmittelschublade. 2. Geben Sie eine kleine Waschmittelmenge in das Hauptfach der Waschmittelschublade.
DEUTSCH Wenn das Gewicht der Wäsche die Höchstbeladung der Trommel überschreitet, beginnen die Symbole MAX und der Wert 0.0 zu blinken. Sie können die Wäsche waschen, jedoch bei erhöhtem Wasserund Energieverbrauch. Für optimale Verbrauchswerte und Waschergebnisse sollten Sie einige Wäschestücke entfernen, bis die Symbole nicht mehr blinken. Die Anzeige für Überladung ist nur für Programme verfügbar, deren erlaubte Beladung niedriger ist als die Höchstbeladung der Maschine. 5. 19 Schließen Sie die Tür.
www.aeg.com Fach für flüssige Pflegemittel (Weichspüler, Stärke). Füllen Sie das Pflegemittel in das Fach ein, bevor Sie das Programm starten. Das ist die maximale Menge für flüssige Pflegemittel. Fach für den Fleckenentferner. Füllen Sie den Fleckenentferner in das Fach ein und stellen Sie die Funktion Flecken ein, bevor Sie das Programm starten.
DEUTSCH 4. 21 Drehen Sie die Klappe nach unten, wenn Sie Flüssigwaschmittel verwenden. Klappe in der Position „Unten“: – Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. – Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Markierungslinie auf der Klappe. – Stellen Sie nicht den Vorwaschgang ein. – Stellen Sie nicht die Zeitvorwahl ein. 5. 6. Messen Sie Waschmittel und Weichspüler ab. Schließen Sie die Waschmittelschublade vorsichtig.
www.aeg.com 2. Wenn Sie das Gerät ausschalten, müssen Sie das Programm anschließend neu einstellen. Drücken Sie die Taste 4 erneut. Das Waschprogramm wird fortgesetzt. 9.8 Abbrechen eines Programms 1. Drücken Sie die Taste 1 , um das Programm abzubrechen und das Gerät auszuschalten. 2. Drücken Sie die Taste 1 erneut, um das Gerät einzuschalten. Anschließend können Sie ein neues Waschprogramm einstellen. Das Gerät pumpt das Wasser nicht ab. 9.
DEUTSCH 23 10. TIPPS UND HINWEISE 10.1 Beladung • Teilen Sie die Wäsche auf, in: Kochwäsche, Buntwäsche, Synthetik, Feinwäsche und Wolle. • Halten Sie sich an die Anweisungen auf den Kleidungsetiketten. • Waschen Sie weiße und bunte Wäsche nicht zusammen. • Manche farbigen Textilien können beim ersten Waschen färben. Wir empfehlen, sie deshalb die ersten Male separat zu waschen. • Knöpfen Sie Kopfkissen zu und schließen Sie Reißverschlüsse, Haken und Druckknöpfe. Schließen Sie Gürtel.
www.aeg.com Wasserhärtetabelle Härtegrad Art Wasserhärte °dH °TH mmol/l Clarke 1 weich 0-7 0-15 0-1.5 0-9 2 mittel 8-14 16-25 1.6-2.5 10-16 3 hart 15-21 26-37 2.6-3.7 17-25 4 sehr hart > 21 > 37 >3.7 >25 11. REINIGUNG UND PFLEGE WARNUNG! Trennen Sie das Gerät von der Stromversorgung, bevor Sie es reinigen. 11.1 Entkalken Normales Leitungswasser enthält Kalk. Falls erforderlich, benutzen Sie einen Enthärter, um Kalkablagerungen zu entfernen.
DEUTSCH 25 11.4 Türdichtung Überprüfen Sie regelmäßig die Türdichtung und nehmen Sie alle Einzelteile aus dem Inneren heraus. 11.5 Trommel Überprüfen Sie regelmäßig, dass sich kein Kalk und keine Rostpartikel in der Trommel absetzen. Verwenden Sie zur Entfernung von Rost aus der Trommel nur Spezialprodukte. Vorgehensweise: • Reinigen Sie die Trommel mit einem Spezialreiniger für Edelstahl.
www.aeg.com WARNUNG! 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2. Entfernen Sie den Filter nicht, während das Gerät in Betrieb ist. Reinigen Sie die Ablaufpumpe nicht, wenn das Wasser im Gerät heiß ist. Das Wasser muss abgekühlt sein, bevor Sie die Ablaufpumpe reinigen. 11.7 Ablaufpumpe Kontrollieren Sie regelmäßig die Ablaufpumpe und sorgen Sie dafür, dass sie sauber ist. Reinigen Sie die Pumpe in folgenden Fällen: • Das Gerät pumpt das Wasser nicht ab. • Die Trommel dreht sich nicht.
DEUTSCH 2 1 11.8 Zulaufschlauchfilter und Ventilfilter Die Filter müssen in folgenden Fällen gereinigt werden: • Es läuft kein Wasser in das Gerät. • Das Wasser läuft sehr lange in das Gerät ein. 27 7. Entfernen Sie Flusen und Gegenstände aus der Pumpe. 8. Vergewissern Sie sich, dass sich das Flügelrad der Pumpe drehen kann. Wenn dies nicht möglich ist, wenden Sie sich an den Kundendienst. 9.
www.aeg.com 4. 5. 6. 20° 45° 7. 11.9 Notentleerung 1. Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen. In diesem Fall führen Sie die Schritte (1) bis (6) unter „So reinigen Sie die Ablaufpumpe“ durch. Reinigen Sie bei Bedarf die Pumpe. Bringen Sie den Ablaufkanal wieder in seine ursprüngliche Position und schließen Sie die Ablaufpumpenklappe. Wenn Sie das Wasser über das Notentleerungsverfahren abpumpen, müssen Sie das Abpumpsystem wieder aktivieren: 1.
DEUTSCH 29 12. FEHLERSUCHE Das Gerät startet nicht oder stoppt während des Betriebs. Versuchen Sie zunächst eine Lösung für das Problem zu finden (siehe Tabelle). Wenn Sie keine Lösung finden, wenden Sie sich an den Kundendienst. • - Das Gerät pumpt das Wasser nicht ab. • - Die Gerätetür steht offen oder ist nicht richtig geschlossen. • - Die Aquasafe-Einrichtung ist ausgelöst.
www.aeg.com Problem Mögliche Ursache Mögliche Abhilfe Die Gerätetür steht offen oder ist nicht richtig geschlossen. Schließen Sie die Tür richtig. Die Aquasafe-Einrichtung ist aktiv. • Schalten Sie das Gerät aus. • Schließen Sie den Wasserhahn. • Wenden Sie sich hierzu an den Kundendienst. Das Gerät schleudert nicht. Das Programm startet nicht. Es befindet sich Wasser auf dem Boden. Die Schleuderphase ist ausgeschaltet. Stellen Sie das Schleuderprogramm ein.
DEUTSCH 31 Problem Mögliche Ursache Mögliche Abhilfe Das Gerät verursacht ein ungewöhnliches Geräusch. Das Gerät ist nicht ausgerichtet. Richten Sie das Gerät waagrecht aus. Siehe hierzu „Montage“. Sie haben die Verpackungsmaterialien und/ oder die Transportschrauben nicht entfernt. Entfernen Sie die Verpackungsmaterialien und/oder die Transportschrauben. Siehe hierzu „Montage“. Es ist sehr wenig Wäsche in der Trommel. Füllen Sie mehr Wäsche ein.
www.aeg.com 13. MONTAGE 13.1 Satz Fixierplatten (4055171146) Sie erhalten den Bausatz bei Ihrem Vertragshändler. Wenn Sie das Gerät auf einem Sockel aufstellen, befestigen Sie es mithilfe der Fixierplatten. Lesen Sie aufmerksam die dem Bausatz beiliegende Anleitung. 13.2 Auspacken 1. Verwenden Sie Handschuhe. Entfernen Sie die äußere Folie. Benutzen Sie, falls erforderlich, ein Teppichmesser. 2. Nehmen Sie die Karton-Abdeckung ab. Entfernen Sie die Styropor-Verpackungsteile. 3. 4.
DEUTSCH 33 5. Öffnen Sie die Tür. Entfernen Sie das Styroporteil aus der Türdichtung und alle Teile aus der Trommel. 6. Legen Sie eines der Styroporverpackungsteile hinter dem Gerät auf den Boden. Legen Sie das Gerät vorsichtig mit der Rückseite darauf ab. Achten Sie darauf, die Schläuche nicht zu beschädigen. 7. Entfernen Sie den Styroporschutz von der Geräteunterseite. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. 8. 1 2 9.
www.aeg.com 10. Lösen Sie die drei Schrauben. Ver- wenden Sie dazu den mitgelieferten Schraubenschlüssel. 11. Ziehen Sie die Kunststoff-Abstandshalter heraus. 12. Setzen Sie die Kunststoffkappen in die Öffnungen. Diese Kappen finden Sie im Beutel mit der Gebrauchsanleitung. WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben. Wir empfehlen, Verpackungsmaterial und Transportschrauben für einen späteren Transport aufzubewahren. 13.
DEUTSCH 35 • Das Gerät muss einen waagerechten und festen Stand haben. VORSICHT! Schieben Sie weder Karton noch Holz oder ähnliche Materialien unter die Stellfüße, um das Gerät auszurichten. 13.4 Wasserzulaufschlauch • Schließen Sie den Schlauch am Gerät an. Drehen Sie den Wasserzulaufschlauch nur nach links oder rechts. Lösen Sie die Ringmutter, um ihn in die gewünschte Position zu bewegen. 20 O 45 O • Schließen Sie den Wasserzulaufschlauch an einen Kaltwasserhahn mit einem 3/4"-Außengewinde an.
www.aeg.com Aquastopp-Einrichtung A Der Zulaufschlauch verfügt über eine Wasserstopp-Vorrichtung. Damit werden Wasserlecks am Schlauch, die durch natürliche Alterung auftreten könnten, verhindert. Der rote Bereich im Fenster „A“ zeigt diesen Fehler an. Tritt dieser Fall ein, drehen Sie den Wasserhahn zu und wenden Sie sich an den Kundendienst, um den Schlauch zu erneuern. 13.5 Wasserablauf Es gibt mehrere Möglichkeiten, den Ablaufschlauch anzuschließen: Mit der Kunststoff-Schlauchführung.
DEUTSCH 37 Ohne Kunststoff-Schlauchführung. • An einen Siphon. Orientieren Sie sich an der Abbildung. Stecken Sie den Ablaufschlauch in den Siphon und befestigen Sie ihn mit einer Schlauchschelle. Stellen Sie sicher, dass der Schlauch einen Bogen beschreibt, damit kein Schmutz aus dem Siphon in das Gerät gelangen kann. • Direkte Einleitung in ein Abflussrohr in der Zimmerwand. Mit einer Schlauchschelle befestigen. Sie können den Ablaufschlauch auf maximal 400 cm verlängern.
www.aeg.
DEUTSCH 39
132926921-A-502012 www.aeg.