L8FEC68S USER MANUAL RO Manual de utilizare Maşină de spălat rufe
www.aeg.com CUPRINS 1. INFORMAŢII PRIVIND SIGURANŢA....................................................................3 2. INSTRUCŢIUNI DE SIGURANŢĂ.........................................................................4 3. INSTALAREA........................................................................................................6 4. DESCRIEREA PRODUSULUI............................................................................ 10 5. PANOUL DE COMANDĂ.........................................
ROMÂNA 1. 3 INFORMAŢII PRIVIND SIGURANŢA Înainte de instalarea şi de utilizarea aparatului, citiţi cu atenţie instrucţiunile furnizate. Producătorul nu este responsabil pentru nicio vătămare sau daună rezultată din instalarea sau utilizarea incorectă. Păstraţi permanent instrucţiunile într-un loc sigur şi accesibil pentru o consultare ulterioară. 1.
www.aeg.com • • • • • • • • Presiunea de alimentare cu apă din punctul de racord la reţeaua de apă trebuie să fie între 0,5 bar (0,05 MPa) şi 8 bar (0,8 MPa). Fanta de aerisire din bază (dacă este cazul) nu trebuie să fie blocate de mochetă, covor sau orice alt material folosit la acoperirea pardoselii. Aparatul trebuie conectat la reţeaua de apă folosind noile seturi de furtunuri furnizate sau alte noi seturi de furtunuri furnizate de Centrul de service autorizat.
ROMÂNA • • • • • • • • Utilizaţi întotdeauna o priză cu protecţie (împământare) contra electrocutării, montată corect. Verificaţi dacă informaţiile de natură electrică, specificate pe plăcuţa cu datele tehnice, corespund cu cele ale sursei de tensiune. În caz contrar, contactaţi un electrician. Nu folosiţi prize multiple şi cabluri prelungitoare. Procedaţi cu atenţie pentru a nu deteriora ştecherul şi cablul de alimentare electrică.
www.aeg.com 3. INSTALAREA AVERTISMENT! Consultaţi capitolele privind siguranţa. 3.1 Despachetarea AVERTISMENT! Înainte de instalarea aparatului, îndepărtaţi toate ambalajele şi şuruburile de transport. AVERTISMENT! Utilizaţi mănuşile. 4. Deschideţi uşa şi scoateţi bucata de polistiren din garnitura uşii şi toate obiectele din tambur. 1. Îndepărtaţi folia exterioară. Dacă este nevoie folosiţi un cutter. 2. Scoateţi capacul de carton şi materialele din polistiren folosite la ambalare. 3.
ROMÂNA x4 1 A 2 8. Curăţaţi bine şi uscaţi partea inferioară a aparatului. ATENŢIE! Nu folosiţi alcool, solvenţi sau produse chimice. 9. Identificaţi diferitele dimensiuni şi poziţii ale barierelor acustice. Consultaţi imaginea: B Prindeţi barierele acustice la temperatura camerei. 13. Ridicaţi aparatul în poziţie verticală. 14. Scoateţi cablul de alimentare electrică şi furtunul de evacuare din suporturi.
www.aeg.com 16. Trageţi în afară distanţierele din plastic. 17. Puneţi capacele din plastic, găsite în punga cu manualul utilizatorului, în găuri. x4 Aparatul trebuie să fie orizontal şi stabil. Reglarea corectă a aparatului pe orizontală previne vibraţiile, zgomotul şi deplasarea aparatului în timpul funcţionării. Recomandăm păstrarea ambalajelor şi a şuruburilor de transport pentru orice mutare a aparatului. 3.2 Amplasarea şi aducerea la nivel 1. Instalaţi aparatul pe o podea plată, tare.
ROMÂNA 9 Sectorul roşu din fereastra «A» indică această defecţiune. 45 20 O O Nu puneţi furtunul de alimentare în poziţie verticală. 3. Dacă este necesar, slăbiţi piuliţa pentru a-l poziţiona corect. 4. Racordaţi furtunul de alimentare la un robinet de apă rece cu filet de 3/4". ATENŢIE! Verificaţi dacă există scurgeri la racorduri. Nu folosiţi un furtun prelungitor dacă furtunul de alimentare este prea scurt. Adresaţi-vă centrului de service pentru înlocuirea furtunului de alimentare. 3.
www.aeg.com Capătul furtunului de evacuare nu trebuie să fie scufundat în apă. Se poate produce o refulare cu apă murdară în aparat. 3. La o conductă fixă cu aerisire Introduceţi furtunul de evacuare direct în conducta de canalizare. Consultaţi imaginea. Capătul furtunului de evacuare trebuie să fie întotdeauna aerisit, adică diametrul interior al ţevii de evacuare (min. 38 mm - min. 1,5") trebuie să fie mai mare decât diametrul exterior al furtunului de evacuare. 4.
ROMÂNA • • Tehnologia ProSense detectează cantitatea de rufe stabilind durata programului în 30 de secunde. Programul de spălare este adaptat la încărcătura de rufe şi tipul ţesăturii fără a consuma mai mult timp, energie şi apă decât este necesar. Aburul ca o modalitate rapidă şi uşoară de a împrospăta hainele. Programele delicate cu abur elimină mirosurile şi reduc şifonarea ţesăturilor uscate, care necesită astfel doar o călcare uşoară.
www.aeg.com 5. PANOUL DE COMANDĂ 5.
ROMÂNA 13 5.2 Afişaj MIX Indicator încărcătură maximă. Pictograma clipeşte în timpul estimării încărcăturii de rufe (consultaţi paragraful „Detectarea încărcăturii cu PROSENSE”). Indicator cantitate maximă de rufe. Acesta clipeşte când încărcătura de rufe depăşeşte încărcătura maximă declarată pentru programul selectat. Indicator pentru pornirea cu întârziere. Indicator pentru uşă blocată. Indicatorul digital poate prezenta: • Durata programului (de ex. • Durata întârzierii (de ex.
www.aeg.com Indicatorul pentru dispozitivul de siguranţă pentru copii. Indicatorul pentru economisirea timpului. Indicatorul pentru temperatură. Indicatorul setată o spălare cu apă rece. apare atunci când este Indicatorul pentru viteza de centrifugare. Indicatorul pentru clătire oprită. Indicatorul pentru super silenţios. Indicatorul pre-spălare. Indicatorul pentru pete. Indicatorul pentru clătire suplimentară. 6. BUTOANELE ROTATIVE ŞI CELE SIMPLE 6.1 Pornit/Oprit 6.
ROMÂNA termină cu apă în tambur şi faza finală de centrifugare nu este realizată. • Pe afişaj apare indicatorul . Tamburul se învârteşte regulat pentru a reduce şifonarea. Uşa rămâne blocată. Tamburul se învârteşte regulat pentru a reduce şifonarea. Trebuie să evacuaţi apa pentru a debloca uşa. Atingeţi butonul Start/Pauză: aparatul realizează faza de centrifugare şi evacuează apa. Activaţi opţiunea Super silenţios.
www.aeg.com Indicatorul clipeşte pe afişaj în timpul fazei cu abur. Această opţiune creşte uşor durata programului. • Pe afişaj apare indicatorul indică un zero , indicatorul este O încărcătură mică de rufe ajută la obţinerea unor rezultate mai bune. 6.10 Buton pentru omiterea fazei (Opţiune) Prin atingerea acestui buton puteţi seta: • Doar clătire la prima atingere. Programul de spălare începe de la faza de clătire, sărind peste faza de spălare. 6.
ROMÂNA 17 7. PROGRAME 7.1 Tabelul programelor Programe de spălare Program Descriere program Programe de spălare Bumbac Bumbac alb şi colorat. Nivel mediu şi redus de murdărie. Programe standard pentru valorile de consum din eticheta energetică. Conform reglementării 1061/2010, programul Bumbac la 60°C şi programul Bumbac la 40°C cu opţiunea sunt «Programul standard la 60°C pentru rufe din bum‐ bac» şi, respectiv, «Programul standard la 40°C pentru rufe din bumbac».
www.aeg.com Program OKOPower Anti-Alergic 20 min. - 3 kg Outdoor Descriere program Bumbac şi articole sintetice în culori rezistente. Program complet de spălare care, în doar 59 de minute, spală intensiv rufele murdărite zilnic şi asigură performanţe bune la spălare într-un timp scurt. Articole din bumbac alb. Acest program elimină micro-orga‐ nismele datorită unei faze de spălare cu temperatura menţi‐ nută la peste 60°C timp de câteva minute.
ROMÂNA Temperatura programului, viteza maximă de centrifugare şi încărcătura maximă Program Temperatura impli‐ cită Interval pentru tem‐ peratură Viteză maximă de centrifugare Valori pentru viteza de centrifugare Bumbac 40°C 95°C - Rece 1600 rpm 1600 rpm - 400 rpm 8 kg Sintetice 40°C 60°C - Rece 1200 rpm 1200 rpm - 400 rpm 3 kg Delicate 40°C 40°C - Rece 1200 rpm 1200 rpm - 400 rpm 3 kg Lână/Mătase 40°C 40°C - Rece 1200 rpm 1200 rpm - 400 rpm 1.5 kg - - 1.
www.aeg.com ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Pete1) ■ ■ ■ ■ ■ Prespălare ■ ■ ■ ■ ■ Clătire suplimen‐ tară ■ ■ ■ ■ ■ ■ ■ ■ Economie timp 3) ■ ■ ■ Doar clătire ■ ■ ■ ■ ■ ■ ■ ■ ■ Doar centrifugare ■ ■ ■ ■ ■ ■ ■ ■ ■ Doar evacuare ■ ■ ■ ■ ■ ■ ■ ■ ■ Pornire cu întâr‐ ziere ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Economisirea energiei 2) Abur plus 1) Soft Plus ■ ■ Blugi ■ Outdoor Anti-Alergic ■ 20 min.
ROMÂNA 7.2 Woolmark Apparel Care Verde 21 Company pentru spălarea articolelor de îmbrăcăminte din lână care sunt etichetate cu „spălare manuală”, cu condiţia ca articolele să fie spălate în conformitate cu instrucţiunile producătorului acestei maşini de spălat rufe. Respectaţi instrucţiunile de îngrijire de pe eticheta produsului referitoare la uscare şi alte tratamente. M1636 În Regatul Unit, Irlanda, Hong Kong şi India simbolul Woolmark este o marcă comercială de certificare.
www.aeg.com Dacă dezactivaţi semnalele acustice, acestea continuă să funcţioneze atunci când aparatul are o defecţiune. 9.3 Clătirea suplimentară permanentă Cu această opţiune puteţi avea permanent o clătire suplimentară atunci când setaţi un program care permite această selecţie. • Pentru a activa/dezactiva această opţiune, atingeţi simultan butonul şi până când indicatorul relevant se aprinde/se stinge. Această opţiune adaugă două clătiri şi afişajul indică 9.
ROMÂNA 10.3 Umplerea cu detergent şi aditivi 23 1 2 3. Pentru a utiliza detergent pudră, rotiţi clapeta în sus. Compartiment pentru faza de prespălare, program de înmuiere sau agent de îndepărtare a petelor. Compartiment pentru faza de spălare. Compartiment pentru aditivi lichizi (balsam de rufe, apret). Nivel maxim pentru cantitatea de aditivi lichizi. Clapetă pentru detergent pudră sau lichid.
www.aeg.com Cu clapeta în poziţia de JOS: • Nu utilizaţi detergenţi lichizi denşi sau gelatinoşi. • Nu adăugaţi mai mult detergent lichid decât limita indicată pe clapetă. • Nu selectaţi faza de prespălare. • Nu selectaţi funcţia de pornire cu întârziere. 5. Măsuraţi cantitatea de detergent şi de balsam de rufe. 6. Închideţi cu atenţie dozatorul pentru detergent. informaţiile prezentate se schimbă corespunzător.
ROMÂNA 2. Atingeţi butonul Pornire cu întârziere în mod repetat până când afişajul indică . 3. Pentru a porni programul imediat, atingeţi din nou butonul Start/Pauză. Modificarea pornirii cu întârziere după începerea numărătorii inverse Pentru a modifica pornirea cu întârziere: 1. Atingeţi butonul Start/Pauză pentru pune aparatul în pauză. Indicatorul aferent se aprinde intermitent. 2. Atingeţi butonul Pornire cu întârziere în mod repetat până când afişajul indică întârzierea dorită. 3.
www.aeg.com Faza cu abur este în desfăşurare: . Faza anti-şifonare este în desfăşurare: . 10.10 Întreruperea unui program şi modificarea opţiunilor Când programul este în desfăşurare puteţi modifica doar unele opţiuni: În timpul funcţionării unui program sau a pornirii cu întârziere, uşa aparatului este blocată. 1. Atingeţi butonul Start/Pauză. Pe afişaj se stinge indicatorul corespunzător pentru uşă blocată. 2. Deschideţi uşa aparatului. Dacă este necesar, adăugaţi sau eliminaţi articole. 3.
ROMÂNA 10.14 Evacuarea apei după terminarea ciclului Dacă aţi ales un program sau o opţiune care nu goleşte apa de la ultima clătire, programul este finalizat, însă: • Afişajul prezintă indicatorul , indicatorul opţiunii sau şi . indicatorul pentru uşă blocată Indicatorul fazei aflate în desfăşurare • • • se aprinde intermitent. Tamburul încă se roteşte la intervale regulate pentru a preveni şifonarea rufelor. Uşa rămâne blocată. Trebuie să evacuaţi apa pentru a deschide uşa: 4.
www.aeg.com • pentru a spăla articolele mici şi/sau delicate (de ex. sutiene fără sârmă, curele, colanţi, etc.). O încărcătură foarte mică poate provoca probleme de echilibru în timpul fazei de centrifugare cauzând o vibrare excesivă. Dacă se întâmplă acest lucru: a. întrerupeţi programul şi deschideţi uşa (consultaţi „Deschiderea uşii atunci când funcţionează un program sau pornirea cu întârziere”); b. redistribuiţi manual încărcătura pentru ca articolele să fie aşezate uniform prin cuvă; c.
ROMÂNA ATENŢIE! Nu folosiţi alcool, solvenţi sau produse chimice. 29 12.4 Garnitura uşii ATENŢIE! Nu curăţaţi suprafeţele metalice cu detergent pe bază de clor. 12.2 Decalcifiere Dacă apa din zona în care vă aflaţi are o duritate ridicată sau medie, recomandăm utilizarea unui produs de decalcifiere a apei pentru maşini de spălat. Examinaţi regulat tamburul pentru a verifica dacă există depuneri de calcar.
www.aeg.com 2. Scoateţi partea superioară a compartimentului pentru aditivi pentru a ajuta la curăţenie şi puneţi sub un jet de apă caldă pentru a îndepărta toate resturile de detergent care s-au acumulat. După curăţare, puneţi la loc partea de sus. 12.7 Curăţarea pompei de evacuare AVERTISMENT! Scoateţi ştecherul din priză. Verificaţi regulat filtrul pompei de evacuare pentru vă asigura că este curat. Curăţaţi pompa de evacuare dacă: • Aparatul nu evacuează apa. • Tamburul nu se roteşte.
ROMÂNA 31 2 1 1 2 4. Lăsaţi să curgă apa. 1 8. Dacă este necesar, scoateţi scamele şi obiectele din adâncitura filtrului. 9. Asiguraţi-vă că elicea pompei se poate roti. Dacă nu se roteşte, adresaţi-vă Centrului de service autorizat. 5. Atunci când vasul se umple cu apă, puneţi conducta de evacuare la loc şi goliţi recipientul. 6. Repetaţi paşii 4 şi 5 până când nu mai curge apă. 10. Curăţaţi filtrul sub jet de apă. 2 1 7.
www.aeg.com 1 2 1 2 3 2. Desfaceţi furtunul de alimentare de la aparat prin slăbirea piuliţei. 12. Închideţi accesul la pompă. 2 1 Atunci când evacuaţi apa prin procedura de evacuare de urgenţă, trebuie să activaţi din nou sistemul de evacuare: a. Turnaţi 2 litri de apă în compartimentul principal de spălare al dozatorului pentru detergent. b. Porniţi programul pentru a evacua apa. 3. Curăţaţi cu o periuţă de dinţi filtrul supapei din spatele aparatului. 12.
ROMÂNA 33 0°C sau mai jos, eliminaţi apa rămasă în furtunul de alimentare şi din pompa de evacuare. 45° 20° 12.9 Evacuarea de urgenţă 1. Scoateţi ştecherul din priză. 2. Închideţi robinetul de apă. 3. Puneţi cele două capete ale furtunului de alimentare într-un recipient şi lăsaţi apa să se scurgă din furtun. 4. Goliţi pompa de evacuare. Consultaţi procedura de evacuare de urgenţă. 5. Când pompa de drenare este goală, montaţi la loc furtunul de alimentare cu apă.
www.aeg.com • - Nu există comunicare între elementele electronice ale aparatului. Opriţi-l şi porniţi-l din nou. • - Dispozitivul anti-inundaţie este pornit. Deconectaţi aparatul şi închideţi robinetul de apă. Contactaţi Centrul de service autorizat. AVERTISMENT! Dezactivaţi aparatul înainte de a efectua orice verificare. • - Sursa de alimentare nu este stabilă. Aşteptaţi stabilizarea sursei de alimentare. 13.2 Defectări posibile Problemă Soluţie posibilă Programul nu porneşte.
ROMÂNA Problemă 35 Soluţie posibilă Verificaţi dacă furtunul de evacuare este răsucit sau îndoit. Verificaţi dacă filtrul de evacuare este înfundat. Dacă este ne‐ cesar, curăţaţi filtrul. Consultaţi capitolul „Îngrijirea şi curăţa‐ rea”. Verificaţi dacă racordul furtunului de evacuare este realizat co‐ rect. Setaţi un program de evacuare dacă aţi setat un program fără faza de evacuare. Setaţi un program de evacuare dacă aţi setat o opţiune care se termină cu apă în cuvă.
www.aeg.com Problemă Soluţie posibilă Durata programului creş‐ Funcţia ProSense poate ajusta durata programului în funcţie te sau scade în timpul de tipul şi cantitatea de rufe. Consultaţi „Detectarea încărcăturii executării programului. ProSense” din capitolul „Utilizarea zilnică”. Rezultatele la spălare nu sunt satisfăcătoare. Măriţi cantitatea de detergent sau folosiţi un alt detergent. Folosiţi produse speciale pentru a îndepărta petele persistente înainte de a spăla rufele.
ROMÂNA 4. Trageţi în jos de dispozitivul de deblocare şi, simultan, deschideţi uşa aparatului. 37 5. Scoateţi rufele, după care închideţi uşa aparatului. 6. Închideţi clapeta filtrului. 14. VALORI DE CONSUM Datele din acest tabel sunt aproximative. Mai multe variabile pot afecta datele: cantitatea şi tipul de rufe, apa şi temperatura mediului ambiant. În timpul programului de spălare, tehnologia Prosense poate varia dura‐ ta spălării şi valorile de consum.
www.aeg.com Programe Încărcă Consum tură de ener‐ (kg) gie (kWh) Standard 40°C pentru bum‐ bac 4 Consum Durata de apă (li‐ aproxima‐ tri) tivă a pro‐ gramului (minute) 0.35 45 168 Grad de umezeală rema‐ nentă (%)1) 44 1) La finalul fazei de centrifugare. Modul Oprit (W) Modul Inactiv (W) 0.30 0.30 Informaţiile oferite în tabelul de mai sus sunt conforme cu reglementarea Comisiei UE 1015/2010 de implementare a directivei 2009/125/CE 15.
ROMÂNA Nume distribuitor Electrolux Lehel Kft 1142 Budapesta Erzsébet kir.
www.aeg.com 16.3 Setul de suprapunere AVERTISMENT! Nu puneţi uscătorul cu tambur rotativ sub maşina de spălat rufe. 16.4 Piedestalul cu sertar Uscătorul cu tambur rotativ poate fi pus peste maşina de spălat rufe doar dacă folosiţi setul corect de suprapunere produs şi aprobat de AEG. Verificaţi compatibilitatea setului de suprapunere verificând adâncimea aparatelor dvs. Pentru a ridica aparatul dvs. şi pentru a uşura încărcarea şi descărcarea rufelor.
ROMÂNA 41
www.aeg.
ROMÂNA 43
157002332-A-482016 www.aeg.