User manual

J
The default spin speed of the programme.
_ _ _
No spin
1)
Rinse Hold
1)
Only available for Spin/Drain programme.
K
The default temperature of the programme.
Cold wash
5.5 Auto Dry
Touch this button to set one of 3 auto-
matic dryness levels proposed by the ap-
pliance. On the control panel the dry-
ness indicators illuminate accordingly.
The text bar in the display shows the set
dryness level:
Iron dry – 1 indicator on: laundry to be
ironed
Cupboard dry – 2 indicators on: laun-
dry to be put in store
Extra dry – 3 indicators on: laundry to
be fully dried.
You can not set all automatic lev-
els for each type of fabrics.
5.6 Time Dry
Touch this button to set the time that
suits the fabrics you have to dry. The text
bar in the display shows the set value.
Each time you touch this button the time
value increases by 5 minutes.
You cannot set all time values for
different types of fabrics.
5.7 Steam
Touch button Steam to set the steam
level. This is possible only with pro-
grammes where the steam function is
available. The duration of the steam
phase changes accordingly to your se-
lection.
5.8 Start/Pause
Touch button Start/Pause to start or in-
terrupt a programme.
5.9 Delay Start
Touch button Delay Start to delay the
start of a programme from 30 minutes to
20 hours.
5.10 Time Save
Touch button Time Save to decrease
the programme time.
You can select:
SHORTENED DURATION
To wash items with daily soil.
EXTRA QUICK
To wash quickly items with almost no
soil.
Some programmes accept only one of
these functions.
5.11 Extra Rinse
Touch button Extra Rinse to add rinsing
phases to a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
5.12 Stains/Prewash
Touch button Stains/Prewash to set one
of the following functions:
•Stains
Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
.
The programme duration increa-
ses.
This function is not available with
a temperature lower than 40° C.
•Prewash
Use this function for heavy soil.
ENGLISH 11