L 98699 FL CS PRAČKA SK PRÁČKA NÁVOD K POUŽITÍ NÁVOD NA POUŽÍVANIE 2 39
www.aeg.com OBSAH 4 5 7 7 8 13 17 17 17 18 19 20 21 22 24 29 32 BEZPEČNOSTNÍ INFORMACE TECHNICKÉ INFORMACE POPIS SPOTŘEBIČE VNITŘNÍ PŘÍSLUŠENSTVÍ OVLÁDACÍ PANEL PRACÍ PROGRAMY PŘED PRVNÍM POUŽITÍM POUŽITÍ SPOTŘEBIČE ZAPNUTÍ SPOTŘEBIČE A NASTAVENÍ PROGRAMU VKLÁDÁNÍ PRÁDLA POUŽITÍ PRACÍHO PROSTŘEDKU A PŘÍSAD SPUŠTĚNÍ PROGRAMU NA KONCI PROGRAMU UŽITEČNÉ RADY A TIPY ČIŠTĚNÍ A ÚDRŽBA ODSTRAŇOVÁNÍ ZÁVAD A SERVIS INSTALACE POZNÁMKY K OCHRANĚ ŽIVOTNÍHO PROSTŘEDÍ Recyklujte materiály označené symbolem .
ČESKY 3 PRO DOKONALÉ VÝSLEDKY Děkujeme vám, že jste si zvolili výrobek značky AEG. Aby vám bezchybně sloužil mnoho let, vyrobili jsme jej s pomocí inovativních technologií, které usnadňují život, a vybavili jsme jej funkcemi, které u obyčejných spotřebičů nenajdete. Stačí věnovat pár minut čtení a zjistíte, jak z něho získat co nejvíce. PŘÍSLUŠENSTVÍ A SPOTŘEBNÍ MATERIÁL V e-shopu společnosti AEG naleznete vše, co potřebujte k udržování všech vašich spotřebičů AEG v perfektním stavu.
www.aeg.com BEZPEČNOSTNÍ INFORMACE Před instalací a použitím si pečlivě přečtěte tento návod: • Abyste ochránili svoji bezpečnost i svůj maje‐ tek • Abyste pomáhali chránit životní prostředí • Abyste spotřebič správně používali. Pokyny vždy uchovávejte spolu se spotřebičem i pro případ, že byste jej přestěhovali nebo předali jiné osobě. Výrobce nezodpovídá za škody způsobené ne‐ správnou instalací či chybným používáním.
ČESKY Pokud je potřeba vnitřní osvětlení vy‐ měnit, kontaktujte servisní středisko. Před výměnou vnitřního osvětlení vy‐ táhněte zástrčku ze zásuvky. INSTALACE • Spotřebič je těžký, a proto buďte při jeho stě‐ hování opatrní. • Spotřebič nepřepravujte bez přepravních šroubů, mohlo by tak dojít k poškození vnitřních součástí a následným únikům nebo poruchám. • Poškozený spotřebič neinstalujte ani nezapo‐ jujte. • Ujistěte se, že jste odstranili veškerý obalový materiál a přepravní šrouby.
www.aeg.com Studená voda Přívod vody 1) Maximální množství prádla Bavlna Rychlost otáček Maximální 1) Přívodní hadici připojte ke kohoutku se závitem 3/4".
ČESKY 7 POPIS SPOTŘEBIČE 1 2 3 9 10 11 4 5 6 12 7 13 8 1 Horní deska 8 Nožičky pro vyrovnání spotřebiče 2 Dávkovač mycího prostředku 9 Vypouštěcí hadice 3 Ovládací panel 4 Držadlo dvířek 10 Vodovodní přípojka 5 Vnitřní osvětlení 12 Přepravní šrouby 6 Typový štítek 13 Nožičky pro vyrovnání spotřebiče 11 Napájecí kabel 7 Vypouštěcí čerpadlo VNITŘNÍ PŘÍSLUŠENSTVÍ 1 2 1 Klíč K odstranění přepravních šroubů.
www.aeg.com OVLÁDACÍ PANEL 1 2 3 4 ECO SUPER ECO 5 20 Min.
ČESKY 9 DISPLEJ 3 A J A I B H G C F D E Textový pruh: • Zobrazuje pokyny k používání spotřebiče. • Zobrazuje stav a fázi programu. • Zobrazuje výstražné zprávy. Řiďte se pokyny v části „Odstraňování závad“. Tyto symboly se na displeji zobrazí, když je nastavena příslušná fáze nebo funkce. B Dětská pojistka C Zablokovaná dvířka Když se zobrazí tento symbol, nelze dvířka otevřít. Dvířka můžete otevřít až poté, co symbol zmizí.
www.aeg.com • Konec programu Na displeji se objeví nula. Tato část se zobrazí pouze když jsou dvířka otevřená - viz kapitola „Vkládání prá‐ dla“. Maximální náplň pro daný program Hmotnost prádla E Stavové čárky se plní dle hmotnosti prádla. Indikátor se zcela naplní, když vložíte maximální náplň. Chcete-li nastavit funkci • Prázdné stavové čárky se zobrazí, když je příslušná funkce u zvoleného progra‐ mu dostupná. Pokud se stavové čárky nezobrazí, znamená to, že funkce není dostupná.
ČESKY J Výchozí teplota u zvoleného programu. Studená lázeň TLAČÍTKO PÁRA 4 Stisknutím tlačítka 4 nastavte stupeň páry. Tento krok je dostupný pouze u programů obsa‐ hujících funkci páry. Délka trvání fáze páry se mění podle vašeho výběru. TLAČÍTKA PAMĚTI 5 Chcete-li uložit program do paměti nebo nastavit program uložený v paměti, dotkněte se jednoho z tlačítek 5 . Uložení programu do paměti 1. Stisknutím tlačítka 1 zapněte spotřebič. 2. Pootočte voličem programů ( 2 ) na váš oblíbený program.
www.aeg.com • Zapnutí funkce Zastavení máchání . Nastavte tuto funkci, abyste zabránili pomač‐ kání tkaniny. Spotřebič po dokončení progra‐ mu nevypustí vodu. TLAČÍTKO TEPLOTA 12 Stisknutím tlačítka 12 změníte výchozí teplotu. Symboly - - - a = studená voda FUNKCE ZVUKOVÉ SIGNALIZACE Zvukovou signalizaci uslyšíte, když: • Zapnete spotřebič. • Vypnete spotřebič. • Stisknete tlačítka. • Dokončí se program. • Dojde k závadě či poruše na spotřebiči.
ČESKY 13 PRACÍ PROGRAMY Program Teplota Druh náplně Hmotnost náplně Popis programu Funkce Bavlna 95 °C - studená Silně zašpiněná bílá a barevná bavlna. Maximální náplň 9 kg Praní Máchání Dlouhé odstředění Snížení rychlosti odstředění Zastavení má‐ chání Skvrny1) Předpírka2) Namáčení Extra máchání Time save3) 95 °C - studená Normálně zašpině‐ ná bílá a barevná bavlna.
www.aeg.com Program Teplota Druh náplně Hmotnost náplně Popis programu Funkce Vlna / hedvábí 40 °C – studená Máchání Krátké odstředění Prací program pro vlnu, která se může prát v pračce, i pro ručně prané vlněné oděvy a jemné tka‐ niny se symbolem „ruční praní“. Maximální náplň 2 kg Praní Máchání Krátké odstředě‐ ní Snížení rychlosti odstředění Zastavení má‐ chání 60° - 30° Máchání Krátké odstředění Speciální program pro jednu syntetic‐ kou deku, přikrývku, přehoz přes postel apod.
ČESKY 15 Program Teplota Druh náplně Hmotnost náplně Popis programu Funkce 20 min - 3 kg 40° nebo 30° Rychlé praní spor‐ tovních oděvů nebo lehce zašpiněných či jednou nošených bavlněných a synte‐ tických oděvů. Maximální náplň 3 kg Praní Snížení rychlosti Máchání odstředění Krátké odstředě‐ ní SUPER ECO 0° Směsové tkaniny (bavlněné a synte‐ tické prádlo)8).
www.aeg.com 2) Pára - Osvěžení Tento cyklus odstraní z prádla nepříjemný pach. Bavlněné a syntetické prádlo. až do 1.5 kg Bavlněné a syntetické prádlo. až do 1.5 kg Napařování neodstraní zvířecí pachy. 2) Pára Proti Pomačkání Tento program pomáhá odstranit po‐ mačkání prádla. Parní program lze použít u usušeného, vypraného nebo pouze jedinkrát nošeného prádla. Pomocí těchto programů můžete snížit zmačkání prádla, odstranit nepříjemné pachy a získat měkké prádlo.
ČESKY Programy Standardní 40 °C program pro bavlnu Náplň (kg) Spotřeba ener‐ gie (kWh) Spotřeba vody (litry) 4.5 0.46 40 17 Přibližná délka Zbytková programu (mi‐ vlhkost (%)1) nuty) 178 43 1) Na konci odstřeďovací fáze. Model Režim vypnuto (W) Režim zapnuto (W) 0.05 0.05 L 98699 FL PŘED PRVNÍM POUŽITÍM 1. 2. Aktivujte vypouštěcí systém přidáním dvou litrů vody do komory pro hlavní praní dávko‐ vače pracího prostředku.
www.aeg.com 2. 3. 4. Otočte voličem programů ( 2 ) na požado‐ vaný program nebo se dotkněte jednoho z tlačítek 5 a nastavte program uložený v paměti. Rozsvítí se kontrolka programu. 5. Kontrolka tlačítka 6 bliká červeně. Na displeji se zobrazí výchozí teplota a odstřeďování. V případě potřeby stiskněte tlačítka 12 a 11 a změňte teplotu vody a rychlost odstřeďování. V případě potřeby stiskněte další tlačítka a přidejte nějaké funkce nebo nastavte odlo‐ žený start.
ČESKY 19 POUŽITÍ PRACÍHO PROSTŘEDKU A PŘÍSAD Komora pracího prostředku pro fázi předpírky a program namáčení. Prací prostředek pro předpírku a namáčení přidejte před spuštěním progra‐ mu. Komora pracího prostředku pro fázi praní. Pokud používáte tekutý prací prostředek, odměřte jej okamžitě před spuště‐ ním programu. Komora pro přísady (aviváž, škrob). Produkt vložte do komory před spuštěním programu. Toto je značka maximálního množství pro tekuté přísady. Komora pro prostředek na odstraňování skvrn.
www.aeg.com 3. Pří použití práškového pracího prostředku otočte klapku nahoru. 4. Pří použití tekutého pracího prostředku oto‐ čte klapku dolů. S klapkou DOLE: – Nepoužívejte gelové nebo husté te‐ kuté prací prostředky. – Nepoužívejte více tekutého pracího prostředku, než je uvedeno na klap‐ ce. – Nenastavujte fázi předpírky. – Nepoužívejte funkci odloženého star‐ tu. 5. 6. Odměřte prací prostředek a aviváž. Opatrně zavřete dávkovač pracího prostředku.
ČESKY 21 PŘERUŠENÍ PROGRAMU OTEVŘETE DVEŘE 1. Stiskněte tlačítko 6 . Kontrolka začne bli‐ kat. Zatímco probíhá program nebo odpočet odlože‐ ného startu, jsou dvířka spotřebiče zablokovaná. 2. Znovu stiskněte tlačítka 6 . Prací program bude pokračovat. Otevření dvířek spotřebiče: ZRUŠENÍ PROGRAMU 1. Stisknutím tlačítka 1 zrušíte program a vypnete spotřebič. 2. Opětovným stisknutím tlačítka 1 zapnete spotřebič. Nyní můžete zadat nový prací program. 1. 2. 3.
www.aeg.com UŽITEČNÉ RADY A TIPY VKLÁDÁNÍ NÁPLNĚ PRÁDLA PRACÍ PROSTŘEDKY A PŘÍSADY • Prádlo rozdělte na: bílé, barevné, syntetické, jemné a vlněné. • Řiďte se pokyny na etiketách praného prádla. • Neperte současně bílé a barevné prádlo. • Některé barevné oblečení může během první‐ ho praní pouštět barvu. Doporučujeme proto, abyste jej při prvním praní prali odděleně. • Zapněte knoflíky polštářů, zatáhněte zipy, za‐ pněte háčky a patenty. Svažte pásky.
ČESKY 23 Tvrdost vody Úroveň Typ °dH °T.H.
www.aeg.com ČIŠTĚNÍ A ÚDRŽBA UPOZORNĚNÍ Před čištěním spotřebiče jej odpojte z elektrické sítě. ODSTRAŇOVÁNÍ VODNÍHO KAMENE Voda, která se při praní používá, obsahuje vodní kámen. V případě potřeby použijte pro odstraně‐ ní vodního kamene změkčovač vody. Použijte výrobek speciálně určený pro pračky. Dodržujte pokyny výrobce uvedené na balení těchto výrobků. Tento proces proveďte odděleně od praní prádla. ČIŠTĚNÍ VNĚJŠÍCH PLOCH POZOR Nepoužívejte alkohol, rozpouštědla ani chemické výrobky.
ČESKY 25 DÁVKOVAČ PRACÍHO PROSTŘEDKU Čištění dávkovače pracího prostředku: 1 1. 2. Stiskněte páčku. Vytáhněte dávkovač ven. 3. 4. Odstraňte horní část komory na přísady. Všechny části omyjte vodou. 5. 6. Vyčistěte výklenek dávkovače kartáčkem. Zasuňte dávkovač zpět do výklenku. 2 VYPOUŠTĚCÍ ČERPADLO Vypouštěcí čerpadlo pravidelně kontro‐ lujte a čistěte. • Na displeji se zobrazí výstražný kód značící problémy s vypouštěním vody. UPOZORNĚNÍ 1. Vytáhněte zástrčku ze zásuvky. 2.
www.aeg.com 2. Klapku odstraňte jejím vytažením. 3. Pod výklenek vypouštěcího čerpadla polož‐ te nádobu, do které zachytíte vytékající vo‐ du. Stiskněte dvě páčky a vytáhněte vypouštěcí hadici ven, aby mohla voda vytéct. 4. 5. 1 6. Když je nádoba plná vody, zasuňte vypou‐ štěcí hadici zpět a nádobu vyprázdněte. Kroky 4 a 5 opakujte, dokud z vypouštěcího čerpadla nevytéká žádná voda. Zatáhněte vypouštěcí hadici zpět a otoče‐ ním filtrem ji odstraňte. 2 2 1 7.
ČESKY FILTR V PŘÍVODNÍ HADICI A FILTR PŘÍVODNÍHO VENTILU Tyto filtry může být nutné vyčistit, když: • Spotřebič se neplní vodou. • Spotřebič se plní vodou příliš dlouho. 27 • Kontrolka tlačítka 6 bliká a na displeji se zo‐ brazí příslušný výstražný kód. Řiďte se poky‐ ny v „Odstraňování závad“. UPOZORNĚNÍ Vytáhněte zástrčku ze zásuvky. Čistění filtrů na přívodu vody: 1. 2. 3. 4. 5. Odstraňte přívodní hadici za spotřebičem. Vyčistěte filtr ventilu tvrdým kartáčkem ne‐ bo utěrkou. 6.
www.aeg.com UPOZORNĚNÍ Před opětovným použitím spotřebiče se ujistěte, že je okolní teplota vyšší než 0 °C. Výrobce neručí za škody způsobené ní‐ zkými teplotami.
ČESKY 29 ODSTRAŇOVÁNÍ ZÁVAD A SERVIS Spotřebič se nespustí nebo se zastaví během provozu. Před kontaktováním servisního střediska se po‐ kuste závadu odstranit sami (viz tabulka). U některých problémů zazní zvuková signalizace a na displeji se zobrazí výstražná zpráva: Problém Možná příčina Na displeji se zobra‐ Vodovodní kohoutek je zuje zpráva vyzývají‐ zavřený. cí ke kontrole kohout‐ ku: spotřebič se ne‐ plní vodou. UPOZORNĚNÍ Před kontrolou spotřebič vypněte.
www.aeg.com Problém Fáze odstřeďování nefunguje. Možná příčina Možné řešení Je zapnutá funkce Zastavení máchání . Nastavte vypouštěcí program. Fáze odstřeďování je vypnu‐ tá. Nastavte program odstřeďování. Filtr vypouštěcího čerpadla je Vyčistěte filtr vypouštěcího čerpadla. zanesený. Řiďte se částí „Čištění a údržba“. Problémy s vyvážením ná‐ plně prádla. Nespustil se program. Zástrčka není zasunutá do zásuvky. Ručně rozložte prádlo v bubnu a zno‐ vu spusťte fázi odstřeďování.
ČESKY Problém Možná příčina Možné řešení Nastavili jste nesprávnou te‐ plotu. Nastavte správnou teplotu. Příliš velká náplň prádla. Snižte náplň prádla. Vnitřní osvětlení ne‐ svítí. Spálená žárovka. Pokud je potřeba osvětlení vyměnit, kontaktujte servisní středisko. Po parním programu je oblečení vlhké. Spotřebič není řádně vyrov‐ naný. Zkontrolujte vyrovnání spotřebiče a upravte jej zvýšením nebo snížením nožiček. Po parním programu není oblečení dosta‐ tečně vyhlazené.
www.aeg.com INSTALACE SOUPRAVA FIXOVACÍCH DESTIČEK (405517114) Dostupná u vašeho autorizovaného prodejce. Pokud spotřebič instalujete na podstavec, zaji‐ stěte jej pomocí fixovacích destiček. Řiďte se pokyny dodanými s příslušnou soupra‐ vou. VYBALENÍ 1. Používejte rukavice. Odstraňte vnější fólii. V případě potřeby použijte řezák. 2. 3. Odstraňte kartónový vršek. Odstraňte polystyrénový obalový materiál. 4. Odstraňte vnitřní fólii. 5. Otevřete dvířka spotřebiče.
ČESKY 33 6. Na podlahu za spotřebič položte jeden kus polystyrénového obalového prvku. Opatrně na něj položte spotřebič jeho zadní stranou. Nepoškoďte hadice. 7. Odstraňte polystyrénovou ochranu ze spod‐ ní části spotřebiče. 8. Zcela očistěte a vysušte spodní stranu spotřebiče. Nepoužívejte alkohol, rozpou‐ štědla ani chemické výrobky. 9. Správně rozlište různé velikosti a umístění tlumicích podložek.
www.aeg.com 10. – Z tlumicích podložek stáhněte lepicí pro‐ x4 A užek. – Všechny čtyři podložky připevněte na spodní stranu spotřebiče. Viz obrázek. – Ujistěte se, že jsou podložky bezpečně připevněné. Tlumicí podložky připevňujte při pokojo‐ vé teplotě. B 11. Postavte spotřebič do svislé polohy. 12. Vyndejte napájecí kabel a vypouštěcí hadici z držáků. 13. Pomocí přiloženého klíče vyšroubujte tři šrouby. Vytáhněte plastové distanční kolí‐ ky.
ČESKY 35 14. Plastové krytky zasuňte do otvorů. Tyto krytky naleznete v sáčku s návodem k pou‐ žití. UPOZORNĚNÍ Před instalací spotřebiče odstraňte vše‐ chny přepravní šrouby a obaly. Obaly a přepravní šrouby doporučuje‐ me uschovat pro případné další stěho‐ vání spotřebiče. UMÍSTĚNÍ A VYROVNÁNÍ • Instalujte spotřebič na tvrdé rovné podlaze. • Ujistěte se, koberec nebrání proudění vzdu‐ chu pod spotřebičem. • Zkontrolujte, zda se spotřebič nedotýká zdi ani jiných zařízení či kusů nábytku.
www.aeg.com PŘÍVODNÍ HADICE • Připojte hadici ke spotřebiči. Přívodní hadicí otáčejte pouze doleva či doprava. Povolte kru‐ hovou matici a nastavte ji do správné polohy. 20 O 45 O • Přívodní hadici připojte ke kohoutku se stude‐ nou vodou a závitem 3/4". POZOR Ujistěte se, že na jejích spojích nedo‐ chází k úniku vody. Pokud je přívodní hadice příliš krátká, nenastavujte ji ani nepoužívejte prodlu‐ žovací hadice. Kontaktujte servisní středisko ohledně výměny přívodní ha‐ dice.
ČESKY 37 Pomocí plastového kolena. • Na kraji umyvadla. • Ujistěte se, že se plastové koleno nemůže bě‐ hem vypouštění spotřebiče pohybovat. Přivaž‐ te koleno k vodovodnímu kohoutku nebo zdi. • Ke stoupacímu potrubí s průduchem. m Řiďte se obrázkem. Přímo do odpadní trub‐ ky ve výšce minimálně 60 cm a maximálně 100 cm. Konec vypouštěcí hadice musí být odvětrán tj. vnitřní průměr odpadní trubky mu‐ sí být větší než vnější průměr vypouštěcí hadi‐ ce. Bez plastového kolena. • K přípojce sifonu.
www.aeg.com Hadici lze prodloužit o maximálně 400 cm. V případě prodloužení hadice nebo ostatních hadic kontaktujte servisní středisko.
SLOVENSKY 39 OBSAH 41 42 44 44 45 50 54 54 54 55 56 57 58 59 60 65 68 BEZPEČNOSTNÉ POKYNY TEHNIČNE INFORMACIJE POPIS VÝROBKU VNÚTORNÉ PRÍSLUŠENSTVO OVLÁDACÍ PANEL PRACIE PROGRAMY PRED PRVÝM POUŽITÍM POUŽÍVANIE SPOTREBIČA ZAPNUTIE SPOTREBIČA A NASTAVENIE PROGRAMU VLOŽENIE BIELIZNE POUŽÍVANIE PRACÍCH PROSTRIEDKOV A PRÍDAVNÝCH PROSTRIEDKOV SPUSTENIE PROGRAMU PO SKONČENÍ PROGRAMU UŽITOČNÉ RADY A TIPY OŠETROVANIE A ČISTENIE RIEŠENIE PROBLÉMOV A ÚDRŽBA INŠTALÁCIA OCHRANA ŽIVOTNÉHO PROSTREDIA Materiály označen
www.aeg.com PRE DOKONALÉ VÝSLEDKY Ďakujeme vám, že ste si vybrali tento výrobok značky AEG. Vytvorili sme ho tak, aby vám poskytol dokonalý výkon po mnoho rokov, za pomoci inovačných technológií, ktoré uľahčujú život vlastností, ktoré u bežných spotrebičoch nenájdete. Venujte, prosím, niekoľko minút prečítaniu si tohto návodu, aby ste svoj spotrebič využili čo najlepšie.
SLOVENSKY 41 BEZPEČNOSTNÉ POKYNY Pred inštalovaním a použitím si pozorne prečítaj‐ te tento návod: • V záujme vašej bezpečnosti a ochrany vášho majetku • V záujme ochrany životného prostredia • V záujme správnej obsluhy spotrebiča. Tieto pokyny vždy uchovávajte v blízkosti spotre‐ biča, a to aj vtedy, ak sa presťahujete alebo spo‐ trebič darujete inej osobe. Výrobca nie je zodpovedný za škody spôsobené nesprávnou inštaláciou a používaním.
www.aeg.com INŠTALÁCIA • Spotrebič je ťažký, pri jeho premiestňovaní si dajte pozor. • Spotrebič nepresúvajte bez prepravných skru‐ tiek, mohlo by dôjsť k poškodeniu vnútorných súčastí, úniku vody alebo prevádzkovým pro‐ blémom. • Poškodený spotrebič neinštalujte ani nepripá‐ jajte. • Uistite sa že ste odstránili všetok obal a pre‐ pravné skrutky. • Pred inštaláciou skontrolujte, či je zástrčka od‐ pojená od zásuvky elektrickej siete.
SLOVENSKY 43 Studená voda Prívod vody 1) Maximálna hmotnosť náplne Bavlna Rýchlosť odstreďovania Maximálna 1) Prívodnú hadicu zapojte k vodovodnému kohútiku s 3/4" závitom. 9 kg 1600 ot./min.
www.aeg.com POPIS VÝROBKU 1 2 3 9 10 11 4 5 6 12 7 13 8 1 Pracovná plocha 8 Nožičky na vyrovnanie spotrebiča 2 Dávkovač pracieho prostriedku 9 Hadica na vypúšťanie vody 3 Ovládací panel 4 Rukoväť dvierok 10 Vodovodná prípojka 5 Vnútorné osvetlenie 12 Prepravné skrutky 6 Typový štítok 13 Nožičky na vyrovnanie spotrebiča 11 Elektrický prípojný kábel 7 Vypúšťacie čerpadlo VNÚTORNÉ PRÍSLUŠENSTVO 1 2 1 Maticový kľúč Na odstránenie prepravných skrutiek.
SLOVENSKY 45 OVLÁDACÍ PANEL 1 2 3 4 ECO SUPER ECO 5 20 Min.
www.aeg.com DISPLEJ 3 A J A I B H G C D F E Textový riadok: • Usmerňuje vás pri používaní spotrebiča. • Zobrazuje stav a fázu programu. • Zobrazuje výstražné hlásenia. Pozri časť „Riešenie problémov“. Symbol sa na displeji zobrazí po nastavení príslušnej fázy alebo funkcie. B Detská poistka C Dvierka zablokované Ak je zobrazený tento symbol, nie je možné otvoriť dvierka. Dvierka môžete otvoriť až vtedy, keď symbol zhasne.
SLOVENSKY 47 • Ukončenie programu Na displeji sa zobrazuje nula. Táto časť sa rozsvieti, iba ak sú dvierka otvorené – prečítajte si časť „Vloženie bie‐ lizne“. Program prania pri maximálnom naplnení Hmotnosť bielizne E Čiarový ukazovateľ sa vypĺňa podľa hmotnosti bielizne. Indikátor sa úplne rozsvieti, keď vložíte maximálnu náplň. Ak potrebujete nastaviť funkciu • Prázdny čiarový ukazovateľ sa zobrazí iba vtedy, keď je príslušná funkcia k di‐ spozícii pre nastavený program.
www.aeg.com J Štandardná teplota daného programu. Studený cyklus TLAČIDLO PARY 4 Dotykom tlačidla 4 nastavíte úroveň pary. To je možné iba pri programoch s dostupnou funk‐ ciou pary. Dĺžka fázy pary sa mení podľa vášho výberu. TLAČIDLÁ PAMÄTE 5 Dotykom niektorého z tlačidiel 5 uložíte pro‐ gram do pamäte alebo nastavíte program ulože‐ ný v pamäti. Uloženie programu do pamäte 1. Stlačením tlačidla 1 spotrebič zapnete. 2. Otočte volič programov ( 2 ) do polohy ob‐ ľúbeného programu.
SLOVENSKY • Znížite maximálnu rýchlosť fázy odstreďova‐ nia programu. Displej zobrazí iba otáčky dostupné pre nastavený program. • Vypnite fázu odstreďovania (funkcia „ Bez od‐ streďovania “). • Zapnete funkciu „ Plákanie stop “. Túto funkciu nastavte vtedy, ak chcete zabrá‐ niť pokrčeniu bielizne. Spotrebič po skončení programu nevypustí vodu. TLAČIDLO TEPLOTA 12 Dotykom tlačidla 12 zmeníte nastavenie na predvolenú teplotu.
www.aeg.com PRACIE PROGRAMY Program Teplota Druh náplne Hmotnosť náplne Popis programu Funkcie Bavlna 95° – Studená voda Biela a farebná bavlna, veľmi zneči‐ stená. Maximálna náplň 9 kg Pranie Plákanie Dlhé odstreďo‐ vanie Zníženie rýchlo‐ sti odstreďova‐ nia Plákanie Stop Škvrny1) Predpieranie2) Namáčanie Extra plákanie Úspora času 3) 95° – Studená voda Biela a farebná bavlna, normálne znečistená.
SLOVENSKY 51 Program Teplota Druh náplne Hmotnosť náplne Popis programu Funkcie Vlna/hodváb 40° – Studená voda Plákanie Krátke odstre‐ ďovanie Na vlnu vhodnú na pranie v práčke, ako aj na vlnené a veľmi jemné tkaniny ozna‐ čené na štítku sym‐ bolom „ručné pra‐ nie“. Maximálna náplň 2 kg Pranie Plákanie Krátke odstre‐ ďovanie Zníženie rýchlo‐ sti odstreďova‐ nia Plákanie Stop 60° - 30° Plákanie Krátke odstre‐ ďovanie Špeciálny program pre jednu syntetickú deku, prikrývku, plachtu a podobne.
www.aeg.com Program Teplota Druh náplne Hmotnosť náplne Popis programu Funkcie 20 min. – 3 kg 40° alebo 30° Rýchle pranie špor‐ tových odevov, mierne zašpinených bavlnených a synte‐ tických odevov ale‐ bo jedenkrát nose‐ ných odevov. Maximálna náplň 3 kg Pranie Plákanie Krátke odstre‐ ďovanie Zníženie rýchlo‐ sti odstreďova‐ nia SUPER ECO 0° Zmesové tkaniny (bavlna a synteti‐ ka)8).
SLOVENSKY 2) Osvieženie parou Tento cyklus odstraňuje pach z oble‐ čenia. Bavlnené a syntetické oblečenie. až do 1.5 kg Bavlnené a syntetické oblečenie. až do 1.5 kg 53 Para neodstraňuje pachy zvierat. 2) Para proti pokrčeniu Tento program pomáha narovnať po‐ krčenú bielizeň. Paru môžete použiť na suchú, vypranú alebo jedenkrát nosenú bielizeň. Tieto progra‐ my dokážu redukovať pokrčenie a zápach a vyhladiť bielizeň. Nepoužívajte žiaden prací prostriedok.
www.aeg.com Programy Štandardný pro‐ gram bavlna 40 °C Náplň (kg) Spotreba ener‐ gie (v kWh) Spotreba vody (litre) 4.5 0.46 40 Približná dĺžka Zvyšková programu (mi‐ vlhkosť (%)1) núty) 178 43 1) Na konci fázy odstreďovania. Model Vypnutý režim (W) Pohotovostný režim (W) 0.05 0.05 L 98699 FL PRED PRVÝM POUŽITÍM 1. 2. Ak chcete zapnúť vypúšťací systém, nalejte 2 litre vody do hlavnej priehradky dávkova‐ ča pracieho prostriedku.
SLOVENSKY 1. Stlačením tlačidla 1 spotrebič zapnete. 2. Otočte ovládač programov ( 2 ) na poža‐ dovaný program alebo dotykom niektorého tlačidla 5 nastavte program uložený do pamäte. Rozsvieti sa ukazovateľ programu. 3. Ukazovateľ tlačidla 6 začne blikať červe‐ nou farbou. Na displeji sa zobrazí predvolená teplota a rýchlosť odstreďovania. V prípade potreby 4. 5. 55 dotykom tlačidla 12 a tlačidla 11 zmeňte teplotu vody a rýchlosť odstreďovania.
www.aeg.com POUŽÍVANIE PRACÍCH PROSTRIEDKOV A PRÍDAVNÝCH PROSTRIEDKOV Priehradka na prací prostriedok pre fázu predpierania a program namáčania. Pridajte prací prostriedok na predpieranie a namáčanie pred spustením pro‐ gramu. Priehradka na prací prostriedok pre fázu prania. Ak používate tekutý prací prostriedok nalejte ho ešte pred spustením progra‐ mu. Priehradka na tekuté prídavné prostriedky (aviváž, škrob). Produkt dajte do priehradky pred spustením programu.
SLOVENSKY 3. V prípade použitia práškového pracieho prostriedku otočte klapku nahor. 4. V prípade použitia tekutého pracieho pro‐ striedku otočte klapku nadol. 57 Pri klapke v polohe NADOL: – Nepoužívajte gélové ani husté tekuté pracie prostriedky. – Nepoužívajte viac tekutého pracieho prostriedku, ako je limit označený na klapke. – Nenastavujte fázu predpierania. – Nenastavujte funkciu odloženého štartu. 5. 6. Pridajte prací a avivážny prostriedok. Dôkladne zatvorte dávkovač umývacieho prostriedku.
www.aeg.com 2. Znova sa dotknite tlačidla 6 . Prací pro‐ gram pokračuje. ZRUŠENIE PROGRAMU 1. Stlačením tlačidla 1 zrušíte program a vy‐ pnete spotrebič. 2. Opätovným stlačením tlačidla 1 spotrebič zapnete. Teraz môžete nastaviť nový prací program. Otvorenie dvierok spotrebiča: 1. 2. 3. Ak je teplota a hladina vody príliš vyso‐ ká, symbol blokovania dvierok stále svieti. Nie je možné otvoriť dvierka. Ak je to potrebné, môžete dvierka otvoriť podľa nasledujúcich pokynov: 1. Vypnite spotrebič. 2.
SLOVENSKY 59 UŽITOČNÉ RADY A TIPY VLOŽENIE BIELIZNE • Bielizeň rozdeľte na: bielu, farebnú, syntetic‐ kú, jemnú a vlnenú bielizeň. • Dodržiavajte pokyny uvedené na štítkoch ode‐ vov. • Neperte spolu bielu a farebnú bielizeň. • Niektorá farebná bielizeň môže po prvom pra‐ ní pustiť farbu. Nové farebné odevy odporúča‐ me prať prvýkrát osobitne. • Zapnite gombíky na obliečkach, zipsy, háčiky a patentky. Zaviažte opasky. • Vyprázdnite vrecká a odevy narovnajte.
www.aeg.com OŠETROVANIE A ČISTENIE VAROVANIE Pred čistením spotrebiča ho odpojte zo sieťovej zásuvky. ODSTRAŇOVANIE VODNÉHO KAMEŇA Voda bežne obsahuje rozpustené minerálne lát‐ ky, ktoré sa usadzujú vo forme vodného kameňa. Ak to bude nutné, používajte zmäkčovač vody na eliminovanie tvorby vodného kameňa. Používajte výrobok určený pre práčky. Dodržia‐ vajte pokyny výrobcov uvedené na obale. Robte to oddelene od prania bielizne. VONKAJŠIE ČISTENIE Spotrebič čistite iba mydlom a teplou vodou.
SLOVENSKY 61 DÁVKOVAČ PRACIEHO PROSTRIEDKU Čistenie dávkovača: 1 1. 2. Zatlačte páčku. Vytiahnite dávkovač von. 3. 4. Odstráňte vrchnú časť priehradky na prí‐ davný tekutý prostriedok. Jednotlivé časti umyte vodou. 5. 6. Dutinu dávkovača vyčistite kefou. Dávkovač vložte späť do dutiny. 2 VYPÚŠŤACIE ČERPADLO Pravidelne kontrolujte vypúšťacie čer‐ padlo a uistite sa, že je čisté. Vyčistite čerpadlo, ak: • Spotrebič nevypúšťa vodu. • Bubon sa nemôže otáčať.
www.aeg.com Čistenie vypúšťacieho čerpadla: 1. Otvorte dvierka vypúšťacieho čerpadla. 2. Klapku vytiahnete. 3. Pod výklenok vypúšťacieho čerpadla vložte nádobku, do ktorej bude vytekať voda. Zatlačte obidve páčky a potiahnite dopredu odtokový kanálik, aby mohla voda vytiecť. 4. 1 5. 6. Keď je nádoba plná vody, znova založte odtokový kanálik späť a vyprázdnite nád‐ obu. Opätovne vykonajte kroky 4 a 5, kým z vypúšťacieho čerpadla nebude vytekať žiadna voda.
SLOVENSKY 63 Filter vyčistite pod tečúcou vodou a založte ho späť do čerpadla do príslušných vodi‐ diel. 10. Uistite sa, že ste filter dobre dotiahli, aby ste zabránili unikaniu vody. 11. Vložte späť záklopku a zatvorte dvierka vy‐ púšťacieho čerpadla. 9. 2 1 FILTER NA PRÍVODNEJ HADICI A FILTER VENTILU Možno bude potrebné vyčistiť filtre, keď: • Do spotrebiča nepriteká voda. • Spotrebič sa dlho napĺňa vodou. • Ukazovateľ tlačidla 6 bliká a na displeji sa zobrazí príslušný alarm.
www.aeg.com Keď vypustíte vodu v prípade núdzového vypu‐ stenia, musíte znova zapnúť systém vypúšťania: 1. Nalejte 2 litre vody do hlavnej priehradky dávkovača pracieho prostriedku. 2. Vodu vypustíte spustením programu. OCHRANNÉ OPATRENIA PRED MRAZOM Ak sa spotrebič nachádza na mieste, kde môže teplota klesnúť pod 0 °C, odstráňte zvyšnú vodu z prívodnej hadice a odtokového čerpadla. 1. Vytiahnite zástrčku napájacieho kábla zo zásuvky elektrickej siete. 2. Zatvorte vodovodný ventil. 3.
SLOVENSKY 65 RIEŠENIE PROBLÉMOV A ÚDRŽBA Spotrebič sa nespustí alebo sa zastaví počas prevádzky. Pokúste sa nájsť riešenie problému skôr, ako sa obrátite na centrum služieb (pozrite si tabuľku). Pri niektorých problémoch zaznie zvukový signál a na displeji sa zobrazí poruchové hlásenie. VAROVANIE Pred vykonaním kontroly vypnite spo‐ trebič. Problém Možná príčina Možné riešenie Displej vás upozorní, aby ste skontrolovali vodovodný ventil: do spotrebiča nepriteká voda. Vodovodný ventil je zatvore‐ ný.
www.aeg.com Problém Fáza odstreďovania nefunguje. Možná príčina Možné riešenie Je zapnutá funkcia Plákanie stop . Nastavte program vypustenia. Fáza odstreďovania je vy‐ pnutá. Nastavte program odstreďovania. Filter vypúšťacieho čerpadla je upchaný. Vyčistite filter odtokového čerpadla. Pozrite si časť „Ošetrovanie a čiste‐ nie“. Problémy s vyvážením nápl‐ ne bielizne. Ručne upravte odevy v bubne a znovu spustite fázu odstreďovania. Program sa nespúšťa.
SLOVENSKY Problém Vnútorné osvetlenie nesvieti. Možná príčina Možné riešenie Nastavili ste nesprávnu te‐ plotu. Uistite sa, že nastavujete správnu te‐ plotu. V bubne je príliš veľa bieliz‐ ne. Vyberte nejakú bielizeň. Žiarovka je vypálená. Ak chcete vymeniť žiarovku, obráťte sa na servisné stredisko. 67 Po parnom programe Spotrebič nie je presne vy‐ je bielizeň mierne vlh‐ rovnaný vo vodorovnej polo‐ ká. he.
www.aeg.com INŠTALÁCIA SÚPRAVA UPEVŇOVACÍCH DOŠTIČIEK (405517114) K dispozícii od autorizovaného predajcu. Ak spotrebič inštalujete na podstavec, zaistite spotrebič upevňovacími doštičkami. Postupujte podľa pokynov dodávaných so súpra‐ vou. ROZBALENIE 1. Použite rukavice. Odstráňte vonkajšiu fóliu. V prípade potreby použite nôž. 2. 3. Odstráňte horný kartón. Odstráňte polystyrénový obalový materiál. 4. Odstráňte vnútornú fóliu. 5. Otvorte dvierka.
SLOVENSKY 69 6. Jeden z polystyrénov položte na podlahu za spotrebič. Spotrebič naň opatrne položte zadnou stranou. Dbajte na to, aby ste ne‐ poškodili hadice. 7. Odstráňte dolnú polystyrénovú ochranu. 8. Spodok spotrebiča dôkladne vyčistite a vy‐ sušte. Nepoužívajte alkohol, rozpúšťadlá ani chemikálie. 9. Všimnite si rôzne veľkosti a umiestnenie zvukových bariér.
www.aeg.com 10. – Zo zvukových bariér odstráňte ochrannú x4 A pásku. – Tieto štyri bariéry pripevnite k spodnej časti spotrebiča. Pozri uvedený obrázok. – Uistite sa, že sú bariéry bezpečne pri‐ pevnené. Zvukové bariéry pripevňujte pri izbovej teplote. B 11. Nadvihnite spotrebič do kolmej polohy. 12. Napájací kábel a odtokovú hadicu uvoľnite z držiakov. 13. Kľúčom dodávaným so spotrebičom od‐ skrutkujte tri skrutky. Vytiahnite všetky pla‐ stové rozpery.
SLOVENSKY 71 14. Do otvorov umiestnite plastové viečka. Tie‐ to viečka nájdete vo vrecku s návodom na používanie. VAROVANIE Pred montážou spotrebiča odstráňte všetky obaly a prepravné skrutky. Odporúčame, aby ste si obaly a pre‐ pravné skrutky odložili pre prípady, keď budete spotrebič premiestňovať. UMIESTNENIE A VYROVNANIE DO VODOROVNEJ POLOHY • Spotrebič nainštalujte na plochú a tvrdú podla‐ hu. • Uistite sa, že koberec nebráni cirkulácii vzdu‐ chu pod spotrebičom.
www.aeg.com PRÍVODNÁ HADICA • Pripojte hadicu k spotrebiču. Prívodnú hadicu otočte len doľava alebo doprava. Uvoľnite prstencovú maticu a nastavte správnu polohu. 20 O 45 O • Prívodnú hadicu pripojte k vodovodnému ko‐ hútiku so studenou vodou s 3/4" závitom. POZOR Uistite sa, že z prípojok nepresakuje vo‐ da. Ak je prívodná hadica príliš krátka, ne‐ používajte predlžovaciu hadicu. Obráťte sa na servisné stredisko a požiadajte o výmenu prívodnej hadice.
SLOVENSKY 73 Pomocou plastového vodidla hadice. • Na okraj umývadla. • Uistite sa, že plastové vodidlo sa nemôže po‐ čas odčerpávania vody pohybovať. Pripojte vodidlo k vodovodnému ventilu alebo na ste‐ nu. • K odpadovému potrubiu s vetracím otvorom. Pozri uvedený obrázok. Priamo do odtokové‐ ho potrubia vo výške minimálne 60 cm a maxi‐ málne 100 cm. Koniec odtokovej hadice musí byť odvetraný, t. j. vnútorný priemer odtokové‐ ho potrubia musí byť väčší než vonkajší prie‐ mer odtokovej hadice.
www.aeg.com Odtokovú hadicu môžete predĺžiť na dĺ‐ žku max. 400 cm. Ak potrebujete inú odtokovú hadicu, prípadne ju chcete predĺžiť, obráťte na servisné stredisko.
SLOVENSKY 75
www.aeg.