L8FSE96B USER MANUAL FR Notice d'utilisation Lave-linge
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................3 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. INSTALLATION............................................................................................................6 4. ACCESSOIRES........................................................................................................... 11 5.
FRANÇAIS 3 Sous réserve de modifications. 1. INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com 1.2 Sécurité générale • • • • • • • • • • • Ne modifiez pas les caractéristiques de cet appareil. Cet appareil est conçu uniquement pour un usage domestique et des situations telles que : – dans des cuisines réservées aux employés dans des magasins, bureaux et autres lieux de travail ; – pour une utilisation privée, par les clients, dans des hôtels et autres lieux de séjour ; – dans les parties communes d'immeubles d'appartements, ou dans les laveries automatiques.
FRANÇAIS 5 2. CONSIGNES DE SÉCURITÉ 2.1 Installation L'installation doit être confirme aux réglementations nationales en vigueur. • Retirez l'intégralité de l'emballage et les boulons de transport, y compris le joint en caoutchouc et l'entretoise en plastique. • Conservez les boulons de transport en lieu sûr. Si l'appareil doit être de nouveau déplacé, les boulons doivent être réutilisés pour maintenir le tambour en place et éviter tout dégât interne.
www.aeg.com • N'utilisez pas de rallonge si le tuyau d'alimentation est trop court. Contactez le service après-vente agréé pour remplacer le tuyau d'alimentation. • Il est possible de voir de l'eau s'écouler du tuyau d'évacuation. Cette eau provient des tests effectués sur l'appareil en usine. • La longueur maximale du tuyau de vidange est de 400 cm. Contactez le service après-vente agréé pour obtenir d'autres longueurs de tuyaux de vidange et des rallonges. 2.
FRANÇAIS 7 7. Retirez la protection en polystyrène en bas de l'appareil. 1 3. Retirez le film interne. 2 8. Remettez l'appareil en position verticale. 4. Ouvrez le hublot et retirez la cale en polystyrène du joint du hublot, ainsi que tous les articles présents dans le tambour. 9. Retirez le câble d'alimentation électrique et le tuyau de vidange de leurs supports. Il est possible de voir de l'eau s'écouler du tuyau d'évacuation. Cette eau provient des tests effectués sur l'appareil en usine. 5.
www.aeg.com 11. Retirez les entretoises en plastique. 12. Placez les caches en plastique, fournis dans le sachet du manuel d'utilisation, dans les trous. x4 L'appareil doit être de niveau et stable. Une mise de niveau correcte évite les vibrations, le bruit ou des déplacements de l'appareil au cours de son fonctionnement. Nous vous recommandons de conserver l'emballage et les boulons de transport en vue d'un éventuel déplacement de l'appareil. 3.
FRANÇAIS 9 La partie rouge dans la fenêtre « A » témoigne de ce dysfonctionnement. 45 20 O O A Dans ce cas, fermez le robinet d'arrivée d'eau et contactez le service après-vente agréé pour faire remplacer le tuyau. Assurez-vous que le tuyau d'arrivée d'eau n'est pas en position verticale. 3. Si nécessaire, desserrez la bague de serrage pour bien le positionner. 4. Raccordez le tuyau d'arrivée d'eau à un robinet d'eau froide fileté (3/4 pouce). 3.
www.aeg.com Vérifiez que l'extrémité du tuyau de vidange n'est pas plongée dans l'eau. Il pourrait y avoir un reflux d'eau sale dans l'appareil. 3. À une conduite fixe dotée d'une ventilation spéciale : insérez directement le tuyau dans la conduite d'évacuation. Reportezvous à l'illustration. L'extrémité du tuyau de vidange doit être ventilée en permanence, c'est-à-dire que le diamètre interne du conduit d’évacuation (minimum 38 mm - min.
FRANÇAIS 11 4. ACCESSOIRES 4.1 Disponible sur www.aeg.com/shop ou chez un revendeur agréé Seuls les accessoires appropriés et agréés par AEG peuvent répondre aux normes de sécurité de l'appareil. Si les pièces ne sont pas agréées, toute réclamation sera refusée. Assurez-vous de la compatibilité du kit de superposition en vérifiant la profondeur de vos appareils. Le kit de superposition peut uniquement être utilisé avec les appareils indiqués dans la brochure fournie avec l'accessoire.
www.aeg.com produit de lavage puis l'assouplissant dans l'eau avant de les libérer dans le linge. Ainsi, chaque fibre est traitée et lavée. • La technologie ProSense détecte la quantité de linge et calcule la durée du programme en 30 secondes. Le programme de lavage est défini sur mesure pour la charge et le type de linge, sans consommer davantage de temps, d'énergie ou d'eau que nécessaire. • La vapeur est un moyen rapide et simple de rafraîchir les vêtements.
FRANÇAIS 13 6. BANDEAU DE COMMANDE 6.1 Description du bandeau de commande 3 2 1 4 5 12 1 Sélecteur de programme 2 Affichage 3 Appuyez sur la touche Éco (Eco) 4 Touche Gain de temps (Tijd Besparen - Gain de Temps) 5 Touche Rinçage plus (Spoelen Rinçage) • Option Rinçage plus (Extra Spoelen - Rinçage plus) • Annuler la phase de lavage option Rinçage uniquement (Rinçage uniquement) 6 Touche Départ/Pause (Start/Pauze Départ/Pause) 7 Touche Taches/Prélavage (Vlek./ Voorw. - Taches/Prélav.
www.aeg.com 6.2 Affichage MIX Voyant de charge maximale. Le voyant clignote lors de l'estimation de la charge de linge (consultez le paragraphe « Détection de la charge ProSense »). Voyant de charge maximale. Il clignote si la charge de linge dépasse la charge déclarée. Voyant Hublot verrouillé. Indicateur Départ différé. L'indicateur numérique peut afficher : • La durée du programme (par ex. • Le départ différé (par ex. ou ). ). • La fin du cycle ( ). • Un code d'alarme (par ex. ).
FRANÇAIS 15 Voyants d'économies d'énergie. Le voyant apparaît en sélectionnant un programme pour le coton à 40 °C ou 60 °C. Voyant Gain de temps. Indicateur de vitesse d'essorage. Voyant Arrêt cuve pleine. Indicateur Extra silence. Indicateur de température. Le voyant tionnez un lavage à froid. apparaît lorsque vous sélec- 7. MANETTES ET TOUCHES 7.1 Aan /Uit - Marche/Arrêt 7.3 Temp.°C Appuyez sur cette touche pendant quelques secondes pour allumer et éteindre l'appareil.
www.aeg.com éviter que le linge ne se froisse. Vous devez vidanger l'eau pour pouvoir ouvrir le hublot. Si vous appuyez sur la touche Start/ Pauze - Départ/Pause, l'appareil effectue une phase d'essorage et vidange l'eau. L'appareil vidange l'eau automatiquement au bout d'environ 18 heures. • Activer l'option Extra Silence. Les phases d'essorage intermédiaire et final sont supprimées et le programme se termine avec de l'eau dans le tambour. Cela réduit le froissage du linge.
FRANÇAIS Cette option peut rallonger la durée du programme. 7.6 Plus Steam Cette option ajoute une phase vapeur, suivie par une courte phase antifroissage à la fin du programme de lavage. La phase vapeur réduit les plis sur le linge et facilite son repassage. L'indicateur clignote sur l'affichage durant la phase vapeur. Cette option peut rallonger la durée du programme. Lorsque le programme s'arrête, un zéro s'affiche , le voyant est fixe et le commence à clignoter.
www.aeg.com d'essorage et les variations de tension du réseau électrique. L'indicateur s'allume. Si vous sélectionnez le programme Coton à 40 °C ou 60 °C et qu'une autre option n'est sélectionnée, 7.11 Start/Pauze - Départ/ Pause Appuyez sur la touche Start/Pauze Départ/Pause pour démarrer l'appareil, le mettre en pause ou interrompre un programme en cours.
FRANÇAIS Programme 19 Description du programme Programme vapeur pour les articles en coton et textiles Stoom - Vapeur synthétiques. La vapeur peut être utilisée pour le linge sec2) Linge propre ou porté une seule fois. Ce programme réduit les plis et les odeurs3) et détend les fibres. Lorsque le programme est terminé, retirez rapidement le linge du tambour. Après un programme Vapeur, le repassage est facilité. N'utilisez aucun produit de lavage.
www.aeg.com Programme Outdoor Description du programme N'utilisez pas d'adoucissant et assurez-vous que le distributeur de produit de lavage ne contient pas de résidus d'adoucissant. Vêtements d'extérieur, de travail, de sport, imperméables et tissus perméables à l'air, vestes à molleton ou doublure isolante amovibles. La charge de linge recommandée est de 2.5 kg. Ce programme peut également être utilisé comme cycle de restauration de l'imperméabilité.
FRANÇAIS 21 Température du programme, vitesse d'essorage maximale et charge maximale Programme Température par défaut Plage de températures Vitesse d'essorage de Charge maxiréférence male Plage de vitesses d'essorage 40 °C 95 °C - Froid 1600 tr/min 1600 tr/min - 400 tr/min 9 kg 40 °C Synthetica - Synthétiques 60 °C - Froid 1200 tr/min 1200 tr/min - 400 tr/min 4 kg Fijne Was - Délicats 40 °C 40 °C - Froid 1200 tr/min 1200 tr/min - 400 tr/min 4 kg Wol/Zijde - Laine/Soie 40 °C 40 °C - Froid 12
www.aeg.com Synthetica - Synthétiques Fijne Was - Délicats Wol/Zijde - Laine/Soie ÖKOPower Anti-Allergie - Anti-Allergies 20 min.
Soft Plus 23 Machine Clean ■ Outdoor ■ Options 20 min. - 3 kg Anti-Allergie - Anti-Allergies ■ ÖKOPower Fijne Was - Délicats ■ Stoom - Vapeur Synthetica - Synthétiques ■ Wol/Zijde - Laine/Soie Katoen - Blanc/Couleurs Programme FRANÇAIS 1) Cette option n'est pas disponible avec des températures de lavage inférieures à 40 °C. 2) Cette option n'est pas disponible avec des températures de lavage inférieures à 30 °C.
www.aeg.com • Avant d'appuyer sur la touche Start/ Pauze - Départ/Pause : l'appareil ne peut pas démarrer. Après avoir éteint l'appareil, cette option reste sélectionnée. 9.4 Rinçage plus permanent 9.3 Signaux sonores • Pour activer/désactiver cette option, appuyez simultanément sur les touches Spoelen - Rinçage et Vlek./ Voorw. - Taches/Prélav. jusqu'à ce que le voyant Extra Spoelen - Rinçage plus s'allume/s'éteigne.
FRANÇAIS 25 11. UTILISATION QUOTIDIENNE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 11.3 Ajout du produit de lavage et des additifs 11.1 Activation de l'appareil 1. Branchez l'appareil sur le secteur. 2. Ouvrez le robinet d'eau. 3. Appuyez sur la touche Aan /Uit Marche/Arrêt pendant quelques secondes pour allumer l'appareil. Un signal court retentit (si activé). Le sélecteur de programme est automatiquement réglé sur le programme Coton.
www.aeg.com 11.4 Vérifiez la position du volet 1. Tirez le distributeur de produit de lavage jusqu'à la butée. 2. Appuyez sur le levier pour faire sortir le distributeur. 1 2 3. Pour utiliser de la lessive en poudre, tournez le volet vers le haut. 4. Pour utiliser de la lessive liquide, tournez le volet vers le bas. Avec le volet en position BASSE : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne versez pas de lessive liquide audelà du niveau maximal indiqué sur le volet.
FRANÇAIS 3. Si nécessaire, sélectionnez une ou plusieurs options en appuyant sur les touches correspondantes. Les indicateurs correspondants s'affichent et les informations données changent en conséquence. Si votre sélection n'est pas possible, aucun indicateur ne s'affiche et un signal sonore retentit. 11.6 Départ d'un programme Appuyez sur la touche Start/Pauze Départ/Pause pour lancer le programme. Le voyant correspondant cesse de clignoter et reste fixe.
www.aeg.com À la fin de la détection de la charge, en cas de surcharge du tambour, le voyant clignote sur l'affichage : dans ce cas, pendant 30 secondes, il est possible de mettre l'appareil en pause et de retirer l'excédent de vêtements. Dès que vous avez retiré l'excédent de vêtements, appuyez sur la touche Start/ Pauze - Départ/Pause pour relancer le programme. La phase ProSense peut être répétée jusqu'à trois fois (voir point 1).
FRANÇAIS Si la phase ProSense a déjà été effectuée et que le remplissage d'eau a déjà commencé, le nouveau programme démarre et la phase ProSense n'est pas répétée. L'eau et le produit de lavage ne sont pas vidangés afin d'éviter tout gaspillage. La durée maximale du programme s'affiche et se met à jour environ 20 minutes après le départ du nouveau programme. 11.
www.aeg.com Le voyant de l'option ou s'éteint, tandis que le voyant clignote, puis s'éteint. 3. Une fois le programme terminé et le voyant de verrouillage du hublot éteint, vous pouvez ouvrir le hublot. 4. Appuyez sur la touche Aan /Uit Marche/Arrêt pendant quelques secondes pour éteindre l'appareil. Dans tous les cas, l'appareil vidange l'eau automatiquement au bout d'environ 18 heures. 11.
FRANÇAIS 12.2 Taches tenaces Pour certaines taches, l'eau et les produits de lavage ne suffisent pas. Il est recommandé de pré-traiter ces taches avant de mettre les articles dans l'appareil. Des détachants spéciaux sont disponibles. Utilisez le détachant spécial adapté au type de tache et de textile. 12.
www.aeg.com 13.2 Détartrage 13.4 Joint du hublot Si, dans votre région, la dureté de l'eau est élevée ou modérée, il est recommandé d'utiliser un produit de détartrage de l'eau pour lave-linge. Examinez régulièrement le tambour à la recherche de tartre. Les produits de lavage habituels contiennent déjà des agents adoucisseurs d'eau, mais nous vous recommandons d'effectuer occasionnellement un cycle de lavage, tambour vide, avec un produit de détartrage.
FRANÇAIS 33 13.6 Nettoyage du distributeur de produit de lavage Pour éviter les dépôts de lessive séchée, d'assouplissant coagulé et/ou la formation de moisissures dans le distributeur de produit de lavage, veillez à effectuer régulièrement la procédure de nettoyage suivante : 1. Ouvrez le distributeur. Appuyez sur le loquet vers le bas comme indiqué sur l'illustration, puis retirez le distributeur. 1 4. Réinstallez le distributeur de lavage dans ses rails et fermez-le.
www.aeg.com AVERTISSEMENT! • Ne retirez pas le filtre pendant que l'appareil fonctionne. • Ne nettoyez pas la pompe si l'eau de l'appareil est chaude. Attendez que l'eau refroidisse. Pour nettoyer la pompe, procédez comme suit : 1. Ouvrez le couvercle de la pompe. 2 5. Lorsque le récipient est plein d'eau, remettez le filtre en position et videz le récipient. 6. Répétez les étapes 4 et 5 jusqu'à ce que l'eau cesse de s'écouler. 7. Tournez le filtre vers la fauche pour le retirer. 1 2.
FRANÇAIS 35 13.8 Nettoyage du tuyau d'arrivée d'eau et du filtre de la vanne Il est recommandé de nettoyer occasionnellement les deux filtres du tuyau d'arrivée d'eau et la valve pour éliminer les dépôts accumulés avec le temps : 1. Retirez le tuyau d'arrivée d'eau du robinet et nettoyez le filtre. 11. Replacez le filtre dans les guides spéciaux en le tournant vers la droite. Assurez-vous de serrer correctement le filtre afin d'empêcher toute fuite. 1 2 2 3 1 2.
www.aeg.com 4. Lorsque vous rebranchez le tuyau à l'arrière de l'appareil, tournez-le vers la gauche ou la droite (et non en position verticale) en fonction de la position du robinet. 2. Démarrez le programme pour vidanger l'eau. 13.10 Précautions contre le gel Si l'appareil est installé dans un local où la température peut être négative, évacuez toute l'eau restant dans le tuyau d'alimentation et la pompe de vidange. 45° 20° 13.
FRANÇAIS Si l'appareil est trop chargé, retirez des vêtements du tambour et/ou poussez sur le hublot tout en appuyant sur la touche Start/Pauze - Départ/Pause jusqu'à ce 37 • - L'alimentation électrique est instable. Attendez que l'alimentation électrique se stabilise. • - Il n'y a aucune communication entre les composants électroniques de l'appareil. Éteignez puis rallumez l'appareil. Le programme ne s'est pas terminé correctement, ou l'appareil s'est arrêté trop tôt.
www.aeg.com Problème Solution possible L'appareil se remplit d'eau et se vidange immédiatement. • Vérifiez que la position du tuyau de vidange est correcte. Le tuyau est peut-être positionné trop bas. Reportez-vous au chapitre « Instructions d'installation ». L'appareil ne vidange pas l'eau. • Assurez-vous que le siphon de l'évier n'est pas obstrué. • Assurez-vous que le tuyau de vidange n'est pas tordu ni plié. • Assurez-vous que le filtre de vidange n'est pas obstrué.
FRANÇAIS 39 Problème Solution possible La durée du programme augmente ou diminue durant l'exécution du programme. • La fonction ProSense est capable d'ajuster la durée du programme en fonction du type et de la quantité de linge. Reportez-vous au paragraphe « Fonction ProSense » dans le chapitre « Utilisation quotidienne ». Les résultats de lavage ne sont pas satisfaisants. • Augmentez la quantité de produit de lavage ou utilisez-en un autre.
www.aeg.com 2. Débranchez la fiche d'alimentation de la prise secteur. 3. Ouvrez le volet du filtre. 4. Poussez le levier de déverrouillage d'urgence une fois vers le bas. Poussez-le une nouvelle fois vers le bas, maintenez-le vers le bas tout en ouvrant le hublot de l'appareil. 5. Sortez le linge et refermez le hublot. 6. Fermez le volet du filtre. 15. VALEURS DE CONSOMMATION Les valeurs indiquées sont obtenues après des essais en laboratoire, avec les normes correspondantes.
FRANÇAIS Programmes Charge (kg) Consommation énergétique (kWh) Consommation d'eau (litres) Synthetica - Synthétiques 40 °C 4 0.72 55 160 35 Fijne Was - Délicats 40 °C 4 0.60 60 120 35 Wol/Zijde - Laine/Soie 30 °C 2 0.35 58 60 30 41 Durée ap- Humidité proximati- résiduelle ve du pro- (%)1) gramme (minutes) Programmes standard pour le coton Coton 60 °C standard 9 0.59 54 238 44 Coton 60 °C standard 4.5 0.38 39 191 44 Coton 40 °C standard 4.5 0.
www.aeg.com Classe d’efficacité énergétique A+++ Vitesse d'essorage 1551 tr/min Vitesse d'essorage maximale 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté 3/4'' . 17. GUIDE DE DÉMARRAGE RAPIDE 17.1 Utilisation quotidienne 2 3 1 4 • Branchez l'appareil sur le secteur. • Ouvrez le robinet d'eau. • Appuyez sur la touche Aan /Uit Marche/Arrêt pour allumer l'appareil (1). • Tournez le sélecteur pour choisir le programme souhaité (2).
FRANÇAIS 43 17.3 Programmes Programmes Katoen - Blanc/Couleurs Katoen - Blanc/Couleurs Synthetica - Synthétiques Fijne Was - Délicats Wol/Zijde - Laine/Soie Stoom - Vapeur ÖKOPower Anti-Allergie - Anti-Allergies 20 min. - 3 kg Charge 9 kg Coton blanc et couleurs. 9 kg Coton blanc et couleurs. Programmes standard pour les valeurs de consommation de l'étiquette énergétique. 4 kg Articles en textiles synthétiques ou mixtes.
www.aeg.com Modèle Capacité nominale en kg Classe d'efficacité énergétique L8FSE96B, PNC914550631 9 A+++ Consommation énergétique annuelle en kWh basée sur 220 cycles de lavage du programme standard pour le coton, à 60 °C et 40 °C avec une charge complète ou partielle, et la consommation des modes basse consommation. La consommation énergétique réelle dépendra de l'utilisation de l'appareil. 106 Consommation énergétique du programme standard pour le coton à 60 °C avec une charge complète en kWh 0.
FRANÇAIS Émissions acoustiques de l'air en db(A) lavage 51 Émissions acoustiques de l'air en db(A) essorage 77 Appareil intégrable O/N 45 Non Les informations fournies dans le tableau ci-dessus sont conformes au règlement 1015/2010 appliquant la directive 2009/125/CE de la commission européenne. 19. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le électroniques. Ne jetez pas les appareils symbole . Déposez les emballages dans les conteneurs prévus à cet effet.
www.aeg.
FRANÇAIS 47
157003963-A-392018 www.aeg.