User manual

After some minutes from
the end of the
programme, the energy
saving function
automatically deactivates
the appliance.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
12. DAILY USE - WASHING & DRYING
WARNING!
Refer to Safety chapters.
12.1 NON-STOP programme
You can wash and dry your laundry
setting a «non stop-programme».
Proceed as follows:
1. Press button On/Off for some
seconds to activate the appliance .
2. Load the laundry one item at a time.
3. Put the detergent and the additives
in the appropriate compartment.
4. Turn the programme dial to the
washing programme. The display
shows the default temperature and
spin. If necessary, change them
according to your laundry.
5. Set the available options.
12.2 Washing and Drying at
automatic levels
1. Touch button Auto Dry repeatedly
until the display shows the required
dryness level. The indicators above
the button illuminate accordingly:
a. IRON DRY level: 1 indicator on -
for cotton items;
b. CUPBOARD DRY level: 2
indicators on - for cotton and
synthetic items;
c. EXTRA DRY level: 3 indicators
on - for cotton items.
The display shows that the appliance is
ready to start.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pause to start the
programme.
The display shows the door locked
indicator and the programme in progress
indicator and, alternatively, the
drying time and the time of the cycle
end.
The text bar tells that the appliance is
operating.
The display shows regularly a new time
value.
12.3 Washing and Timed
Drying
1. Touch button Time Dry repeatedly to
set the time value (see the «Drying
Programme» table).
The display shows 15 minutes for cottons
and synthetics programmes while starts
from 13 minutes for wool programme.
Each time you press this button the time
value increases by 5 minutes. The display
shows the set time value.
2. Press Start/Pause to start the
programme.
On the display appear the door locked
and the programme in progress
indicators.
The display shows, alternatively, the
programme duration and the time of the
cycle end.
The text bar tells that the appliance is
operating.
ENGLISH
25