User manual

• Maximum
This is available with the
Steam programme only.
11.14 Memory
With this option it is possible to save the
two most used washing programmes.
To save your favourite programmes:
1. First set the washing programme and
the desired options.
2. Tap on the Memory bar to enter the
submenu.
3. Tap on the Memory 1 or Memory 2
to save the set programme. The
status will change from Empty to In
Use .
When you return to programme list
screen, the M1 or M2 will be on next to
the programme name when you set it.
Afterwards, each time you
turn the appliance on, the
M1 and/or M2 programmes
appear among the first five
programmes automatically
proposed by the appliance
and you can set them in the
programme list screen
directly.
Cottons
M1
Cottons
Settings
1h07min
Cottons Eco
Synthetics
More
1200
40
To change a saved programme:
1. First set the washing programme and
the desired options.
2. Tap on the Memory bar to enter the
submenu.
3. Tap on the Memory 1 or Memory 2
bar with In Use status. A message
pops up asking if you want to empty
or replace the saved programme.
4. Tap on Replace.
To cancel a saved programme:
1. Tap on the Memory bar to enter the
submenu.
2. Tap on the Memory 1 or Memory 2
bar. A message pops up asking if you
want to empty or replace the saved
programme.
3. Tap on Empty. M1 or M2 will
disappear in the programme list
screen.
12.
DAILY USE
WARNING!
Refer to Safety chapters.
12.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme BEFORE
you put the laundry in the
drum.
12.2 Before activating the
appliance
1. Make sure that the mains plug is
connected to the mains socket.
2. Make sure that the water tap is open.
12.3 Activating the appliance
and setting a programme
Press the 开/关 button to turn the
appliance on.
A short tune sounds (if activated). The
appliance proposes Cottons as default
programme.
The led of 启动/暂停 button flashes.
ENGLISH
29