L8WBC61SC USER MANUAL CS Návod k použití Pračka se sušičkou
www.aeg.com OBSAH 1. BEZPEČNOSTNÍ INFORMACE............................................................................3 2. BEZPEČNOSTNÍ POKYNY ................................................................................. 5 3. INSTALACE.......................................................................................................... 7 4. POPIS SPOTŘEBIČE......................................................................................... 11 5. OVLÁDACÍ PANEL..............................
ČESKY 1. 3 BEZPEČNOSTNÍ INFORMACE Tento návod si pečlivě přečtěte ještě před instalací spotřebiče a jeho prvním použitím. Výrobce nenese odpovědnost za žádný úraz ani škodu v důsledku nesprávné instalace nebo použití. Návod k použití vždy uchovávejte na bezpečném a přístupném místě pro jeho budoucí použití. 1.1 Bezpečnost dětí a postižených osob VAROVÁNÍ! Hrozí nebezpečí udušení, úrazu nebo jiných trvalých následků.
www.aeg.com • • • • • • • • • • • • • Spotřebič neinstalujte za zamykatelné dveře, posuvné dveře a dveře se závěsem na opačné straně, kde by dvířka spotřebiče nešla zcela otevřít. Síťovou zástrčku zapojte do síťové zásuvky až na konci instalace spotřebiče. Zkontrolujte, zda je zástrčka po instalaci spotřebiče přístupná. Větrací otvor umístěný vespod spotřebiče nesmí být zakrytý kobercem, rohoží ani jinou podlahovou krytinou.
ČESKY • • • • • • • • • • množstvím pracího prostředku, a teprve pak sušit v pračce se sušičkou. Nepoužívejte spotřebič, pokud je prádlo zašpiněno průmyslovými chemikáliemi. Nevyprané prádlo v pračce se sušičkou nesušte. V pračce se sušičkou se nesmějí sušit předměty z pěnové pryže (latexové pěny), koupací čepice, nepromokavé tkaniny, oděvy s gumovou vložkou nebo oděvy či polštáře s vycpávkami z pěnové pryže.
www.aeg.com • • • • • pomocí těchto šroubů se musí zajistit buben, aby nedošlo k poškození vnitřních součástí. Při přemisťování spotřebiče buďte vždy opatrní, protože je těžký. Vždy používejte ochranné rukavice a uzavřenou obuv. Poškozený spotřebič neinstalujte ani nepoužívejte. Spotřebič neinstalujte tam, kde nelze dvířka spotřebiče plně otevřít. Nastavte nožičky tak, aby mezi spotřebičem a podlahou byl požadovaný prostor.
ČESKY • • Odstraňte dveřní západku, abyste zabránili uvěznění dětí a domácích zvířat v bubnu. Spotřebič zlikvidujte v souladu s místními předpisy pro likvidaci 7 elektrického a elektronického odpadu (WEEE). 3. INSTALACE VAROVÁNÍ! Viz kapitoly o bezpečnosti. 3.1 Vybalení VAROVÁNÍ! Před instalací spotřebiče odstraňte všechny přepravní šrouby a obaly. VAROVÁNÍ! Používejte rukavice. 1. Odstraňte vnější fólii. V případě potřeby použijte řezák. 2. Odstraňte kartónový vršek a polystyrénový obalový materiál.
www.aeg.com 1 2 8. Postavte spotřebič do svislé polohy. 9. Vyndejte napájecí kabel a vypouštěcí hadici z držáků. Z vypouštěcí hadice může vytékat voda. To se děje z důvodu testování spotřebiče pomocí vody ve výrobním závodě. 11. Vytáhněte plastové distanční kolíky. 12. Do otvorů vložte plastové krytky, které naleznete v sáčku s návodem k použití. Obaly a přepravní šrouby doporučujeme uschovat pro případné další stěhování spotřebiče. 3.2 Umístění a vyrovnání 1.
ČESKY 45 20 9 O O x4 Spotřebič musí být vyrovnaný a stabilní. Správné vyrovnání spotřebiče zabraňuje vibracím, hluku a pohybu spotřebiče během jeho provozu. Je-li spotřebič umístěn na podstavci nebo pokud je na pračce instalována sušička, použijte příslušenství popsané v části „Příslušenství“. Pozorně si přečtěte pokyny dodané spolu se spotřebičem a příslušenstvím. Přesvědčte se, že přívodní hadice není ve svislé poloze. 3. V případě potřeby povolte kruhovou matici a nastavte ji do správné polohy. 4.
www.aeg.com Červené políčko v okénku „A“ značí takové poškození. A Pokud se objeví, zavřete vodovodní kohoutek a zkontaktujte autorizované servisní středisko ohledně výměny této hadice. 3.5 Vypouštění vody Vypouštěcí hadice by se měla nacházet ve výšce minimálně 60 cm a maximálně 100 cm od podlahy. Hadici lze prodloužit o maximálně 400 cm. V případě prodloužení hadice nebo ostatních hadic kontaktujte autorizované servisní středisko. Ujistěte se, že konec vypouštěcí hadice není ponořen ve vodě.
ČESKY 11 Ujistěte se, že je na vypouštěcí hadici oblouk, aby se do spotřebiče nedostávala voda či nečistoty vypouštěné z umyvadla. 6. Zaveďte hadici přímo do odpadního potrubí zabudovaného ve stěně místnosti se zajištěním pomocí spony. 5. Bez plastového kolena, k přípojce sifonu - Vypouštěcí hadici nasuňte na hubici sifonu a zajistěte ji sponou. Viz obrázek. 4. POPIS SPOTŘEBIČE 4.
www.aeg.com 5 6 7 8 9 Typový štítek Filtr vypouštěcího čerpadla Nožičky pro vyrovnání spotřebiče Vypouštěcí hadice Připojení přívodní hadice 10 Napájecí kabel 11 Přepravní šrouby 12 Držák hadice 5. OVLÁDACÍ PANEL 5.
ČESKY 5.2 Displej MIX Ukazatel hmotnosti prádla. Tento symbol bliká během odhadování náplně prádla (viz odstavec o „detekci náplně ProSense“). Ukazatel maximální náplně prádla. Bliká, když náplň prádla přesáhne maximální deklarovanou náplň zvoleného programu. Ukazatel množství pracího prostředku: hodnota zobrazuje procento potřebného množství pracího prostředku. Ukazatel dětské bezpečnostní pojistky. Ukazatel doby sušení. Ukazatel zablokování dvířek.
www.aeg.com Ukazatel sušicí fáze. Ukazatel funkce Sušení k žehlení. Ukazatel funkce Sušení k uložení. Ukazatel funkce Extra sušení. Ukazatel teploty. Ukazatel praní. se zobrazí, když je nastavené studené Ukazatel rychlosti odstřeďování. Ukazatel funkce Zastavení máchání. Ukazatel funkce Extra tichý. Ukazatel předpírky. Ukazatel skvrn. ECO Ukazatele úspory energie. Zobrazí se po nastavení programu Bavlna Eco. Ukazatel odloženého startu. 6. VOLIČ A TLAČÍTKA 6.
ČESKY Když se na displeji zobrazí ukazatele 6.5 Skvrny/Předpírka a Opětovným stisknutím tohoto tlačítka zapnete jednu z těchto dvou funkcí. , spotřebič neohřívá vodu. 6.4 Odstřeďování Když nastavíte program, spotřebič automaticky zvolí maximální rychlost odstřeďování. Na displeji se zobrazí příslušný ukazatel. • Opakovaným stisknutím tohoto tlačítka: • Snížíte rychlost odstřeďování. • • Na displeji se zobrazí pouze rychlosti odstřeďování dostupné se zvoleným programem.
www.aeg.com 6.7 Rychlé prání Pomocí této funkce můžete zkrátit délku programu. Je-li vaše prádlo normálně nebo lehce zašpiněné, může být vhodné zkrátit prací program. Jedním stisknutím tohoto tlačítka zkrátíte délku programu. • V případě menší náplně dvojím stisknutím tohoto tlačítka nastavíte extra krátký program. Délka programu na displeji se odpovídajícím způsobem upraví. S každým stisknutím tohoto tlačítka se doba prodlouží o pět minut. U některých druhů tkanin nelze nastavit všechny hodnoty času.
ČESKY Program 17 Popis programu Bílá a barevná bavlna. Normálně a lehce zašpiněné. Bavlna Bavlna Eco Bílá a barevná bavlna. Normálně a lehce zašpiněné. Úsporný program pro bavlnu. Tento program při 60 °C s ná‐ plní 10 kg je výchozím programem pro údaje na energetickém štítku podle směrnice EHS 92/75. Nastavením tohoto progra‐ mu dosáhnete dobrých výsledků praní a snížíte spotřebu ener‐ gie. Délka pracího programu se prodlouží. Syntetika Prádlo ze syntetických nebo směsových tkanin.
www.aeg.com Program Pára Popis programu Parní programy2) Parní program lze použít u usušeného, vypraného nebo pouze jedinkrát nošeného prádla. Pomocí těchto programů můžete snížit zmačkání prádla, odstranit nepříjemné pa‐ chy a získat měkčí prádlo. Nepoužívejte žádný prací prostředek. V případě potřeby odstraňte skvrny praním nebo pomocí odstraňovače skvrn. Parní programy neprovádí žádné hygienické cykly.
ČESKY Program Výchozí teplota Teplotní rozsah Maximální rychlost odstřeďování Rozsah otáček odstředění Maximální množ‐ ství prádla Syntetika 40 °C 60 °C - studená 1200 ot/min 1200 ot/min - 400 ot/min 4 kg Jemné 40 °C 40 °C - studená 1200 ot/min 1200 ot/min - 400 ot/min 4 kg Vlna/Ruční praní 40 °C 40 °C - studená 1200 ot/min 1200 ot/min - 400 ot/min 2 kg Outdoor 30 °C 40 °C - studená 1200 ot/min 1200 ot/min - 400 ot/min 2 kg NonStop ÖKOPower 30 °C 60 °C - 30 °C 1600 ot/min 1600 ot/min
www.aeg.
Stupeň sušení 21 Odstřeďování/Vypouštění Máchání Pára NonStop ÖKOPower Outdoor Vlna/Ruční praní ■4) Jemné ■ Syntetika Bavlna Eco Funkce Bavlna Program ČESKY 1) Pokud nastavíte funkci Bez odstředění, spotřebič bude pouze vypouštět vodu. 2) Tato funkce není k dispozici s teplotou nižší než 40 °C. 3) Pokud nastavíte nejkratší délku programu, doporučujeme snížit množství prádla. Spotřebič lze plně naložit, výsledky praní však mohou být méně uspokojivé.
www.aeg.com Stupeň suchosti Druh tkaniny Náplň Bavlna a len až do 6 kg (koupací pláště, osušky, atd.
ČESKY Stupeň su‐ chosti Druh tkaniny Náplň Ry‐ Doporučená (kg) chlos délka chodu t (min) odstř eďo‐ vání (ot/ min) K uložení Bavlna a len Pro prádlo k ulo‐ (koupací pláště, osušky, atd.
www.aeg.com 9. NASTAVENÍ 9.1 Dětská bezpečnostní pojistka Díky této funkci můžete zabránit dětem, aby si hrály s ovládacím panelem. • Funkci zapnete či vypnete současným stisknutím tlačítek Skvrny/ Předpírka a Odložený start, dokud se nezobrazí nebo na ukazatel nezhasne na displeji. Tuto funkci lze zapnout: • Po stisknutí tlačítka Start/Pauza: všechna tlačítka i volič programů jsou vypnutá (kromě tlačítka On/Off). • Před stisknutím tlačítka Start/Pauza: spotřebič nelze spustit.
ČESKY Kontrolka tlačítka Start/Pauza bliká. 2. Otočte voličem programu na potřebný program. Rozsvítí se kontrolka programu. Na displeji se zobrazí maximální náplň, výchozí teplota, maximální rychlost odstřeďování, ukazatele fází programu a délka programu. 3. V případě potřeby stiskněte tlačítka Teplota a Odstřeďování a změňte teplotu vody a rychlost odstřeďování. 4. V případě potřeby stiskněte příslušná tlačítka a přidejte nějaké funkce nebo nastavte odložený start.
www.aeg.com 4. Pří použití tekutého pracího prostředku otočte klapku dolů. Klapka pro práškový nebo tekutý prací prostředek. Vždy se řiďte pokyny na balení pracích prostředků. Doporučujeme však nepřekračovat maximální vyznačené množství ( ). Toto množství však zaručí nejlepší výsledky praní. V případě potřeby po pracím programu odstraňte z dávkovače zbytky pracího prostředku. S klapkou DOLE: • Nepoužívejte gelové nebo husté tekuté prací prostředky.
ČESKY zobrazovat procentuální ukazatel pracího prostředku. Program se spustí a dvířka se zablokují. Na displeji se zobrazí ukazatel . Před naplněním spotřebiče vodou může krátce pracovat vypouštěcí čerpadlo. 10.8 Spuštění programu s odloženým startem 1. Opakovaně stiskněte tlačítko Odložený start, dokud se na displeji nezobrazí požadovaný čas prodlevy. Rozsvítí se kontrolka . 2. Stiskněte tlačítko Start/Pauza. Spotřebič spustí odpočet do odloženého startu.
www.aeg.com 10.11 Přerušení programu a změna funkcí Při spuštěném programu můžete změnit pouze určité funkce: 1. Stiskněte tlačítko Start/Pauza. Příslušný ukazatel začne blikat. 2. Změňte funkce. Údaje poskytované na displeji se změní odpovídajícím způsobem. 3. Stiskněte opět tlačítko Start/Pauza. Prací program bude pokračovat. 10.12 Zrušení probíhajícího programu 1. Stisknutím tlačítka On/Off zrušíte program a vypnete spotřebič. 2. Stisknutím tlačítka On/Off opětovně zapnete spotřebič.
ČESKY 1. V případě potřeby stiskněte tlačítko Odstřeďování, abyste snížili rychlost odstřeďování navrženou spotřebičem. 2. Stiskněte tlačítko Start/Pauza: • Pokud jste nastavili , spotřebič vypustí vodu a odstředí prádlo. • Pokud jste nastavili pouze vypustí vodu. Ukazatel funkce nebo , spotřebič zhasne, zabliká a poté zatímco ukazatel zhasne. 3. Po dokončení programu a zhasnutí ukazatele zablokování dvířek můžete dvířka otevřít. 4. Stisknutím tlačítka On/Off na několik sekund vypněte spotřebič.
www.aeg.com displeji aktualizuje v krocích po 0,5 kg a odpovídajícím způsobem se aktualizuje také délka programu. 6. Zavřete dvířka. 7. Do příslušných komor nadávkujte prací prostředek a přísady. 11.2 Praní a sušení automatické stupně 1. Opakovaně stiskněte tlačítko Stupeň sušení, dokud se na displeji nezobrazí požadovaný stupeň suchosti. Na displeji se zobrazí příslušné ukazatele: a. K žehlení: pro bavlněné prádlo; b. K uložení: pro bavlněné a syntetické prádlo; c.
ČESKY 12.1 Příprava na sušení 1. Stisknutím tlačítka On/Off na několik sekund zapněte spotřebič. S programem pouze k sušení se na displeji nezobrazí hmotnost náplně prádla a funkce odhadu PROSENSE je vypnutá. 2. Postupně naplňte prádlo. 3. Otočte voličem programu na program vhodný k sušení daného prádla. 4. Dvojím stisknutím tlačítka Mód vyřadíte fázi praní a spotřebič provede pouze sušení. Kontrolka Sušení svítí. Na displeji se opět zobrazí ukazatele a .
www.aeg.com 13. VLÁKNA V TKANINÁCH Během prací nebo sušicí fáze mohou určité typy tkanin (utěrky, vlněné prádlo či svetry) pouštět vlákna. Uvolněná vlákna se mohou během dalšího programu přichytit na tkaniny. Toto riziko se zvyšuje u technických tkanin. Abyste zabránili uvolňování vláken vašeho prádla, doporučujeme následující: • • • • Neperte tmavé tkaniny poté, co jste vyprali a usušili světlé barevné prádlo (ručníky, vlněné prádlo a mikiny), a opačně.
ČESKY Takovéto skvrny doporučujeme předem ošetřit před vložením příslušných kusů prádla do spotřebiče. K dispozici jsou speciální odstraňovače skvrn. Použijte speciální odstraňovač skvrn vhodný pro daný druh skvrny a tkaniny. 14.3 Prací prostředky a ostatní přípravky • • • • • Používejte výhradně prací prostředky a ostatní přípravky určené speciálně pro pračky: – práškové prací prostředky pro všechny druhy tkanin, s výjimkou jemných tkanin.
www.aeg.com • = Oblečení nelze sušit v bubnové sušičce. 14.9 Délka sušicího programu Doba sušení se může lišit podle: • rychlosti závěrečného odstředění • stupně suchosti • druhu prádla • hmotnosti náplně 14.10 Přídavné sušení Jestliže je prádlo na konci sušicího programu stále vlhké, přidejte znovu program krátkého sušení. 14.11 Všeobecné rady Průměrné doby sušení naleznete v kapitole „Sušicí programy“. S přibývajícími zkušenostmi budete prádlo sušit lépe.
ČESKY 15.4 Těsnění dvířek 35 2. Odstraňte horní část komory na přísady, abyste usnadnili čištění, a vypláchněte ji pod tekoucí teplou vodou, abyste odstranili jakékoliv stopy nahromaděného pracího prostředku. Po vyčištění vraťte horní část na místo. Pravidelně kontrolujte těsnění a odstraňte všechny předměty zachycené uvnitř. 15.5 Čištění bubnu Pravidelně kontrolujte buben, zda se na něm netvoří stopy rzi. K úplnému vyčištění: 1. Vyčistěte buben pomocí speciálního přípravku na nerezovou ocel.
www.aeg.com 15.7 Čištění vypouštěcího čerpadla VAROVÁNÍ! Vytáhněte zástrčku ze zásuvky. Filtr vypouštěcího čerpadla pravidelně kontrolujte a čistěte. Vypouštěcí čerpadlo vyčistěte, když: • Spotřebič nevypouští vodu. • Buben se neotáčí. • Spotřebič vydává nezvyklý hluk z důvodu ucpaného vypouštěcího čerpadla. • Na displeji se zobrazí výstražný kód 4. Otevřete filtr otočením o 180 stupňů proti směru hodinových ručiček, ale nevyjímejte ho. Nechte vodu vytéct. .
ČESKY 37 neotáčí, obraťte se na autorizované servisní středisko. 2 1 10. Vyčistěte filtr pod tekoucí vodou. Když vypustíte vodu pomocí nouzového vypouštění, je nutné vypouštěcí systém opět aktivovat: a. Do komory pro hlavní praní dávkovače pracího prostředku nalijte dva litry vody. b. Spusťte program na vypouštění vody. 15.8 Čištění přívodní hadice a filtru přívodního ventilu Doporučuje se občas čistit filtry přívodní hadice a ventilu, abyste odstranili časem usazené nánosy: 11.
www.aeg.com 15.9 Nouzové vypouštění Pokud spotřebič nemůže vypustit vodu, proveďte postup popsaný v odstavci „Čištění vypouštěcího filtru“. Je-li to nutné, čerpadlo vyčistěte. Když vypustíte vodu pomocí nouzového vypouštění, je nutné vypouštěcí systém opět aktivovat: 3. Vyčistěte filtr ventilu na zadní straně spotřebiče zubním kartáčkem. 1. Do komory pro hlavní praní dávkovače pracího prostředku nalijte dva litry vody. 2. Spusťte program na vypouštění vody. 15.
ČESKY • • • - Spotřebič se neplní správně vodou. Znovu zapněte spotřebič stisknutím tlačítka Start/Pauza. Po pěti sekundách se odblokují dvířka. • - Napájení ze sítě je nestabilní. Vyčkejte, dokud nebude napájení v síti stabilní. • - Chyba v komunikaci mezi elektronickými prvky spotřebiče. Spotřebič vypněte a znovu zapněte. Program se nedokončil správně nebo se spotřebič vypnul příliš brzy. Pokud se výstražný kód na displeji zobrazí znovu, kontaktujte autorizované servisní středisko.
www.aeg.com Problém Možné řešení • • Spotřebič se neplní vo‐ dou správně. • • • • Spotřebič se naplní vo‐ • dou a okamžitě se vypus‐ tí. • • Spotřebič nevypouští vo‐ du. • • • • Odstřeďovací fáze ne‐ probíhá nebo prací pro‐ gram trvá déle než obvy‐ kle. • • • • Na podlaze je voda. • • • Nelze otevřít dvířka spotřebiče. • • • • Zkontrolujte, zda je vodovodní kohoutek otevřený. Ujistěte se, že není příliš malý tlak na přívodu vody.
ČESKY Problém Možné řešení • Spotřebič vydává nezvy‐ klý hluk a vibruje. Délka programu se zvy‐ šuje či snižuje během provádění programu. Neuspokojivé výsledky praní. 41 • • Ujistěte se, že je spotřebič správně vyrovnán. Viz „Pokyny k instalaci“. Ujistěte se, že jste odstranili veškerý obalový materiál a přepravní šrouby. Viz „Pokyny k instalaci“. Do bubnu přidejte více prádla. Může se jednat o příliš ma‐ lou náplň.
www.aeg.com Po kontrole spotřebič zapněte. Program bude pokračovat od okamžiku, ve kterém byl přerušen. Pokud se problém objeví znovu, obraťte se na autorizované servisní středisko. Pokud se na displeji zobrazí jiné výstražné kódy. Vypněte a zapněte spotřebič. Pokud problém přetrvává, obraťte se na autorizované servisní středisko. 16.3 Nouzové otevření dvířek V případě výpadku napájení nebo funkční poruchy zůstanou dvířka spotřebiče zablokovaná.
ČESKY 43 Během pracího programu může technologie ProSense upravovat délku a hodnoty spotřeby. Další podrobnosti viz odstavec „Detekce náplně ProSense“ v kapitole „Denní používání“. Programy Náplň (kg) Spotřeba energie (kWh) Spotřeba vody (litry) Přibližná délka pro‐ gramu (minuty) Bavlna 60 °C 10 1.70 90 230 Bavlna Eco Úsporný program pro bavlnu 10 0.86 61 265 Bavlna 40 °C 10 1.10 90 220 Syntetika 40 °C 4 0.72 55 155 Jemné 40 °C 4 0.60 59 89 Vlna / Ruční praní 30 °C 2 0.
www.aeg.com 19. PŘÍSLUŠENSTVÍ 19.1 Dostupné na www.aeg.com/shop nebo u autorizovaného prodejce 19.3 Podstavec se zásuvkou Pouze správné příslušenství schválené společností AEG zajistí bezpečnostní standardy spotřebiče. Při použití neschválených součástí budou jakékoliv záruční nároky neplatné. 19.2 Souprava fixovacích destiček Pokud spotřebič instalujete na podstavec, zajistěte jej pomocí fixovacích destiček. Slouží ke zvýšení vašeho spotřebiče a usnadňuje vkládání a vyjímání prádla.
ČESKY 45
www.aeg.
ČESKY 47
157009821-B-292017 www.aeg.