LAVAMAT 89379TL USER MANUAL DE Benutzerinformation Waschmaschine
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE...........................................................................................3 2. SICHERHEITSANWEISUNGEN................................................................................ 5 3. GERÄTEBESCHREIBUNG.........................................................................................6 4. BEDIENFELD............................................................................................................. 7 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com 1.2 Allgemeine Sicherheit • • • • • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor. Überschreiten Sie nicht die maximale Beladungsmenge von 7 kg (siehe Kapitel „Programmübersicht“). Der Betriebswasserdruck am Wassereinlass der Wasserversorgung muss zwischen 0,5 bar (0,05 MPa) und 8 bar (0,8 MPa) liegen. Die Lüftungsöffnung im Gerätesockel (falls vorhanden) darf nicht von einem Teppich, einer Matte oder einem Bodenbelag blockiert werden.
DEUTSCH 5 2. SICHERHEITSANWEISUNGEN 2.1 Montage Typenschild den Daten Ihrer Stromversorgung entsprechen. Wenden Sie sich anderenfalls an eine Elektrofachkraft. Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen. Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose.
www.aeg.com • Dieses Gerät ist ausschließlich zur Verwendung im Haushalt bestimmt. • Beachten Sie die Sicherheitsanweisungen auf der Waschmittelverpackung. • Platzieren Sie keine entflammbaren Produkte oder Gegenstände, die mit entflammbaren Produkten benetzt sind, im Gerät, auf dem Gerät oder in der Nähe des Geräts. • Achten Sie darauf, dass alle Metallobjekte aus der Wäsche entfernt wurden. 2.5 Innenbeleuchtung WARNUNG! Verletzungsgefahr.
DEUTSCH 4. BEDIENFELD 4.1 Bedienfeldbeschreibung 1 2 3 Dampf Glätten Koch/Bunt Dampf Auffrischen Extra Leise Baumwolle Eco Pflegeleicht Super Eco 4 Leichtbügeln 20 Min. - 3 kg Feinwäsche Jeans Flüssig Dosierung Wolle/Seide Spülen Schleudern/ Pumpen Daunen Ein/Aus Anti-Allergie Temp. 11 Taste Ein/Aus (Ein/Aus) Programmwahlschalter Display Taste für Flüssigwaschmittel (Flüssig Dosierung) 5 Taste Start/Pause (Start/Pause) 6 Taste Zeitvorwahl (Zeitvorwahl) 1 2 3 4 U/Min.
www.aeg.com Temperatur des gewählten Programms A Kaltwasser Schleuderdrehzahl des eingestellten Programms B Symbol Kein Schleudern1) Symbol Spülstopp 1) Nur verfügbar für das Programm Schleudern/Abpumpen. Symbole für die Waschphasen Wenn ein Programm eingestellt ist, leuchten alle Symbole für die Phasen des Programms auf. Beim Start des Programms blinkt nur das Symbol der aktuell laufenden Phase. Nach Ende des Programms leuchtet das Symbol der letzten Phase.
DEUTSCH 9 Programmdauer Wenn das Programm beginnt, verringert sich die angezeigte Zeit in Minutenschritten. Zeitvorwahl Wenn Sie die Zeitvorwahl-Taste drücken, zeigt das Display die verbleibende Zeit bis zum Programmstart an. Alarmcodes Bei einer Störung des Geräts erscheinen im Display Alarmcodes. Siehe hierzu „Fehlersuche“. H Diese Meldung erscheint einige Sekunden lang im Display, wenn: • Sie versuchen, eine Funktion einzustellen, die für das gewählte Waschprogramm nicht zur Verfügung steht.
www.aeg.com Das Fleckensymbol leuchtet beim Einschalten der Funktion auf. Das Symbol Vorwäsche erscheint, wenn diese Funktion eingeschaltet ist. L Der Anzeigebalken ist nicht ganz gefüllt, wenn Sie nur eine der Funktionen einstellen. Der Anzeigebalken ist vollständig gefüllt, wenn Sie beide Funktionen einstellen. 5.
DEUTSCH 11 Programm Temperaturbereich Maximale Beladung Maximale Schleuderdrehzahl Programmbeschreibung (Beladung und Verschmutzungsgrad) Schleudern/Pumpen3) 7 kg 1300 U/min Schleudern der Wäsche und Abpumpen des in der Trommel verbliebenen Wassers. Alle Gewebearten, außer Wollwäsche und Feinwäsche. Spülen 4) Kalt 7 kg 1300 U/min Spülen und Schleudern der Wäsche. Alle Gewebearten, außer Wollwäsche und Feinwäsche. Verringern Sie die Schleuderdrehzahl je nach Wäscheart.
www.aeg.com Programm Temperaturbereich Maximale Beladung Maximale Schleuderdrehzahl Programmbeschreibung (Beladung und Verschmutzungsgrad) Dampf Glätten 1 kg Dampfprogramm für pflegeleichte Wäsche. Dieses Programm hilft bei der Beseitigung von Falten in der Wäsche. 1) Um Knitterfalten zu reduzieren, reguliert dieser Waschgang die Wassertemperatur und führt einen schonenden Wasch- und Schleudergang aus. Das Gerät führt zusätzliche Spülgänge aus.
DEUTSCH Flecken/Vorw. 1) Extra Spülen 2) Zeit Sparen 3) Zeitvorwahl Flüssig Dosierung Programm Leichtbügeln ■ ■ ■ ■ ■ ■ ■ Feinwäsche ■ ■ ■ ■ ■ ■ ■ Wolle/Seide ■ ■ ■ ■ Daunen ■ ■ ■ Anti-Allergie ■ ■ ■ Schleudern/Pumpen5) ■ Spülen ■ ■ Jeans ■ ■ 20 Min. - 3 kg ■ Super Eco ■ ■ ■ ■ Baumwolle Eco ■4) ■ ■ ■ ■ 13 ■ ■ ■6) ■ ■ ■ ■ ■ ■ ■ 7) ■ ■ ■ ■ ■ ■ ■ ■ 1) Wenn Sie Flüssigwaschmittel benutzen, wählen Sie ein Programm ohne Vorwäsche.
www.aeg.com 5.1 Woolmark Apparel Care Blau Woolmark auf das Waschen von Wolltextilien mit der Pflegekennzeichnung „Handwäsche“ getestet und zugelassen, vorausgesetzt, dass die Wäsche gemäß der Anleitung auf dem Kleidungsetikett und gemäß den Angaben des Maschinenherstellers gewaschen wird. Beachten Sie die Trocken- und Waschanleitung auf dem Kleidungsetikett. M1145 In Großbritannien, Irland, Hongkong und Indien ist das Woolmark-Symbol ein zertifiziertes Warenzeichen.
DEUTSCH Programme Beladung Energiever(kg) brauch (kWh) 15 Wasserverbrauch (Liter) Ungefähre Programmdauer (in Minuten) Restfeuchte (%)1) Standardprogramm Baumwolle 60 °C 7 0,84 46 241 52 Standardprogramm Baumwolle 60 °C 3.5 0,45 38 180 52 Standardprogramm Baumwolle 40 °C 3.5 0,42 37 182 52 1) Am Ende der Schleuderphase. 2) Für einige Modelle nicht verfügbar. Aus-Zustand (W) Ein-Zustand (W) 0.30 0.
www.aeg.com Wir empfehlen Ihnen, diese Option zum Waschen von stark verschmutzter Wäsche zu verwenden. Durch das Einschalten dieser Option verlängert sich die Programmdauer. 7.4 Extra Spülen Mit dieser Option können Sie einigen Waschprogrammen Spülgänge hinzufügen, siehe „Programmübersicht“. Diese Option empfiehlt sich für Menschen, die unter Waschmittelallergien leiden, und in Gebieten mit weichem Wasser. Die entsprechende Anzeige leuchtet auf. 7.
DEUTSCH 9. REINIGEN SIE VOR DEM ERSTEN GEBRAUCH 1. Geben Sie eine kleine Waschmittelmenge in das Waschmittelfach für die Hauptwäsche. 2. Stellen Sie ein Koch-/BuntwäscheProgramm mit der höchsten Temperatur ein und starten Sie das Programm mit leerer Trommel. So werden alle eventuellen Verunreinigungen aus Trommel und Bottich entfernt. 10. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel "Sicherheitshinweise". 10.1 Einschalten des Geräts 1. Stecken Sie den Netzstecker in die Netzsteckdose. 2.
www.aeg.com 10.4 Waschmittelfächer VORSICHT! Verwenden Sie ausschließlich speziell für Waschmaschinen bestimmte Waschmittel. Halten Sie sich immer an die Anweisungen auf der Verpackung der Waschmittelprodukte. Waschmittelfach für die Vorwäsche. Füllen Sie nicht mehr Waschmittel (Pulver- oder Flüssigwaschmittel) ein als bis zu den Marken MAX. Waschmittelfach für die Hauptwäsche. Füllen Sie nicht mehr Waschmittel (Pulver- oder Flüssigwaschmittel) ein als bis zu den Marken MAX.
DEUTSCH 19 • Position A für Waschpulver (Werkseinstellung). • Position B für Flüssigwaschmittel. Bei Verwendung von Flüssigwaschmitteln: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. • Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Obergrenze. 10.6 Einstellen eines Programms 1. Drehen Sie den Programmwahlschalter. Die entsprechende Programmkontrolllampe leuchtet auf. Die Kontrolllampe der Taste Start/Pause blinkt rot.
www.aeg.com 2. Drücken Sie die Taste Zeitvorwahl wiederholt, bis im Display angezeigt wird. 3. Drücken Sie die Taste Start/Pause erneut, um das Programm sofort zu starten. 10.11 Unterbrechen eines Programms und Ändern einer Option Einige Optionen können nur geändert werden, bevor sie durchgeführt werden. 1. Drücken Sie die Taste Start/Pause. Die zugehörige Kontrolllampe blinkt. 2. Ändern Sie die eingestellte Option. 3. Drücken Sie die Taste Start/Pause erneut. Das Programm wird fortgesetzt. 10.
DEUTSCH Die Kontrolllampe der Taste Start/Pause erlischt. Das Symbol der Deckelverriegelung leuchtet. Der Deckel bleibt verriegelt. 1. Drücken Sie die Taste Ein/Aus, um das Gerät auszuschalten. Fünf Minuten nach Ende des Programms schaltet die Energiesparfunktion das Gerät automatisch aus. Sie müssen das Wasser abpumpen, um den Deckel öffnen zu können: Wenn Sie das Gerät wieder einschalten, sehen Sie im Display das Ende des letzten Programms.
www.aeg.com • Eine sehr geringe Beladung kann in der Schleuderphase Probleme verursachen. Verteilen Sie die Wäschestücke in diesem Fall mit der Hand neu und starten Sie die Schleuderphase erneut. 11.2 Hartnäckige Flecken Für manche Flecken sind Wasser und Waschmittel nicht ausreichend. Wir empfehlen, diese Flecken vorzubehandeln, bevor Sie die entsprechenden Textilien in das Gerät geben. Spezial-Fleckentferner sind im Handel erhältlich.
DEUTSCH 12.2 Entkalkung • Nehmen Sie die Wäsche aus der Trommel. • Wählen Sie ein Programm für Baumwollwäsche mit der maximalen Temperatur und einer kleinen Menge Waschmittel. Wenn die Wasserhärte Ihres Leitungswassers hoch oder mittel ist, empfehlen wir die Verwendung eines Entkalkers für Waschmaschinen. Überprüfen Sie regelmäßig, dass sich kein Kalk und keine Rostpartikel in der Trommel abgesetzt haben. 12.4 Deckeldichtung Überprüfen Sie die Dichtung regelmäßig.
www.aeg.com 12.6 Reinigen der Waschmittelschublade 1. 2. 3. 12.7 Reinigen des Ablauffilters Reinigen Sie den Ablauffilter nicht, wenn das Wasser im Gerät heiß ist. 1. 2.
DEUTSCH 3. 4. 5. 12.8 Reinigen des Siebs des Zulaufschlauchs und Ventils 1. 2.
www.aeg.com 3. 4. 90˚ 12.9 Notentleerung Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen. In diesem Fall führen Sie die Schritte (1) bis (5) unter „Reinigen des Ablauffilters“ durch. Reinigen Sie bei Bedarf die Pumpe. 3. Stecken Sie die beiden Enden des Zulaufschlauchs in einen Behälter und lassen Sie das Wasser aus dem Schlauch fließen. 4. Leeren Sie die Ablaufpumpe. Siehe Notentleerungsverfahren. 5.
DEUTSCH zu. Wenden Sie sich an den autorisierten Kundendienst. 27 WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen. 13.2 Mögliche Störungen Störung Mögliche Abhilfe Das Programm startet nicht. Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist. Achten Sie darauf, dass der Gerätedeckel und die Trommeltüren ordnungsgemäß geschlossen sind. Vergewissern Sie sich, dass im Sicherungskasten keine Sicherung ausgelöst hat.
www.aeg.com Störung Mögliche Abhilfe Vergewissern Sie sich, dass das Ablaufsieb nicht verstopft ist. Reinigen Sie ggf. das Sieb. Siehe „Reinigung und Pflege“. Vergewissern Sie sich, dass der Wasserablaufschlauch ordnungsgemäß angebracht ist. Haben Sie ein Programm ohne Abpumpphase gewählt, stellen Sie das Abpumpprogramm ein. Haben Sie ein Programm mit Spülstopp gewählt, stellen Sie das Abpumpprogramm ein. Das Gerät schleudert nicht oder das Waschprogramm dauert länger als gewöhnlich.
DEUTSCH 29 Störung Mögliche Abhilfe Das Programm ist länger als die angezeigte Zeit. Wenn die Wäsche ungleich in der Trommel verteilt ist, verlängert sich die Programmdauer. Dies ist ein normales Verhalten des Geräts. Die Waschergebnisse sind nicht zufriedenstellend. Erhöhen Sie die Waschmittelmenge oder benutzen Sie ein anderes Waschmittel. Entfernen Sie vor dem Waschgang hartnäckige Flecken mit einem Spezialprodukt. Achten Sie darauf, die richtige Temperatur einzustellen.
www.aeg.com Schleuderdrehzahl Höchstwert 1300 U/min 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 15. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie * Geräte mit diesem Symbol nicht mit dem Hausmüll.
DEUTSCH 31
192952150-A-322016 www.aeg.