User manual

12.4 Stand-by function
The Stand-by function automatically
deactivates the appliance to decrease
the energy consumption when:
• You do not use the appliance for 5
minutes before pressing the 启动/暂
停 button and turning the appliance
on.
Press the 开/关 button to activate the
appliance again.
• After 5 minutes from the end of the
washing programme.
Press the 开/关 button to activate the
appliance again.
The display shows the end of the last
set programme.
Turn the programme dial to set a new
cycle.
If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
12.5 Setting a programme
1. Turn the programme dial to set the
desired programme.
Cottons
ColourPro
OKOPower
3h
01min
C
ottons Eco
Synthetic
s
More
1200
4
0
Or just tap on the programme name in
the programme summary window to
return to the programme list window and
scroll the programme list up or down to
set the desired programme.
2. After a few seconds the display
shows programme summary screen
indicating the maximum load, the
default temperature, the maximum
spin speed and the programme
duration.
3. You can tap on the Temperature bar
to change the water temperature.
4. You can tap on the Spin Speed bar
to change the spin speed or to set
Rinse & Hold or Extra Silent option.
5. You can tap on More to enter the
menu of the additional available
options and set one or more of them.
Afterwards, the shortcuts of the set
options show up on the programme
summary screen.
The message This setting is
not available pops up in
case of wrong selection.
12.6 Loading the laundry
1. Open the appliance door.
The weight sensor window pops up.
Cottons 40
9 kg
Ready to start
2. Shake the garments before you put
them in the drum.
3. Put the laundry in the drum, one item
at time.
On the display the weight of the laundry
is updated by steps of 0.5 kg and the
programme duration is updated
accordingly when you return to the
programme summary screen.
www.aeg.com
30