L8FER842E USER MANUAL FR Notice d'utilisation Lave-linge
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................3 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. INSTALLATION............................................................................................................6 4. ACCESSOIRES........................................................................................................... 11 5.
FRANÇAIS 3 Sous réserve de modifications. 1. INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com 1.2 Sécurité générale • • • • • • • • • • • • Ne modifiez pas les caractéristiques de cet appareil. Cet appareil est conçu uniquement pour un usage domestique et des situations telles que : – dans des cuisines réservées aux employés dans des magasins, bureaux et autres lieux de travail ; – pour une utilisation privée, par les clients, dans des hôtels et autres lieux de séjour ; – dans les parties communes d'immeubles d'appartements, ou dans les laveries automatiques.
FRANÇAIS 5 agréé par AEG (pour plus d'informations, reportezvous au chapitre « Accessoires - Kit de superposition »). 2. CONSIGNES DE SÉCURITÉ 2.1 Installation L'installation doit être confirme aux réglementations nationales en vigueur. • Retirez l'intégralité de l'emballage et les boulons de transport, y compris le joint en caoutchouc et l'entretoise en plastique. • Conservez les boulons de transport en lieu sûr.
www.aeg.com 2.3 Raccordement à l'arrivée d'eau • Veillez à ne pas endommager les tuyaux de circulation d'eau. • Avant d'installer des tuyaux neufs, des tuyaux n'ayant pas servi depuis longtemps, lorsqu'une réparation a été effectuée ou qu'un nouveau dispositif a été installé (compteurs d'eau, etc.), laissez l'eau s'écouler jusqu'à ce qu'elle soit parfaitement propre et claire. • Pendant et après la première utilisation de l'appareil, vérifiez qu'aucune fuite n'est visible.
FRANÇAIS 7 AVERTISSEMENT! Servez-vous de gants. 1. Retirez le film externe. Si nécessaire, utilisez un cutter. 5. Couchez doucement l'appareil sur le dos. 6. Placez le bloc en polystyrène de l'avant au sol, sous l'appareil. 2. Retirez la partie supérieure en carton et tous les matériaux d'emballage en polystyrène. 3. Retirez le film interne. Assurez-vous de ne pas endommager les tuyaux. 7. Retirez la protection en polystyrène en bas de l'appareil. 1 2 4.
www.aeg.com 9. Retirez le câble d'alimentation électrique et le tuyau de vidange de leurs supports. Il est possible de voir de l'eau s'écouler du tuyau d'évacuation. Cette eau provient des tests effectués sur l'appareil en usine. Nous vous recommandons de conserver l'emballage et les boulons de transport en vue d'un éventuel déplacement de l'appareil. 3.2 Positionnement et mise de niveau 1. Placez l'appareil sur un sol plat et dur.
FRANÇAIS L'appareil doit être de niveau et stable. Une mise de niveau correcte évite les vibrations, le bruit ou des déplacements de l'appareil au cours de son fonctionnement. Lorsque la machine est installée sur un socle, ou si une lavante-séchante est placée au-dessus du lavelinge, utilisez les accessoires indiqués dans le chapitre « Accessoires ». Lisez attentivement les notices fournies avec l'appareil et avec l'accessoire. 9 3. Si nécessaire, desserrez la bague de serrage pour bien le positionner.
www.aeg.com 3.5 Vidange de l'eau Le tuyau de vidange doit être installé à une hauteur du sol comprise entre 60 et 100 cm. conduite d'évacuation. Reportezvous à l'illustration. La longueur maximale du tuyau de vidange est de 400 cm. Contactez le service après-vente agréé pour obtenir d'autres longueurs de tuyaux de vidange et des rallonges. Il est possible de raccorder le tuyau de vidange de différentes façons : 1.
FRANÇAIS 11 Veillez à ce que le tuyau de vidange fasse une boucle afin d'éviter que des particules passent de l'évier à l'appareil. 6. Placez le tuyau directement dans une conduite de vidange murale intégrée et serrez-le avec une attache. 4. ACCESSOIRES 4.1 Disponible sur www.aeg.com/shop ou chez un revendeur agréé Seuls les accessoires appropriés et agréés par AEG peuvent répondre aux normes de sécurité de l'appareil. Si les pièces ne sont pas agréées, toute réclamation sera refusée. 4.
www.aeg.com 5. DESCRIPTION DE L'APPAREIL 5.1 Caractéristiques spéciales Votre nouveau lave-linge répond à toutes les exigences modernes pour un traitement du linge efficace et respectueux, en réduisant la consommation d'eau, d'énergie et de produit de lavage. • La technologie Oko-Mix a été conçue pour protéger les fibres des tissus grâce aux différentes phases de pré-mélange qui dissolvent d'abord le produit de lavage puis l'assouplissant dans l'eau avant de les libérer dans le linge.
FRANÇAIS 10 Câble d'alimentation électrique 11 Boulons de transport 13 12 Support du tuyau 6. BANDEAU DE COMMANDE 6.
www.aeg.com 6.2 Affichage MIX Voyant de charge maximale. Le voyant clignote lors de l'estimation de la charge de linge (consultez le paragraphe « Détection de la charge ProSense »). Voyant de charge maximale. Il clignote si la charge de linge dépasse la charge déclarée. Voyant Hublot verrouillé. Indicateur Départ différé. L'indicateur numérique peut afficher : • La durée du programme (par ex. • Le départ différé (par ex. ou ). ). • La fin du cycle ( ). • Un code d'alarme (par ex. ).
FRANÇAIS 15 Voyants d'économies d'énergie. Le voyant apparaît en sélectionnant un programme pour le coton à 40 °C ou 60 °C. Voyant Gain de temps. Indicateur de vitesse d'essorage. Voyant Arrêt cuve pleine. Indicateur Extra silence. Indicateur de température. Le voyant tionnez un lavage à froid. apparaît lorsque vous sélec- 7. MANETTES ET TOUCHES 7.1 Marche/Arrêt 7.3 Temp. Appuyez sur cette touche pendant quelques secondes pour allumer et éteindre l'appareil.
www.aeg.com éviter que le linge ne se froisse. Vous devez vidanger l'eau pour pouvoir ouvrir le hublot. Si vous appuyez sur la touche Départ/ Pause, l'appareil effectue une phase d'essorage et vidange l'eau. L'appareil vidange l'eau automatiquement au bout d'environ 18 heures. • Activer l'option Extra Silence. Les phases d'essorage intermédiaire et final sont supprimées et le programme se termine avec de l'eau dans le tambour. Cela réduit le froissage du linge. L'indicateur s'allume sur l'affichage.
FRANÇAIS 7.6 Vapeur Plus Cette option ajoute une phase vapeur, suivie par une courte phase antifroissage à la fin du programme de lavage. La phase vapeur réduit les plis sur le linge et facilite son repassage. clignote sur l'affichage L'indicateur durant la phase vapeur. Cette option peut rallonger la durée du programme. Lorsque le programme s'arrête, un zéro s'affiche , le voyant est fixe et le commence à clignoter.
www.aeg.com Si vous sélectionnez le programme Coton à 40 °C ou 60 °C et qu'une autre option n'est sélectionnée, l'indicateur s'affiche ; il s'agit des programmes standard pour le coton, les plus efficaces en termes de consommations d'eau et d'énergie combinées. 7.11 Départ/Pause Appuyez sur la touche Départ/Pause pour démarrer l'appareil, le mettre en pause ou interrompre un programme en cours. 8. PROGRAMMES 8.
FRANÇAIS Programme 19 Description du programme Programme vapeur pour les articles en coton et textiles Vapeur synthétiques. La vapeur peut être utilisée pour le linge sec2) Linge propre ou porté une seule fois. Ce programme réduit les plis et les odeurs3) et détend les fibres. Lorsque le programme est terminé, retirez rapidement le linge du tambour. Après un programme Vapeur, le repassage est facilité. N'utilisez aucun produit de lavage.
www.aeg.com Programme Outdoor Description du programme N'utilisez pas d'adoucissant et assurez-vous que le distributeur de produit de lavage ne contient pas de résidus d'adoucissant. Vêtements d'extérieur, de travail, de sport, imperméables et tissus perméables à l'air, vestes à molleton ou doublure isolante amovibles. La charge de linge recommandée est de 2.5 kg. Ce programme peut également être utilisé comme cycle de restauration de l'imperméabilité.
FRANÇAIS Programme Température par défaut Plage de températures Vitesse d'essorage de référence Plage de vitesses d'essorage Blanc/Couleurs 40 °C 95 °C - Froid 1400 tr/min 1400 tr/min 400 tr/min 8 kg Synthétiques 40 °C 60 °C - Froid 1200 tr/min 1200 tr/min 400 tr/min 3 kg Délicats 40 °C 40 °C - Froid 1200 tr/min 1200 tr/min 400 tr/min 3 kg Laine/Soie 40 °C 40 °C - Froid 1200 tr/min 1200 tr/min 400 tr/min 1.5 kg Charge maximale Programme vapeur - Vapeur - 1.
www.aeg.com Délicats Laine/Soie Anti-Allergie 20 min.
FRANÇAIS 23 8.2 Woolmark Apparel Care - Bleu Le cycle Laine de cet appareil a été approuvé par la société Woolmark pour le lavage des vêtements en laine portant une étiquette « lavage à la main », sous réserve que les vêtements soient lavés conformément aux instructions du fabricant de ce lave-linge. Consultez l'étiquette d'entretien du vêtement pour plus d'instructions sur le séchage et le lavage. M1623 Le symbole Woolmark est une marque de certification dans de nombreux pays. 9. RÉGLAGES 9.
www.aeg.com 9.5 Douceur Plus Sélectionnez l'option Douceur Plus pour optimiser la distribution d'assouplissant et rendre le linge plus doux. Il est recommandé lorsque vous utilisez de l'assouplissant. Pour activer/désactiver cette option, appuyez simultanément sur les touches Temp. et Options jusqu'à ce que le voyant s'allume/s'éteigne au-dessus de l'indicateur . Cette option augmente légèrement la durée du programme. 10.
FRANÇAIS 25 Suivez toujours les instructions imprimées sur l'emballage des produits de lavage, mais nous vous recommandons de ne pas dépasser le niveau maximal indiqué ( ). Cette quantité vous garantira les meilleurs résultats de lavage. ATTENTION! Veillez à ce qu'il n'y ait pas de linge coincé entre le joint et le hublot. Cela pourrait provoquer une fuite d'eau ou endommager le linge. 11.
www.aeg.com 4. Pour utiliser de la lessive liquide, tournez le volet vers le bas. Avec le volet en position BASSE : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne versez pas de lessive liquide audelà du niveau maximal indiqué sur le volet. • Ne sélectionnez pas de phase de prélavage. • Ne sélectionnez pas la fonction Départ différé. 5. Dosez le produit de lavage et l'assouplissant. 6. Fermez soigneusement le distributeur de produit de lavage. 11.5 Réglage d'un programme 1.
FRANÇAIS L'appareil démarre le décompte du départ différé. Lorsque le décompte est terminé, le programme démarre. L'estimation de la fonction PROSENSE démarre à la fin du décompte. Annulation du départ différé au cours du décompte Pour annuler le départ différé : 1. Appuyez sur la touche Départ/Pause pour mettre l'appareil en pause. Le voyant correspondant clignote. 2. Appuyez à plusieurs reprises sur la touche Départ Différé jusqu'à ce que s'affiche. 3.
www.aeg.com Par ex., la phase de lavage ou de prélavage est en cours : . Lorsque la phase se termine, le voyant correspondant cesse de clignoter et reste fixe. Le voyant de la phase suivante commence à clignoter. Par ex., la phase de rinçage est en cours : . Durant le cycle de lavage, l'appareil mélange le détergent, le détachant pour le traitement des tissus et/ou l'assouplissant avec de l'eau avant de les libérer dans le tambour.
FRANÇAIS Essorage/Vidange puis appuyez sur la touche Départ/Pause. 11.13 Fin du programme Lorsque le programme est terminé, l'appareil s'éteint automatiquement. Les signaux sonores retentissent (s'ils sont activés). Sur l'affichage, tous les voyants de la phase de lavage sont fixes et l'affichage du temps indique . Le voyant de la touche Départ/Pause s'éteint. Le hublot se déverrouille et le voyant s'éteint. 1. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil.
www.aeg.com Si vous sélectionnez un programme ou une option se terminant avec de l'eau dans le tambour, la fonction Veille n'éteint pas l'appareil pour vous rappeler qu'il faut vidanger l'eau. 12. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 12.1 Chargement du linge • Séparez le linge en fonction des articles : blancs, de couleurs, synthétiques, délicats et en laine. • Respectez les instructions de lavage qui figurent sur les étiquettes des vêtements.
FRANÇAIS • Ne mélangez pas différents types de produits de lavage. • Afin de préserver l'environnement, n'utilisez que la quantité de produit de lavage recommandée. • Respectez les instructions figurant sur l'emballage des détergents ou autres produits utilisés, sans dépasser le niveau maximal indiqué ( ). • Utilisez les produits de lavage recommandés pour le type et la couleur du textile, pour la température du programme et pour le niveau de salissure. 12.
www.aeg.com lavage, des résidus pelucheux et une augmentation des bactéries à l'intérieur du tambour et de la cuve. Ceci peut entraîner la formation de mauvaises odeurs et de moisissures. Pour éliminer ces dépôts et assainir l'intérieur de l'appareil, effectuez régulièrement un lavage d'entretien (au moins une fois par mois) : 1. Retirez le linge du tambour. 2.
FRANÇAIS 33 Vérifiez régulièrement le filtre de la pompe de vidange et assurez-vous qu'il est propre. Nettoyez la pompe de vidange si : • L'appareil ne vidange pas l'eau. • Le tambour ne tourne pas. • L'appareil fait un bruit inhabituel car la pompe de vidange est bloquée. • Le code d'alarme 3. Assurez-vous d'éliminer tous les résidus de lessive dans les parties supérieure et inférieure du logement. Utilisez une petite brosse pour nettoyer les recoins. s'affiche.
www.aeg.com le cas, contactez votre service aprèsvente. 4. Tournez le filtre à 180 degrés vers la gauche pour l'ouvrir, sans le retirer. Laissez l'eau s'écouler. 5. Lorsque le récipient est plein d'eau, remettez le filtre en position et videz le récipient. 6. Répétez les étapes 4 et 5 jusqu'à ce que l'eau cesse de s'écouler. 7. Tournez le filtre vers la fauche pour le retirer. 10. Nettoyez le filtre sous l'eau courante. 11. Replacez le filtre dans les guides spéciaux en le tournant vers la droite.
FRANÇAIS 35 2 1 Lorsque vous vidangez l'eau avec la vidange d'urgence, vous devez réactiver le système de vidange : a. Versez 2 litres d'eau dans le distributeur de produit de lavage pour le lavage principal. b. Démarrez le programme pour vidanger l'eau. 3. Utilisez une brosse à dents pour nettoyer le filtre de la valve situé à l'arrière de l'appareil. 13.
www.aeg.com Lorsque vous vidangez l'eau avec la vidange d'urgence, vous devez réactiver le système de vidange : 1. Versez 2 litres d'eau dans le distributeur de produit de lavage pour le lavage principal. 2. Démarrez le programme pour vidanger l'eau. 3. Placez les deux extrémités du tuyau d'alimentation dans un récipient et laissez l'eau s'écouler du tuyau. 4. Videz la pompe de vidange. Reportez-vous à la procédure de vidange d'urgence. 5.
FRANÇAIS Le programme ne s'est pas terminé correctement, ou l'appareil s'est arrêté trop tôt. Si le code d'alarme s'affiche à nouveau, contactez le service après-vente agréé. • - Le système de sécurité antidébordement s'est déclenché. 37 Débranchez l'appareil et fermez le robinet d'arrivée d'eau. Contactez le service après-vente agréé. AVERTISSEMENT! Éteignez l'appareil avant de procéder à la vérification. 14.2 Pannes possibles Problème Le programme ne démarre pas.
www.aeg.com Problème Solution possible • Sélectionnez le programme d'essorage. • Assurez-vous que le filtre de vidange n'est pas obstrué. La phase d'essorage n'a Nettoyez le filtre si nécessaire. Reportez-vous au chapitre pas lieu ou le cycle de la« Entretien et nettoyage ». vage dure plus long• Répartissez manuellement les vêtements dans la cuve et temps que d'habitude. lancez à nouveau la phase d'essorage. Ce problème peut résulter de problèmes d'équilibrage. Il y a de l'eau sur le sol.
FRANÇAIS Problème 39 Solution possible À la fin du cycle de lava- • Assurez-vous que le volet est dans la bonne position (vers ge, il y a des résidus de le HAUT pour la lessive en poudre, vers le BAS pour la lessiproduit de lavage dans le ve liquide). distributeur de produit • Veillez à utiliser le distributeur de produit de lavage en suide lavage. vant les indications données dans ce manuel d'utilisation. Après avoir effectué ces contrôles, mettez l'appareil en marche.
www.aeg.com 15. VALEURS DE CONSOMMATION Les valeurs indiquées sont obtenues après des essais en laboratoire, avec les normes correspondantes. Les données peuvent différer pour différentes raisons : la quantité et le type de linge, ou la température ambiante. La pression de l'eau, la tension de l'alimentation et la température de l'arrivée d'eau peuvent également affecter la durée du programme de lavage.
FRANÇAIS 41 16.
www.aeg.com • Pour démarrer le programme, appuyez sur la touche Départ/Pause (4). • L'appareil démarre. • À la fin du programme, sortez le linge. • Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil. 17.2 Nettoyage du filtre de la pompe de vidange 1 2 3 180˚ 1 2 Nettoyez régulièrement le filtre, tout particulièrement si le code d'alarme s'affiche. 17.3 Programmes Programmes Blanc/Couleurs Blanc/Couleurs Synthétiques Délicats Laine/Soie Vapeur Anti-Allergie 20 min.
FRANÇAIS Programmes Duvet Jeans 43 Charge Description de l'appareil 2.5 kg Pour une seule couette ou couverture synthétique 8 kg Des articles en jean ou en jersey. 1) Programme de lavage. 2) Programme de lavage et phase d'imperméabilisation. 18.
www.aeg.com Taux d'humidité résiduelle en % 52 Le « programme standard pour le coton à 60 °C » et le « programme standard pour le coton à 40 °C » sont les programmes de lavage standard utilisés pour les informations de l'étiquette énergétique et de la fiche produit. lls sont adaptés au nettoyage du linge en coton normalement sale et sont les programmes les plus efficaces en termes de consommation d'eau et d'énergie.
FRANÇAIS 45
www.aeg.
FRANÇAIS 47
157008783-A-392018 www.aeg.