FR Notice d'utilisation Lavante-séchante L 99695 HWD
www.aeg.com TABLE DES MATIÈRES 1. CONSIGNES DE SÉCURITÉ........................................................................................... 3 2. INSTRUCTIONS DE SÉCURITÉ...................................................................................... 6 3. DESCRIPTION DE L'APPAREIL...................................................................................... 7 4. BANDEAU DE COMMANDE......................................................................................... 9 5.
FRANÇAIS 1. 3 CONSIGNES DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT! Risque d'asphyxie, de blessure ou d'invalidité permanente.
www.aeg.com • • • • • • • • • • • • • L'appareil peut être installé de façon autonome ou sous un plan de travail de cuisine si un espace correct est disponible. L'appareil ne doit pas être installé derrière une porte à serrure, une porte coulissante ni une porte battante dotée d'une charnière du côté opposé à l'appareil qui pourrait empêcher l'ouverture complète du hublot. Ne connectez la fiche d'alimentation secteur à la prise de courant secteur qu'à la fin de l'installation.
FRANÇAIS • • • • • • • • • • 5 térébenthine, la cire et les substances pour retirer la cire soient lavés dans de l'eau chaude avec une quantité supplémentaire de détergent avant d'être séchés dans le sèche-linge à tambour. Ne séchez pas d'articles sur lesquels ont été utilisés des produits de nettoyage chimiques industriels. N'introduisez dans le sèche-linge que du linge propre.
www.aeg.com 2. INSTRUCTIONS DE SÉCURITÉ 2.1 Instructions d’installation • Retirez l'intégralité de l'emballage et les boulons de transport. • Conservez les boulons de transport. Si vous devez déplacer à nouveau l'appareil, il est conseillé de bloquer le tambour. • Soyez toujours vigilants lorsque vous déplacez l'appareil car il est lourd. Portez toujours des gants de sécurité. • N'installez pas et ne branchez pas un appareil endommagé.
FRANÇAIS • Ne séchez pas d'articles endommagés contenant un rembourrage ou un garnissage. • Si vous avez lavé votre linge avec un produit détachant, lancez un cycle de rinçage supplémentaire avant de démarrer un cycle de séchage. • Veillez à retirer tout objet métallique du linge avant chaque lavage. • Séchez uniquement les textiles adaptés au séchage dans une lavanteséchante. Suivez les instructions figurant sur l'étiquette des textiles. • Les objets en plastique ne sont pas résistants à la chaleur.
www.aeg.com Filtre(s) à air Panneau de commande Poignée d'ouverture du couvercle Plaque de calibrage Filtre de la pompe de vidange Pieds pour la mise de niveau de l'appareil 9 Fentes de circulation d'air 3 4 5 6 7 8 10 11 12 13 14 Tuyau d'évacuation d'eau Tuyau d'arrivée d'eau Câble d'alimentation électrique Boulons de transport Pieds pour la mise de niveau de l'appareil 3.
FRANÇAIS 9 4. BANDEAU DE COMMANDE 4.
www.aeg.com A Barre de texte : • Vous guide lors de l'utilisation de l'appareil. • Indique l'état et la phase du programme. • Affiche les messages d'alarme. Reportez-vous au chapitre « En cas d'anomalie de fonctionnement ». Les symboles s'affichent lorsque la phase ou la fonction correspondante est programmée. B Sécurité enfants Hublot verrouillé C Vous ne pouvez pas ouvrir le hublot de l'appareil lorsque ce symbole est allumé.
FRANÇAIS 11 Cette partie ne s'allume que si le hublot est ouvert - Consultez le chapitre « Activation de l'appareil et sélection d'un programme ». E Charge maximale autorisée pour le programme sélectionné (en kg). Barres graphiques Pour régler une fonction : Le voyant de fonction s'allume lorsque la fonction est sélectionnée. Une barre vide s'affiche si la fonction correspondante est compatible avec le programme sélectionné.
www.aeg.com Voyant de tâche Voyant de prélavage I Voyant de trempage La barre se remplit en fonction des sélections. Vitesse d'essorage du programme sélectionné J Voyant d'absence d'essorage1) Indicateur Arrêt cuve pleine 1) Uniquement disponible pour le programme ESSORAGE/VIDANGE. Température par défaut du programme sélectionné K Eau froide 5. PROGRAMMES 5.
FRANÇAIS Programme Plage de températures Anti-Allergies 60°C 13 Charge maximale Vitesse d'essorage maximale Description des programmes (Type de charge et degré de salissure) 9 kg 1600 tr/min Articles en coton blanc. Ce programme élimine les micro-organismes grâce à un lavage à 60 °C et un rinçage supplémentaire. Le lavage est ainsi plus efficace. Programmes de séchage 6 kg Programme de séchage pour les articles en coton. 4 kg Programme de séchage pour les articles synthétiques.
www.aeg.com Programme Plage de températures Charge maximale Vitesse d'essorage maximale Description des programmes (Type de charge et degré de salissure) Programmes vapeur8) La vapeur peut être utilisée sur du linge sec, lavé ou porté une seule fois. Ces programmes permettent de réduire le froissement et les odeurs et rendent le linge plus doux. N'utilisez aucun produit de lavage.
FRANÇAIS Programme Plage de températures 15 Charge maximale Vitesse d'essorage maximale Description des programmes (Type de charge et degré de salissure) jusqu'à 1.5 kg Programme vapeur pour les articles en coton et textiles synthétiques. Ce cycle élimine les odeurs Rafraîchir 40°C du linge.9) 1) Lorsque vous sélectionnez un programme de lavage/séchage, un message s'affiche pour vous dire qu'aucun cycle de séchage n'est défini.
www.aeg.com Température T/ min. Prélavage Taches Délicats ■ ■ ■ ■ Repassage Facile ■ ■ ■ ■ Super Eco ■ ■ 20 Min.-3kg ■ Rinçage ■ Essorage/Vidange ■ Trempage ■ Gain de Temp s2) Départ Différé ■ ■ ■ ■ ■ ■ Rinçage Plus 1) ■ ■ ■ ■ ■ ■ ■ ■ 1) Si l'option Rinçage plus permanent est activée, l'appareil ajoute des rinçages supplémentaires.
FRANÇAIS 17 5.3 Programmes pour le séchage chronométrique Degré de séchage Type de textile Extra Sec Pour les articles en tissu éponge Coton et lin (peignoirs, serviettes de bain, etc.) Prêt à Ranger Pour les articles à ranger directement Charge (kg) Coton et lin (peignoirs, serviettes de bain, etc.
www.aeg.com 6. VALEURS DE CONSOMMATION Les données de ce tableau sont approximatives. Les données peuvent différer pour différentes raisons : la quantité et le type de linge, la température ambiante ou de l'eau. Au démarrage du programme, l'affichage indique la durée du programme pour la charge maximale. Durant la phase de lavage, la durée du programme est calculée automatiquement.
FRANÇAIS Si vous désactivez les signaux sonores, ils ne continueront à retentir que lorsque vous appuierez sur les touches et lorsque l'appareil présente une anomalie. 7.2 Fonction Sécurité enfants Avec cette fonction, vous pouvez empêcher les enfants de jouer avec le bandeau de commande. • Pour activer/désactiver cette fonction, appuyez simultanément sur les touches Temp. et T/min. jusqu'à s'allume/ ce que le voyant s'éteigne.
www.aeg.com linge que vous devez sécher. La barre de texte indique la valeur réglée. À chaque fois que vous appuyez sur cette touche, la durée augmente de 5 minutes. 8.11 Taches/Prélavage Appuyez sur cette touche pour sélectionner l'une des fonctions suivantes : • 8.6 Vapeur Prélavage Utilisez cette fonction pour le linge très sale. L'appareil ajoute une phase de prélavage au lavage principal. La durée du programme augmente. • Appuyez sur cette touche pour régler le niveau de vapeur.
FRANÇAIS 21 9. AVANT LA PREMIÈRE UTILISATION 1. Versez une petite quantité de détergent dans le compartiment de la phase de lavage. 2. Sélectionnez et faites démarrer, à vide, un programme pour le coton à la température la plus élevée possible. Cela élimine toute salissure éventuelle du tambour et de la cuve. 9.1 Réglage de l'horloge Après avoir sélectionné la langue, l'écran indique qu'il faut paramétrer l'horloge. Les chiffres des heures clignotent. 1.
www.aeg.com Le voyant de la touche Départ/Pause clignote en rouge. L'affichage indique la température et la vitesse d'essorage par défaut, et si le hublot est déjà ouvert, la charge maximale autorisée pour le programme sélectionné (cette information disparaît dès que vous fermez le hublot). 3. Si nécessaire, appuyez sur la touche Temp. et sur la touche T/min. pour modifier la température de l'eau et la vitesse d'essorage. 4.
FRANÇAIS 10.5 Lessive liquide ou en poudre 1 A 2 1. 2. B 4. 3. • Position A pour la lessive en poudre (réglage d'usine). • Position B pour la lessive liquide. Si vous utilisez une lessive liquide : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne dépassez pas le niveau maximum. • Ne sélectionnez pas de phase de prélavage. • Ne sélectionnez pas la fonction Départ différé. 10.
www.aeg.com 10.8 Départ d'un programme avec départ différé 1. Appuyez sur la touche Départ Différé à plusieurs reprises pour sélectionner le départ différé souhaité. L'affichage indique la fin prévue du programme. 2. Appuyez sur la touche Départ/Pause. L'appareil démarre le décompte du départ différé. Lorsque le décompte est terminé, le programme démarre automatiquement. Avant d'appuyer sur la touche Départ/Pause pour démarrer l'appareil, vous pouvez annuler ou modifier le réglage du départ différé.
FRANÇAIS L'appareil effectue automatiquement la vidange et l'essorage au bout d'environ 18 heures. 10.14 Option « Veille auto » L'option Veille auto éteint automatiquement l'appareil pour réduire la consommation d'énergie lorsque : • Vous n'utilisez pas l'appareil pendant 5 minutes avant d'appuyer sur la touche Départ/Pause. 25 Appuyez sur la touche Marche/Arrêt pour mettre à nouveau l'appareil en marche.
www.aeg.com Au début du cycle de séchage (3 à 5 minutes) le niveau sonore peut être légèrement plus fort. Ce bruit est dû au démarrage du compresseur, ce qui est normal dans des appareils alimentés par un compresseur comme les réfrigérateurs, les congélateurs, et d'autres. 12.2 Séchage automatique 1. Appuyez à plusieurs reprises sur la touche Séchage automatique pour régler le degré de séchage souhaité. Les voyants sur le bandeau de commande s'allument en conséquence : a.
FRANÇAIS 27 13. UTILISATION QUOTIDIENNE - LAVAGE ET SÉCHAGE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 13.1 Programme NON-STOP (séchage enchaîné) Vous pouvez laver et sécher votre linge en une fois en sélectionnant un « programme non-stop ». Procédez comme suit : 1. Appuyez sur la touche Marche/Arrêt pendant quelques secondes pour allumer l'appareil. 2. Chargez le linge dans le tambour, un article à la fois. 3.
www.aeg.com 13.5 Peluches sur les textiles Durant les phases de lavage et/ou séchage, certains types de textiles, tels que le tissu éponge, la laine ou les sweat-shirts, peuvent perdre des peluches. Ces peluches peuvent ensuite s'accrocher aux tissus lavés au cours du cycle suivant. Cet inconvénient est encore plus fréquent avec des tissus techniques.
FRANÇAIS Des détachants spéciaux sont disponibles. Utilisez le détachant spécial adapté au type de tache et de textile. 14.3 Produits de lavage et additifs • Utilisez uniquement des produits de lavage et des additifs spécialement conçus pour les lave-linge : – lessives en poudre pour tous les types de textiles, – lessives en poudre pour les textiles délicats (40 °C max.) et les lainages, – lessives liquides, de préférence pour les programmes de lavage à basse température (60 °C max.
www.aeg.com • = Le vêtement peut être séché en machine • = Le cycle de séchage est à haute température • = Le cycle de séchage est à basse température • = Le vêtement ne peut pas être séché en machine. 14.9 Durée du cycle de séchage La durée de séchage peut varier en fonction : • de la vitesse du dernier essorage • du degré de séchage • du type de linge • de la quantité de linge 14.
FRANÇAIS • Sélectionnez le programme pour le coton à température maximale avec une petite quantité de détergent. Examinez régulièrement le joint et enlevez tous les objets situés à l'intérieur. 15.4 Joint du couvercle 15.5 Nettoyage du distributeur de produit de lavage 1. 2. 1 2 3. 31 4.
www.aeg.com 15.6 Nettoyage des filtres à air Les filtres à air recueillent les peluches. Les peluches proviennent généralement des vêtements séchés dans une lavante-séchante. • À la fin de chaque cycle de séchage, le voyant s'allume pour vous rappeler de nettoyer le filtre à air principal. La barre de texte vous indique de nettoyer le filtre principal (voir illustration 1-5). peut clignoter de temps en temps pour vous rappeler que les deux filtres à • Le voyant air doivent être nettoyés.
FRANÇAIS + 10. 9. Pour obtenir les meilleures performances de séchage, nettoyez régulièrement les filtres à air avec de l'eau chaude et, ensuite, séchez-les avec une serviette. Un filtre obstrué augmente le temps de séchage. AVERTISSEMENT! Le logement du filtre principal ne doit être obstrué par aucun objet. Si vous lavez votre linge uniquement avec votre lavante-séchante, il est normal que le filtre à air principal soit légèrement humide. 15.
www.aeg.com 3. 4. 1 5. 2 6. 1 2 7. 8. 1 2 9.
FRANÇAIS 35 15.8 Nettoyage du filtre du tuyau d'arrivée d'eau et filtre de la vanne Il peut être nécessaire de nettoyer les filtres lorsque : • L'appareil ne se remplit pas d'eau. • L'appareil met du temps à s'approvisionner en eau. • Le voyant de la touche Départ/Pause clignote et l'alarme correspondante s'affiche. Reportez-vous au chapitre « En cas d'anomalie de fonctionnement ». Pour nettoyer les filtres d'arrivée d'eau : • Fermez le robinet d'eau.
www.aeg.com 15.9 Vidange d'urgence En raison d'une anomalie de fonctionnement, l'appareil ne peut pas vidanger l'eau. Si cela se produit, procédez aux étapes (1) à (9) du chapitre « Nettoyage du filtre de vidange ». Si nécessaire, nettoyez la pompe. Lorsque vous vidangez l'eau avec la vidange d'urgence, vous devez réactiver le système de vidange : 1.
FRANÇAIS Message 37 Solution possible Assurez-vous que la pression de l'eau n'est pas trop faible. Pour connaître cette information, contactez votre compagnie locale de distribution des eaux. Assurez-vous que le robinet d'eau n'est pas obstrué et qu'il n'est pas entartré. Assurez-vous que le filtre du tuyau d'arrivée et le filtre de la vanne ne sont pas obstrués. Reportez-vous au chapitre « Entretien et nettoyage ». Assurez-vous que le tuyau d'arrivée d'eau n'est pas endommagé.
www.aeg.com Problèmes sans message d'alarme Problème Solution possible Le programme ne démarre pas. Assurez-vous que la fiche du câble d'alimentation est bien insérée dans la prise de courant. Assurez-vous qu'aucun fusible n'a disjoncté dans la boîte à fusibles. Vérifiez que vous avez bien appuyé sur la touche Départ/ Pause. Si vous avez sélectionné un départ différé, annulez-le ou attendez la fin du décompte. Désactivez la sécurité enfants si elle a été préalablement activée.
FRANÇAIS Problème 39 Solution possible Sélectionnez le programme de vidange ou d'essorage s'il y a de l'eau dans le tambour. Vérifiez que l'appareil est alimenté en électricité. Ce problème peut résulter d'une anomalie de l'appareil. Contactez le service après-vente agréé. Si vous devez ouvrir le couvercle, lisez attentivement le chapitre « Ouverture d'urgence du couvercle ». L'appareil fait un bruit inhab- Vérifiez que l'appareil est de niveau. Reportez-vous au ituel. chapitre « Installation ».
www.aeg.com Problème Solution possible Assurez-vous que votre charge de linge ne dépasse pas la charge déclarée du programme sélectionné. Vérifiez que la température ambiante est dans la plage de températures adaptées. Le linge est couvert de peluches de différentes couleurs. Sélectionnez un cycle de séchage pour éliminer les peluches (reportez-vous au chapitre « PELUCHES SUR LES TEXTILES » pour plus de détails). Lavez votre linge avec un anti-pelucheux.
FRANÇAIS 41 5. Sortez le linge et refermez le hublot. 6. Fermez le volet du filtre. 17. INSTALLATION AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 17.1 Déballage AVERTISSEMENT! Après avoir posé l'appareil paroi arrière vers le sol, attendez environ 6 heures avant de l'utiliser. Cette période est nécessaire pour permettre au compresseur de fonctionner correctement. AVERTISSEMENT! Retirez l'intégralité de l'emballage et les boulons de transport avant d'installer l'appareil.
www.aeg.com • Retirez la partie supérieure du carton. • Retirez les cales en polystyrène. • Retirez le film interne. • Ouvrez le hublot. • Retirez la cale en polystyrène du joint du hublot et tous les articles présents dans le tambour. • Placez l'une des cales en polystyrène au sol derrière l'appareil. • Couchez avec soin l'appareil sur le dos. • Assurez-vous de ne pas endommager les tuyaux. • Retirez la base en polystyrène en bas de l'appareil.
FRANÇAIS 43 • Remettez l'appareil en position verticale. • Retirez le câble d'alimentation électrique et le tuyau de vidange de leurs supports. Il est possible de voir l'eau s'écouler du tuyau d'évacuation. Ceci est dû au test d'eau en usine des appareils. • Desserrez les trois boulons. • Utilisez la clé fournie avec l'appareil. • Retirez les entretoises en plastique. • Mettez les bouchons en plastique dans les orifices. • Ces bouchons se trouvent dans le même sachet que la notice d'utilisation.
www.aeg.com 17.3 Installation sous un plan de travail L'appareil peut être installé de façon autonome ou sous un plan de travail de cuisine si un espace correct est disponible (voir schéma). 600 mm ≥ 870 mm ATTENTION! Pour assurer une circulation d'air optimale sous l'appareil, n'installez pas les isolants acoustiques (si fournis). 600 mm 17.4 Positionnement et mise de niveau • Placez l'appareil sur un sol plat et dur.
FRANÇAIS 45 17.5 Tuyau d'arrivée d'eau • Raccordez le tuyau à l'arrière de l'appareil. Le tuyau d'alimentation peut être orienté vers la gauche ou la droite. • Desserrez l'écrou de la bague pour bien la positionner. 45 20 O O • Raccordez le tuyau d'arrivée d'eau à un robinet d'eau froide fileté (3/4 pouce). ATTENTION! Assurez-vous que les raccords ne fuient pas. N'utilisez pas de rallonge si le tuyau d'alimentation est trop court.
www.aeg.com • En formant un U avec le tuyau de vidange. Sur le bord d'un évier • Veillez à ce que le guide de tuyau en plastique ne puisse pas se déplacer lors de la vidange de l'appareil. Fixez le guide au robinet d'arrivée d'eau ou au mur. À une conduite fixe dotée d'une ventilation spéciale • Directement dans un conduit d'évacuation, à une hauteur comprise entre 60 cm et 100 cm. Reportez-vous à l'illustration.
FRANÇAIS 47 Au siphon d'un évier • Reportez-vous à l'illustration. Placez le tuyau de vidange dans le siphon et serrezle avec une attache. • Veillez à ce que le tuyau de vidange fasse une boucle afin d'empêcher des particules passer de l'évier à l'appareil. Au tuyau mural • Directement dans une canalisation de vidange murale intégrée et serrez-le avec une attache. La longueur maximale du tuyau de vidange est de 400 cm.
www.aeg.com Charge de séchage maximale Vitesse d'essorage Coton 6 Synthétiques 4 Laine 1 Maximum 1600 tr/min 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté (3/4 pouce). 19. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le électroniques. Ne jetez pas les appareils symbole . Déposez les emballages dans les conteneurs prévus à cet effet.
FRANÇAIS 49
www.aeg.
FRANÇAIS 51
132908941-A-302014 www.aeg.