L8FER962C USER MANUAL FR Notice d'utilisation Lave-linge
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................3 2. CONSIGNES DE SÉCURITÉ........................................................................................4 3. INSTALLATION............................................................................................................6 4. DESCRIPTION DE L'APPAREIL.................................................................................10 5.
FRANÇAIS 1. 3 INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • La pression de l'eau en service au niveau du point d'entrée en provenance de l'arrivée d'eau doit être comprise entre 0,5 bar (0,05 MPa) et 8 bar (0,8 MPa). Les orifices d'aération situés à la base (si présents) ne doivent pas être obstrués par de la moquette, un tapis, ou tout type de revêtement de sol. L'appareil doit être raccordé à l'arrivée d'eau à l'aide des tuyaux neufs fournis, ou d'autres tuyaux neufs fournis par le service après-vente agréé.
FRANÇAIS • Ne placez aucun récipient sous l'appareil pour récupérer tout éventuel écoulement. Contactez le service après-vente agréé pour connaître les accessoires disponibles. 2.2 Branchement électrique • L'appareil doit être relié à la terre. • Utilisez toujours une prise de courant de sécurité correctement installée. • Vérifiez que les paramètres figurant sur la plaque signalétique correspondent aux données électriques de votre réseau. • N'utilisez pas d'adaptateurs multiprises ni de rallonges.
www.aeg.com d'équipements électriques et électroniques (DEEE). 3. INSTALLATION AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 3.1 Déballage AVERTISSEMENT! Retirez l'intégralité de l'emballage et les boulons de transport avant d'installer l'appareil. AVERTISSEMENT! Servez-vous de gants. 4. Ouvrez le hublot et retirez la cale en polystyrène du joint du hublot, ainsi que tous les articles présents dans le tambour. 1. Retirez le film externe. Si nécessaire, utilisez un cutter. 2.
FRANÇAIS x4 1 7 A 2 8. Nettoyez soigneusement et séchez le bas de l'appareil. ATTENTION! N'utilisez pas d'alcool, de solvants ni de produits chimiques. 9. Veillez à identifier la taille et l'emplacement des différents isolants acoustiques. Reportez-vous à l'illustration : B Fixez les isolants acoustiques à température ambiante. 13. Remettez l'appareil en position verticale. 14. Retirez le câble d'alimentation électrique et le tuyau de vidange de leurs supports.
www.aeg.com 16. Retirez les entretoises en plastique. 17. Placez les caches en plastique, fournis dans le sachet du manuel d'utilisation, dans les trous. x4 L'appareil doit être de niveau et stable. Une mise de niveau correcte évite les vibrations, le bruit ou des déplacements de l'appareil au cours de son fonctionnement. Nous vous recommandons de conserver l'emballage et les boulons de transport en vue d'un éventuel déplacement de l'appareil. 3.2 Positionnement et mise de niveau 1.
FRANÇAIS 9 La partie rouge dans la fenêtre « A » témoigne de ce dysfonctionnement. 45 20 O O Assurez-vous que le tuyau d'arrivée d'eau n'est pas en position verticale. 3. Si nécessaire, desserrez la bague de serrage pour bien le positionner. 4. Raccordez le tuyau d'arrivée d'eau à un robinet d'eau froide fileté (3/4 pouce). ATTENTION! Assurez-vous que les raccords ne fuient pas. N'utilisez pas de rallonge si le tuyau d'alimentation est trop court.
www.aeg.com Vérifiez que l'extrémité du tuyau de vidange n'est pas plongée dans l'eau. Il pourrait y avoir un reflux d'eau sale dans l'appareil. 3. À une conduite fixe dotée d'une ventilation spéciale : insérez directement le tuyau dans la conduite d'évacuation. Reportezvous à l'illustration. L'extrémité du tuyau de vidange doit être ventilée en permanence, c'est-à-dire que le diamètre interne du conduit d’évacuation (minimum 38 mm - min.
FRANÇAIS tissus grâce aux différentes phases de pré-mélange qui dissolvent d'abord le produit de lavage puis l'assouplissant dans l'eau avant de les libérer dans le linge. Ainsi, chaque fibre est traitée et lavée. • La technologie ProSense détecte la quantité de linge et calcule la durée du programme en 30 secondes. Le programme de lavage est défini sur mesure pour la charge et le type de linge, sans consommer davantage de temps, d'énergie ou d'eau que nécessaire.
www.aeg.com 5. BANDEAU DE COMMANDE 5.
FRANÇAIS 13 5.2 Affichage MIX Voyant de charge maximale. Le voyant clignote lors de l'estimation de la charge de linge (consultez le paragraphe « Détection de la charge PROSENSE »). Voyant de charge maximale. Il clignote lorsque la charge de linge dépasse la charge maximale prévue pour le programme sélectionné. Indicateur Départ différé. Voyant Hublot verrouillé. L'indicateur numérique peut afficher : • La durée du programme (par ex. • Le départ différé (par ex. ou ). ). • La fin du cycle ( ).
www.aeg.com Voyant Sécurité enfants. Voyant Gain de temps. Indicateur de température. Le voyant tionnez un lavage à froid. apparaît lorsque vous sélec- Indicateur de vitesse d'essorage. Voyant Arrêt cuve pleine. Voyant Silence. Voyant de prélavage. Voyant Détachage. Voyant Rinçage plus. 6. MANETTES ET TOUCHES 6.1 Marche/Arrêt Appuyez sur cette touche pendant quelques secondes pour allumer et éteindre l'appareil.
FRANÇAIS 6.4 Essorage L'appareil vidange l'eau automatiquement au bout d'environ 18 heures. Lorsque vous sélectionnez un programme, l'appareil règle automatiquement la vitesse d'essorage maximale. 6.5 Taches/Prélavage Appuyez à plusieurs reprises sur cette touche pour : • Diminuer la vitesse d'essorage. Appuyez à plusieurs reprises sur la touche pour activer une des deux options, ou les deux. Seules les vitesses disponibles pour le programme sélectionné s'affichent.
www.aeg.com Cette option allonge la durée du programme. Si l'option Rinçage Plus est définie comme une option par défaut et que vous sélectionnez un programme de lavage, s'affiche. Dans ce cas, en appuyant sur la touche Rinçage Plus, il est possible de n'ajouter qu'un seul rinçage.
FRANÇAIS Si vous appuyez une quatrième fois sur la touche, l'appareil propose à nouveau un réglage par défaut du programme de lavage. 6.11 Départ Différé Cette option vous permet de différer le départ du programme à un moment qui vous convient mieux. Appuyez à plusieurs reprises sur la touche pour sélectionner le délai 17 souhaité. Le temps augmente par paliers de 30 minutes jusqu'à 90 minutes, puis de 2 heures à 20 heures.
www.aeg.com Programme Description du programme Programme vapeur pour les articles en coton et textiles Vapeur synthétiques. La vapeur peut être utilisée pour le linge sec2) Linge propre ou porté une seule fois. Ce programme réduit les plis et les odeurs3) et détend les fibres. Lorsque le programme est terminé, retirez rapidement le linge du tambour. Après un programme Vapeur, le repassage est facilité. N'utilisez aucun produit de lavage.
FRANÇAIS Programme 19 Description du programme N'utilisez pas d'adoucissant et assurez-vous que le distributeur de produit de lavage ne contient pas de résidus d'adoucissant. Outdoor Vêtements d'extérieur, de travail, de sport, imperméables et tissus perméables à l'air, vestes à molleton ou doublure isolante amovibles. La charge de linge recommandée est de 2.5 kg. Ce programme peut également être utilisé comme cycle de restauration de l'imperméabilité.
www.aeg.com Programme Température par défaut Plage de températures Vitesse d'essorage maximale Plage de vitesses d'essorage Synthétiques 40 °C 60 °C - Froid 1200 tr/min 1200 tr/min 400 tr/min 4 kg Délicats 40 °C 40 °C - Froid 1200 tr/min 1200 tr/min 400 tr/min 4 kg Laine/Soie 40 °C 40 °C - Froid 1200 tr/min 1200 tr/min 400 tr/min 2 kg - - 1.
FRANÇAIS 21 Laine/Soie ÖKOPower Anti-Allergie ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Taches1) ■ ■ ■ ■ ■ Prélavage ■ ■ ■ ■ ■ Rinçage Plus ■ ■ ■ ■ ■ Éco 2) ■ ■ ■ Gain de Temps 3) ■ ■ ■ Rinçage ■ ■ ■ ■ ■ ■ ■ ■ ■ Essorage ■ ■ ■ ■ ■ ■ ■ ■ ■ Vidange ■ ■ ■ ■ ■ ■ ■ ■ ■ Départ Différé ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Vapeur Plus 1) Douceur Plus ■ ■ ■ Jeans Délicats ■ Outdoor Synthétiques ■ Essorage Vapeur Blanc/Couleurs 20 min.
www.aeg.com 7.2 Woolmark Apparel Care Vert le lavage des vêtements en laine portant une étiquette « lavage à la main », sous réserve que les vêtements soient lavés conformément aux instructions du fabricant de ce lave-linge. Consultez l'étiquette d'entretien du vêtement pour plus d'instructions sur le séchage et le lavage. M1361 Au Royaume-Uni, en Irlande, à Hong Kong ainsi qu'en Inde, le symbole Woolmark est une marque de certification.
FRANÇAIS Pour désactiver/activer les signaux sonores lorsque le programme est terminé, appuyez simultanément sur les touches Rinçage Plus et Départ Différé pendant environ 6 secondes. Si vous désactivez les signaux sonores, ils continueront à retentir si l'appareil présente une anomalie. Cette option ajoute deux rinçages et s'affiche. 9.4 Douceur Plus Sélectionnez l'option Douceur Plus pour optimiser la distribution d'assouplissant et rendre le linge plus doux.
www.aeg.com 10.3 Ajout du produit de lavage et des additifs 1 2 3. Pour utiliser de la lessive en poudre, tournez le volet vers le haut. Compartiment pour la phase de prélavage et le programme de trempage. Compartiment pour la phase de lavage. Compartiment réservé aux additifs liquides (assouplissant, amidon). Niveau maximal pour la quantité d'additifs liquides. Compartiment réservé au détachant. Volet pour produit de lavage en poudre ou liquide.
FRANÇAIS Avec le volet en position BASSE : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne versez pas de lessive liquide audelà du niveau maximal indiqué sur le volet. • Ne sélectionnez pas de phase de prélavage. • Ne sélectionnez pas la fonction Départ différé. 5. Dosez le produit de lavage et l'assouplissant. 6. Fermez soigneusement le distributeur de produit de lavage. 25 3. Si nécessaire, sélectionnez une ou plusieurs options en appuyant sur les touches correspondantes.
www.aeg.com 2. Appuyez à plusieurs reprises sur la touche Départ Différé jusqu'à ce que s'affiche. 3. Appuyez de nouveau sur la touche Départ/Pause pour lancer le programme immédiatement. Modification du départ différé au cours du décompte Pour modifier le départ différé : 1. Appuyez sur la touche Départ/Pause pour mettre l'appareil en pause. Le voyant correspondant clignote. 2. Appuyez à plusieurs reprises sur la touche Départ Différé jusqu'à ce que le départ différé souhaité s'affiche. 3.
FRANÇAIS programme (les flèches clignotent en alternance). Si vous sélectionnez Vapeur Plus, les voyants de la phase à la vapeur s'allument. La phase à la vapeur est en cours : . La phase anti-froissage est en cours : . 10.10 Interruption d'un programme et modification des options Lorsque le programme est en cours, vous ne pouvez changer que quelques options : 1. Appuyez sur la touche Départ/Pause. Le voyant correspondant clignote. 2. Modifiez les options.
www.aeg.com formation de moisissures et l'apparition de mauvaises odeurs. 5. Fermez le robinet d'eau. 10.14 Vidange de l'eau après la fin du cycle Si vous avez sélectionné un programme ou une option qui ne vidange pas l'eau du dernier rinçage, le programme se termine, mais : • L'indicateur , le voyant d'option et le voyant Hublot fermé ou s'affichent. Le voyant de la phase en clignote. cours • Le tambour tourne toujours à intervalles réguliers pour éviter que le linge ne se froisse.
FRANÇAIS • Traitez au préalable les taches tenaces. • Lavez les taches incrustées avec un produit spécial. • Traitez les rideaux avec précautions. Retirez les crochets et placez les rideaux dans un sac de lavage ou une taie d'oreiller. • Ne lavez pas d'articles sans ourlet ou déchirés. Utilisez un sac de lavage pour les articles très petits et/ou délicats (par exemple les soutiensgorge à armatures, les ceintures, les bas, etc.).
www.aeg.com 12. ENTRETIEN ET NETTOYAGE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 12.1 Nettoyage extérieur Nettoyez uniquement l'appareil à l'eau chaude avec un savon doux. Séchez complètement toutes les surfaces. ATTENTION! N'utilisez pas d'alcool, de solvants ni de produits chimiques. Pour éliminer ces dépôts et assainir l'intérieur de l'appareil, effectuez régulièrement un lavage d'entretien (au moins une fois par mois) : 1. Retirez le linge du tambour. 2.
FRANÇAIS 1. Ouvrez le distributeur. Appuyez sur le loquet vers le bas comme indiqué sur l'illustration, puis retirez le distributeur. 31 programme de rinçage sans vêtement dans le tambour. 1 2 2. Retirez la partie supérieure du compartiment réservé à l'additif pour faciliter le lavage, et passez-le sous l'eau courante chaude pour éliminer toute trace d'accumulation de lessive. Après le nettoyage, remettez la partie supérieure en place. 12.
www.aeg.com 7. Tournez le filtre vers la fauche pour le retirer. 2 1 2. Placez un récipient sous le logement de la pompe de vidange pour recueillir l'eau qui s'écoule. 3. Ouvrez la goulotte vers le bas. Gardez toujours un chiffon à portée de main pour essuyer l'eau qui peut s'écouler lorsque vous retirez le filtre. 4. Tournez le filtre à 180 degrés vers la gauche pour l'ouvrir, sans le retirer. Laissez l'eau s'écouler. 1 2 8. Si nécessaire, retirez les peluches et objets du logement du filtre. 9.
FRANÇAIS 33 1 2 3 12. Fermez le couvercle de la pompe. 2. Retirez le tuyau d'arrivée de l'appareil en desserrant la bague de serrage. 2 1 Lorsque vous vidangez l'eau avec la vidange d'urgence, vous devez réactiver le système de vidange : a. Versez 2 litres d'eau dans le distributeur de produit de lavage pour le lavage principal. b. Démarrez le programme pour vidanger l'eau. 3. Utilisez une brosse à dents pour nettoyer le filtre de la valve situé à l'arrière de l'appareil. 12.
www.aeg.com évacuez toute l'eau restant dans le tuyau d'alimentation et la pompe de vidange. 45° 20° 12.9 Vidange d'urgence 1. Débranchez la fiche d'alimentation de la prise secteur. 2. Fermez le robinet d'eau. 3. Placez les deux extrémités du tuyau d'alimentation dans un récipient et laissez l'eau s'écouler du tuyau. 4. Videz la pompe de vidange. Reportez-vous à la procédure de vidange d'urgence. 5. Une fois que la pompe de vidange est vide, réinstallez le tuyau d'alimentation.
FRANÇAIS Si l'appareil est trop chargé, retirez des vêtements du tambour et/ou poussez sur le hublot tout en appuyant sur la touche Départ/ Pause jusqu'à ce que le voyant s'arrête de clignoter (reportez-vous à l'illustration ci-dessous). 35 • - L'alimentation électrique est instable. Attendez que l'alimentation électrique se stabilise. • - Il n'y a aucune communication entre les composants électroniques de l'appareil. Éteignez puis rallumez l'appareil.
www.aeg.com Problème Solution possible L'appareil se remplit d'eau et se vidange immédiatement. • Vérifiez que la position du tuyau de vidange est correcte. Le tuyau est peut-être positionné trop bas. Reportez-vous au chapitre « Instructions d'installation ». L'appareil ne vidange pas l'eau. • Assurez-vous que le siphon de l'évier n'est pas obstrué. • Assurez-vous que le tuyau de vidange n'est pas tordu ni plié. • Assurez-vous que le filtre de vidange n'est pas obstrué.
FRANÇAIS 37 Problème Solution possible La durée du programme augmente ou diminue durant l'exécution du programme. • La fonction ProSense est capable d'ajuster la durée du programme en fonction du type et de la quantité de linge. Reportez-vous au paragraphe « Fonction ProSense » dans le chapitre « Utilisation quotidienne ». Les résultats de lavage ne sont pas satisfaisants. • Augmentez la quantité de produit de lavage ou utilisez-en un autre.
www.aeg.com 3. Ouvrez le volet du filtre. 4. Maintenez le dispositif de déverrouillage d'urgence en le tirant vers le bas et ouvrez le hublot simultanément. 5. Sortez le linge et refermez le hublot. 6. Fermez le volet du filtre. 14. VALEURS DE CONSOMMATION Les valeurs indiquées sont obtenues après des essais en laboratoire, avec les normes correspondantes. Les données peuvent différer pour différentes raisons : la quantité et le type de linge, ou la température ambiante.
FRANÇAIS Programmes Charge (kg) Consommation énergétique (kWh) Consommation d'eau (litres) 39 Durée ap- Humidité proximati- résiduelle ve du pro- (%)1) gramme (minutes) Programmes standard pour le coton Coton 60 °C standard 9 0.60 54 238 44 Coton 60 °C standard 4.5 0.37 39 191 44 Coton 40 °C standard 4.5 0.36 40 190 44 1) Au terme de la phase d'essorage. Mode « Éteint » (W) Mode « Veille » (W) 0.30 0.
www.aeg.com 16. ACCESSOIRES 16.1 Disponible sur www.aeg.com/shop ou chez un revendeur agréé Seuls les accessoires appropriés et agréés par AEG peuvent répondre aux normes de sécurité de l'appareil. Si les pièces ne sont pas agréées, toute réclamation sera refusée. 16.2 Kit de plaques de fixation Si vous installez l'appareil sur un socle, stabilisez l'appareil à l'aide des plaques de fixation. Lisez attentivement la notice fournie avec l'accessoire.
FRANÇAIS ménagères. Emmenez un tel produit dans votre centre local de recyclage ou contactez vos services municipaux.
www.aeg.
FRANÇAIS 43
157008691-A-162017 www.aeg.