EN User Manual Washing Machine L 98699 FL2
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 6 4. CONTROL PANEL...........................................................................................................7 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth.
ENGLISH 2.3 Water connection • Make sure not to cause damage to the water hoses. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. 2.4 Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging.
www.aeg.com 3. PRODUCT DESCRIPTION 3.1 Appliance overview 1 2 3 4 5 6 1 2 3 4 5 6 7 8 Worktop Detergent dispenser Control panel Door handle Internal light Rating plate Drain pump filter Feet for the appliance level 7 8 3.2 How to activate the child safety device This device prevents children or pets to be closed in the drum. Turn the device clockwise, until the groove is horizontal. You cannot close the door. To close the door, turn the device anticlockwise until the groove is vertical. 3.
ENGLISH 7 3.4 Accessories If you install the appliance on a plinth, secure the appliance in the fixing plates. Read carefully the instructions supplied with the accessory. 1 2 5 4 1 Spanner To remove the transit bolts. 2 Plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. 3 Sound barriers To decrease the noise while the appliance operates. 4 Plastic hose guide To connect the drain hose on the edge of a sink.
www.aeg.com 9 Extra Rinse touch button (Extra Spülen) 10 Option touch button (Flecken/ Vorwäsche) 11 Spin reduction touch button (U./Min.) 12 Temperature touch button (Temp.) 4.2 Display A J I B H G C F D E The display shows: A The text bar: • Guides you in the use of the appliance. • Shows the programme status and phase. • Shows alarm messages. Refer to 'Troubleshooting' . The symbols appear on the display when the related phase or function is set.
ENGLISH 9 Digit area Time of the day When you activate the appliance the display shows the time of the day for some seconds. To adjust the clock, refer to "Clock setting". Programme duration When you touch the related button, the programme cycle duration is displayed for few seconds then, the time of the programme end appears again. Programme duration indicator The indicator comes on when the digits shows the programme duration.
www.aeg.com Time save The indicator comes on when you set one of the programme duration. F Shortened time Extra Quick Extra rinsing H The value shows the total number of the rinses. The indicator bar fills accordingly the numbers of rinses. Stain indicator Prewash indicator I Soak indicator The indicator bar fills accordingly to the set functions. Spin speed of the set programme J No Spin indicator1) Rinse Hold indicator 1) Only available for SPIN/DRAIN programme.
ENGLISH Programme Temperature range Koch/Bunt 95°C - Cold Maximum load Maximum spin speed Programme description (Type of load and soil level) 9 kg 1600 rpm White cotton and coloured cotton. Normal soil and light soil. 9 kg White and coloured cotton. Normal soil and light soil. The programme eliminates all spinning phase to perform a silent cycle. The cycle stops with water in the tub. 4 kg 1200 rpm Synthetic items or mixed fabric items. Normal soil.
www.aeg.com Programme Temperature range 20 Min. - 3 kg 40°C - 30°C Super Eco Cold Baumwolle Eco4) Maximum load Maximum spin speed Programme description (Type of load and soil level) 3 kg 1200 rpm Cottons and synthetics items with light soil level or worn only once. 3 kg 1200 rpm Mixed fabric (cotton and synthetic items)3). 9 kg 1600 rpm White cotton and colour-fast cotton. Normal soil. The energy consumption decreases and the time of the washing programme is extended.
ENGLISH Programme Temperature range 13 Maximum load Maximum spin speed Programme description (Type of load and soil level) 1.5 kg Steam programme for synthetic items. This cycle helps to dewrinkle the laundry. Glätten 40° C 1) To reduce the creases of the laundry, this cycle regulates the water temperature and performs a soft wash and spin phase. The appliance adds some rinses. 2) During this cycle the drum rotates slowly to ensure a gentle washing.
www.aeg.com Programme Flecken/ Vorwä- U./ Min. Soak sche 1) Extra Spü- Zeit Spa- len 2) ren 3) Zeitvorwahl Schleudern/Pumpen5) ■ Spülen ■ ■ ■ ■ Outdoor ■ ■ ■ ■ 20 Min. - 3 kg ■ Super Eco ■ ■ Baumwolle Eco ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■6) ■ 1) If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a temperature lower then 40°C. 2) With a low spin speed the appliance performs delicate rinses and a short spin.
ENGLISH 15 At programme start the display shows the duration programme for the maximum load capacity. During the washing phase the programme duration is automatically calculated and can be greatly reduced if the laundry load is lower than the maximum load capacity (e.g. Cotton 60°C, maximum load capacity 9 kg, the programme duration exceeds 2 hours; real load 1 kg, the programme duration don’t reach 1 hour). When the appliance is calculating the real programme duration a dot blinks in the display.
www.aeg.com where the steam function is available. The duration of the steam phase changes accordingly to your selection. 7.7 Extra Spülen 7.3 Memory Use this function for persons allergic to detergents and in areas where the water is soft. Touch one of the buttons Memory to memorise a programme or to set a memorised programme. Memorise a programme: 1. Press button Auto Off to activate the appliance. 2. Turn the programme knob to your favourite programme. 3.
ENGLISH 17 8. SETTINGS 8.1 Acoustic signals You can activate this function: You can hear the acoustic signals when: • After you touch Start/Pause : all the buttons and the programme knob are deactivated. • Before you touch Start/Pause : the appliance cannot start. • You activate the appliance. • You deactivate the appliance. • You touch the buttons. • The programme is completed. • The appliance has a malfunction.
www.aeg.com The minute digits flash. 3. Turn the programme knob to change the minutes. 4. Touch Start/Pause button to confirm the selection. 9.4 Change the time of the day after the first activation 1. Touch the button Extra Spülen and the button Zeit Sparen at the same time for some seconds. The hour digits flash. 2. Turn the programme knob to change the hour. 3. Touch Start/Pause button to confirm the selection. The minute digits flash. 4. Turn the programme knob to change the minutes. 5.
ENGLISH If you put in the drum more laundry than the maximum load, the text bar tells that you have put more than the maximum load. You can wash your laundry but the water and energy consumption increase. Remove some items to have the best consumption and washing performance The overload indication is available only for programmes with a maximum load lower than the appliance maximum load. 3. Close the door. The text bar tells the percentage of detergent to use.
www.aeg.com 1 2 3. To use powder detergent, turn the flap up. A With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit showed in the flap. • Do not set the prewash phase. • Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. 10.
ENGLISH 10.9 Cancelling the delay start 1. Touch button Start/Pause. The related indicator flashes. 2. Touch button Zeitvorwahl again and again until the display tells that there is no delay start. 3. Touch button Start/Pause. The programme starts. 10.10 Behaviour of the appliance After approximately 15 minutes from the start of the programme: • The appliance adjusts automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time.
www.aeg.com When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle. 2. Remove the laundry from the appliance. 3. Make sure that the drum is empty. 4. Keep the door and air filter ajar, to prevent mildew and odours. 10.15 Draining water out after end of cycle The washing programme is completed, but there is water in the drum: • The drum turns regularly to prevent the creases in the laundry. • The door stays locked.
ENGLISH 11.2 Stubborn stains For some stains, water and detergent is not sufficient. We recommend that you remove these stains before you put the items in the appliance. Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric. 11.
www.aeg.com the drum. Make regularly a maintenance wash. To do this: Regularly examine the seal and remove all objects from the inner part. • Remove the laundry from the drum. • Set the cotton programme with the highest temperature with a small quantity of detergent. 12.5 Cleaning the drum Regularly examine the drum to prevent limescale and rust particles. Only use special products to remove rust particles from the drum. 12.4 Door seal We suggest you to: 1.
ENGLISH 1. 2. 2 1 1 2 1 3. 4. 1 5. 6. 1 7. 2 2 8.
www.aeg.com 9. 2 1 12.8 Cleaning the inlet hose and the valve filter 1. 2. 1 2 3 3. 4. 45° 20° 12.9 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1.
ENGLISH 12.10 Frost precautions If the appliance is installed in an area where the temperature can be less than 0° C, remove the remaining water from the inlet hose and the drain pump. 27 5. When the drain pump is empty, install the inlet hose again. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a container and let the water flow out of the hose. 4. Empty the drain pump. Refer to the emergency drain procedure.
www.aeg.com Message Possible solution The display tells to check the Make sure that the drain hose is not damaged. drain filter: the appliance does not drain the water. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Make sure that the connection of the drain hose is correct. The display tells to check the Make sure that the appliance door is not open or closed door. correctly. The display tells there is a water alert.
ENGLISH Problem 29 Possible solution Make sure that the this is not a balance problem. Adjust manually the items in the drum and start the spin phase again. There is water on the floor. Make sure that the couplings of the water hoses are tight and there is not water leakages. Make sure that the drain hose have no damages. Make sure you use the correct detergent and the correct quantity of it. You cannot open the appliance door. Make sure that the washing programme is finished.
www.aeg.com Problem Possible solution After a steam programme, garments are not sufficiently smooth. Make sure that you set a correct STEAM programme (e.g. Synthetic instead of Cotton). The drum is empty and the display shows there is some weight in. Press button Auto Off to deactivate the appliance and activate it again to set a tare. The drum is full but the dis- You loaded the laundry before activating the appliance. Press button Auto Off to deactivate the appliance.
ENGLISH 31 15.
132924352-A-092015 www.aeg.
