EN User Manual Washing Machine L89495FL2
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 6 4. CONTROL PANEL...........................................................................................................7 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
ENGLISH • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • This appliance complies with the E.E.C. Directives. 2.3 Water connection • Do not cause damage to the water hoses. • Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear. • Ensure that there are no visible water leaks during and after the first use of the appliance. 2.
www.aeg.com 3. PRODUCT DESCRIPTION 3.1 Appliance overview 1 2 3 4 1 2 3 4 5 6 7 Worktop Detergent dispenser Control panel Door handle Rating plate Drain pump filter Feet for levelling the appliance 5 6 7 3.2 How to activate the child safety device To close the door, turn the device anticlockwise until the groove is vertical. This device prevents children or pets from being closed in the drum. 3.3 Fixing plate kit (4055171146) Turn the device clockwise, until the groove is horizontal.
ENGLISH 4. CONTROL PANEL 4.1 Control panel description 1 2 3 Anticrease Cottons Refresh Cottons Eco Super Eco 30° Synthetics 20 Min. - 3 kg Delicates Extra Silent Easy Iron Jeans Wool/Silk Duvet Rinse Spin/ Drain / Anti-Allergy Auto Off Temp.
www.aeg.com Temperature of the set programme A Cold water Spin speed of the set programme B No Spin symbol1) Rinse hold symbol 1) Only available for SPIN/DRAIN programme. The phase symbols When a programme is set, all the symbols of the phases related to the programme come on. When the programme starts, only the symbol of the phase in operation flashes. When the programme is completed, the symbol of the last phase is on.
ENGLISH 9 Programme time When the programme starts, the programme time decreases with steps of 1 minute. Delay start When you press the delay start button, the display shows the delay start time Alarm codes If the appliance has a malfunction, the display shows alarm codes. Refer to «Troubleshooting». H The display shows this message for some seconds when: • you cannot set a function with the washing programme • you try to change the washing programme while it operates. When the programme is completed.
www.aeg.com the Stain symbol comes on when you activate the function. The Prewash symbol comes on when this function is activated. L The indicator bar is not fully filled when you set only one of the functions. The indicator bar is fully filled when you set the two functions. 5. PROGRAMMES 5.1 Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 9 kg 1400 rpm White cotton and coloured cotton. Normal soil and light soil.
ENGLISH Programme Temperature range 11 Maximum load Maximum spin speed Programme description (Type of load and soil level) 9 kg 1400 rpm White cotton items. This programme removes micro-organisms thanks to the washing by 60°C and adds one rinse. In this way the wash is more effective. 9 kg 1400 rpm To spin the laundry and to drain the water in the drum. All fabrics, except woollens and delicate fabrics. 9 kg 1400 rpm To rinse and spin the laundry.
www.aeg.com Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 1.5 kg Steam programme for synthetic items. This cycle helps to dewrinkle the laundry. Anticrease 1) To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin phase. The appliance adds some rinses. 2) During this cycle the drum rotates slowly to ensure a gentle wash.
ENGLISH 13 ■ Delay Start ■ Time Save 3) ■ Extra Rinse 2) ■ Stains/Prewash1) Spin Programme ■ ■ ■ ■ Delicates Wool/Silk Duvet ■ ■ ■ ■ ■ ■ ■ ■ Anti-Allergy Spin/Drain5) Rinse Cold Jeans ■ ■ ■ ■ ■ ■ ■ 20 min.-3Kg ■ Super Eco 30° ■ ■ ■ ■ Cottons Eco ■ ■ 4) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■6) ■ 1) If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a temperature lower than 40°C.
www.aeg.com 5.2 Woolmark Apparel Care Green Company for the washing of wool garments labelled as «hand wash» provided that the garments are washed according to the instructions issued by the manufacturer of this washing machine. Follow the garment care label for drying and other laundry instructions. M1361 In UK, Eire, Hong Kong and India the Woolmark symbol is a certification trademark. The wool wash cycle of this machine has been approved by The Woolmark 6.
ENGLISH Programmes Load (kg) Energy con- Water consumption sumption (kWh) (litre) Standard 60°C cotton Standard 60°C cotton Standard 40°C cotton 15 ApproxiRemaining mate promoisture gramme du- (%)1) ration (minutes) 9 0.64 57 226 52 4.5 0.34 41 185 52 4.5 0.34 40 199 52 1) At the end of spin phase. 2) Not available for some models. Off Mode (W) Left On Mode (W) 0.05 0.
www.aeg.com This option is not available with a temperature lower than 40° C. • Prewash: Use this option to add a prewash phase before the washing phase. We recommend that you use this option when you have very soiled laundry. This option increases the programme duration. • Deactivate the spin phase. • Activate the Rinse Hold option. Set this option to prevent fabrics from creasing. The washing programme ends with water in the drum. The drum turns regularly to reduce creasing. The door stays locked.
ENGLISH 2. Set and start a programme for cotton at the highest temperature without laundry. 17 This removes all possible dirt from the drum and the tub. 10. DAILY USE WARNING! Refer to Safety chapters. 10.3 Filling the detergent and additives 10.1 Activating the appliance 1. Connect the mains plug to the mains socket. 2. Open the water tap. 3. Press button Auto Off to activate the appliance. A short tune sounds. 10.2 Loading the laundry 1. Open the appliance door 2.
www.aeg.com 1 2 3. To use powder detergent, turn the flap up. A With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit shown on in the flap. • Do not set the prewash phase. • Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. 10.5 Setting a programme 4.
ENGLISH 10.7 Starting a programme with the delay start 1. Press button Delay Start again and again until the display shows the number of minutes or hours of delay. The related indicator comes on. 2. Press button Start/Pause. The appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button Start/Pause to start the appliance, you can cancel or change the set of the delay start. 10.
www.aeg.com After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle. 2. Remove the laundry from the appliance. 3. Make sure that the drum is empty. 4. Keep the door ajar, to prevent mildew and odours 10.
ENGLISH small and/or delicate items (e.g. underwired bras, belts, tights, etc. ). • A very small load can cause balance problems with the spin phase. If this occurs, adjust manually the items in the tub and start the spin phase again. 11.2 Stubborn stains For some stains, water and detergent is not sufficient. We recommend that you pre-treat these stains before you put the items in the appliance. Special stain removers are available.
www.aeg.com Regularly examine the seal and remove all objects from the inner part. Always obey the instructions that you find on the packaging of the product. 12.5 Cleaning the drum 12.3 Maintenance wash Regularly examine the drum to prevent limescale and rust particles. Only use special products to remove rust particles from the drum. With the low temperature programmes it is possible that some detergent stays in the drum. Perform a maintenance wash regularly.
ENGLISH 12.7 Cleaning the drain filter Do not clean the drain filter if the water in the appliance is hot. 1. 2. 2 1 1 2 1 3. 4. 1 5. 6.
www.aeg.com 7. 8. 1 2 9. 2 1 12.8 Cleaning the inlet hose and the valve filter 1. 2.
ENGLISH 3. 25 4. 45° 20° 12.9 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2.
www.aeg.com the water tap. Contact the Authorised Service Centre. WARNING! Deactivate the appliance before you do the checks. 13.2 Possible failures Problem Possible solution The programme does not start. Make sure that the mains plug is connected to the mains socket. Make sure that the appliance door is closed. Make sure that there is not a damaged fuse in the fuse box. Make sure that the Start/Pause has been pressed. If the delay start is set, cancel the setting or wait for the end of countdown.
ENGLISH Problem Possible solution The spin phase does not operate or the washing cycle lasts longer than usually. Set the spin programme. 27 Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. There is water on the floor. Make sure that the couplings of the water hoses are tight and there is not water leakages.
www.aeg.com After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. 14. EMERGENCY DOOR OPENING In case of power failure or functioning failure the appliance door remains locked. The washing programme continues when the power is restored.
ENGLISH Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressure 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Minimum Maximum Cold water Water supply 1) Maximum Load Cotton 9 kg Energy Efficiency Class Spin Speed 29 A+++ Maximum 1400 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 16.
www.aeg.
ENGLISH 31
132941400-A-502015 www.aeg.
