User manual

The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you touch button
Start/Pauze - Départ/Pause
to start the appliance, you
can cancel or change the set
of the delay start.
10.9 Cancelling the delay start
1. Touch button Start/Pauze - Départ/
Pause. The related indicator flashes.
2. Touch button Startuitstel - Départ
Différé again and again until the
display tells that there is no delay
start.
3. Touch button Start/Pauze - Départ/
Pause. The programme starts.
10.10 Interrupting a
programme and changing the
options
You can change only some options
before they operate:
1. Touch button Start/Pauze - Départ/
Pause.
The related indicator flashes.
2. Change the options.
3. Touch button Start/Pauze - Départ/
Pause again.
The washing programme continues.
10.11 Cancelling a running
programme
1. Press button Aan/Uit - Marche/Arrêt
to cancel the programme and to
deactivate the appliance.
2. Press button Aan/Uit - Marche/Arrêt
again to activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme, the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment; if
not, fill the detergent again.
10.12 Opening the door
WARNING!
If the temperature and level
of the water in the drum are
too high and the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Touch button Start/Pauze - Départ/
Pause.
The door lock symbol in the display goes
off.
2. Open the appliance door.
3. Close the appliance door and touch
button Start/Pauze - Départ/Pause.
The programme or the delay start
continues
10.13 Draining water out after
end of cycle
The washing programme is completed,
but there is water in the drum:
• The drum turns regularly to prevent
the creases in the laundry.
• The door stays locked.
• You must drain the water to open the
door:
1. If necessary, decrease the spin
speed.
2. Touch the Start/Pauze - Départ/
Pause button.
The appliance drains the water and
spins.
3. When the programme is completed
and the door lock indicator goes off,
you can open the door.
4. Press Aan/Uit - Marche/Arrêt some
seconds to deactivate the appliance.
The appliance drains and
spins automatically after
approximately18 hours.
10.14 AUTO Stand-by option
The AUTO Stand-by function
automatically deactivates the appliance
to decrease the energy consumption
when:
ENGLISH
23