L9WE95ÖKO USER MANUAL DE Benutzerinformation Wasch-Trockner
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................6 3. MONTAGE................................................................................................................... 8 4. GERÄTEBESCHREIBUNG......................................................................................... 14 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Erstickungs- und Verletzungsgefahr sowie Gefahr einer dauerhaften Behinderung.
www.aeg.com 1.2 Allgemeine Sicherheit • • • • • • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor. Das Gerät muss freistehend oder unterhalb der Küchenarbeitsfläche installiert werden, sofern die Platzverhältnisse dies zulassen. Das Gerät darf nicht hinter einer verschließbaren Tür, einer Schiebetür oder einer Tür mit einem Scharnier auf der gegenüberliegenden Seite aufgestellt werden, wenn dadurch eine vollständige Öffnung der Gerätetür verhindert wird.
DEUTSCH • • • • • • • • • • • 5 Wenn das Netzkabel beschädigt ist, muss es vom Hersteller, seinem autorisierten Kundenservice oder einer gleichermaßen qualifizierten Person ausgetauscht werden, um Gefahren durch elektrischen Strom zu vermeiden. Wischen Sie die um das Gerät ggf. angesammelten Flusen und/oder Verpackungsrückstände weg. Benutzen Sie das Gerät nie ohne Siebe. Reinigen Sie das Flusensieb vor oder nach jedem Gebrauch.
www.aeg.com • • • Reinigen Sie das Gerät nicht mit einem Wasser- und/ oder Dampfstrahl. Reinigen Sie das Gerät mit einem feuchten Tuch. Verwenden Sie ausschließlich Neutralreiniger. Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen, Lösungsmittel oder Metallgegenstände. Schalten Sie das Gerät immer aus und ziehen Sie den Netzstecker aus der Steckdose, bevor Reinigungsarbeiten durchgeführt werden. 2. SICHERHEITSANWEISUNGEN 2.
DEUTSCH 2.3 Wasseranschluss • Achten Sie darauf, die Wasserschläuche nicht zu beschädigen. • Bevor Sie neue oder lange Zeit nicht benutzte Schläuche, an denen Reparaturarbeiten ausgeführt wurden oder neue Geräte (Wasserzähler usw.) angepasst wurden, an das Gerät anschließen, lassen Sie Wasser durch die Schläuche fließen, bis es sauber austritt. • Stellen Sie sicher, dass es keine sichtbaren Wasserlecks während und nach dem ersten Gebrauch des Gerätes gibt. 2.
www.aeg.com 3. MONTAGE WARNUNG! Siehe Kapitel Sicherheitshinweise. 3.1 Auspacken WARNUNG! Da Sie das Gerät auf seiner Rückseite ablegen werden, müssen Sie anschließend etwa 6 Stunden warten, bevor Sie es benutzen. Diese Zeit ist notwendig, damit der Kompressor richtig arbeiten kann. WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben. Tragen Sie Handschuhe. • Entfernen Sie die äußere Folie. Benutzen Sie, falls erforderlich, einen Cutter.
DEUTSCH 9 • Öffnen Sie die Tür. • Entfernen Sie das Styroporteil aus der Türdichtung und alle Teile aus der Trommel. • Legen Sie eines der Styroporverpackungsteile hinter dem Gerät auf den Boden. • Legen Sie das Gerät vorsichtig mit der Rückseite darauf ab. • Achten Sie darauf, die Schläuche nicht zu beschädigen. • Entfernen Sie den Styroporschutz von der Geräteunterseite. 1 2 • Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht.
www.aeg.com • Entnehmen Sie das Netzkabel und den Ablaufschlauch aus den Schlauchhalterungen. Aus dem Ablaufschlauch könnte Wasser austreten. Dies ist auf den Test mit Wasser im Werk zurückzuführen. • Lösen Sie die drei Schrauben. • Verwenden Sie dazu den mitgelieferten Schraubenschlüssel. • Ziehen Sie die KunststoffAbstandshalter heraus. • Setzen Sie die Kunststoffkappen in die Öffnungen. • Diese Kappen finden Sie im Beutel mit der Gebrauchsanleitung.
DEUTSCH 11 3.3 Montage unter einer Arbeitsplatte Das Gerät kann freistehend oder unter einer Küchenarbeitsplatte in einer Nische mit den entsprechenden Abmessungen montiert werden (siehe Abbildung). 600 mm ≥ 870 mm VORSICHT! Montieren Sie das Gerät nicht in einer abgedichteten Hohlkonstruktion. Stellen Sie sicher, dass die Luft unter dem Boden des Möbels zirkulieren kann.
www.aeg.com 3.5 Wasserzulaufschlauch • Schließen Sie den Schlauch an der Rückseite des Geräts an. Drehen Sie den Wasserzulaufschlauch nur nach links oder rechts. • Lösen Sie die Ringmutter, um ihn in die gewünschte Position zu bewegen. 45 20 O O • Schließen Sie den Wasserzulaufschlauch an einen Kaltwasserhahn mit einem 3/4"Außengewinde an. VORSICHT! Achten Sie darauf, dass die Anschlüsse dicht sind. Verwenden Sie keinen Verlängerungsschlauch, falls der Zulaufschlauch zu kurz ist.
DEUTSCH 13 • Formen Sie den Ablaufschlauch zu einem U. Über eine Waschbeckenkante • Stellen Sie sicher, dass die Kunststoffführung beim Abpumpen nicht herausrutschen kann. Befestigen Sie deswegen die Führung am Wasserhahn oder an der Wand. An ein Standrohr mit Entlüftungsöffnung • Direkte Einleitung in ein Abflussrohr bei einer Höhe von mindestens 60 cm (23,6") und höchstens 100 cm (39,3"). Orientieren Sie sich an der Abbildung. • Das Ende des Ablaufschlauchs muss stets belüftet sein, d. h.
www.aeg.com An einen Siphon • Orientieren Sie sich an der Abbildung. Stecken Sie den Ablaufschlauch in den Siphon und befestigen Sie ihn mit einer Schlauchschelle. • Stellen Sie sicher, dass der Ablaufschlauch einen Bogen beschreibt, damit keine Partikel aus dem Becken in das Gerät gelangen können. An ein Wandrohr • Direkte Einleitung in ein Abflussrohr in der Zimmerwand. Mit einer Schlauchschelle befestigen. Sie können den Ablaufschlauch auf maximal 400 cm verlängern.
DEUTSCH 13 Transportschrauben 15 14 Füße für die Ausrichtung des Geräts 4.2 Einschalten der Kindersicherung Diese Vorrichtung sorgt dafür, dass Kinder oder Haustiere nicht in der Trommel eingeschlossen werden können. Drehen Sie die Vorrichtung im Uhrzeigersinn, bis sich die Einkerbung in waagerechter Lage befindet. Die Tür lässt sich nicht schließen. Zum Schließen der Tür drehen Sie die Vorrichtung gegen den Uhrzeigersinn, bis sich die Einkerbung in senkrechter Lage befindet. 4.
www.aeg.com 5. BEDIENFELD 5.1 Bedienfeldbeschreibung 1 2 3 WASCHEN/TROCKNEN WA S C H E N Feinwäsche Koch/Bunt Leichtbügeln Baumwolle Eco Spülen Schleudern/ Pumpen Baumwolle 5 6 NonStop 3h/3kg Glätten Auffrischen Pflegeleicht Wolle TROCKNEN 4 Pflegeleicht Wolle/ Seide Anti-Allergie 20 Min.
DEUTSCH 17 5.2 Display A K J B I H G C F D E Im Display wird folgendes angezeigt: A Die Textzeile: • Hilft Ihnen bei der Benutzung des Geräts. • Informiert Sie über den Programmstatus und die Programmphase. • Zeigt Fehlermeldungen an. Siehe hierzu „Fehlersuche“. Die Symbole erscheinen im Display, wenn die zugehörige Programmphase oder Funktion eingestellt ist. B Kindersicherung Tür verriegelt C Sie können die Gerätetür nicht öffnen, solange dieses Symbol leuchtet.
www.aeg.com Zahlenbereich Uhrzeit Wenn Sie das Gerät einschalten, zeigt das Display einige Sekunden lang die Uhrzeit an. Informationen zur Änderung der Uhrzeit finden Sie unter „Einstellen der Uhrzeit“. Programmdauer Wenn Sie das Programm einstellen, wird die Programmdauer einige Sekunden lang angezeigt, danach erscheint wieder die Endzeit des Programms. Anzeige Programmdauer Die Anzeige erscheint, sobald die Ziffern die Programmdauer anzeigen.
DEUTSCH 19 Zeit sparen Die Anzeige leuchtet auf, wenn Sie die Programmdauer einstellen. F Verkürzte Programmdauer Extra Kurz G Anzeige für Luftfilter Extra Spülen H Die Zahl steht für die Gesamtzahl der Spülgänge. Der Anzeigebalken füllt sich entsprechend der Anzahl der Spülgänge. Anzeige Flecken Anzeige Vorwäsche I Anzeige Einweichen Der Anzeigebalken füllt sich entsprechend der eingestellten Funktionen.
www.aeg.com 6. PROGRAMME 6.1 Programmübersicht Programm Temperaturbereich Maximale Bela- Programmbeschreibung dung (Beladung und Verschmutzungsgrad) Maximale Schleuderdrehzahl Wasch-/Trockenprogramme1) Koch/Bunt 95 °C – kalt Baumwolle Eco2) 60 °C - 40 °C Pflegeleicht 60 °C – kalt Wolle/Seide 40 °C – kalt 9 kg 1600 U/min Weiße und bunte Baumwollwäsche. Normal und leicht verschmutzt. 9 kg 1600 U/min Weiße und farbechte Baumwollwäsche. Normal verschmutzt.
DEUTSCH Programm Temperaturbereich 21 Maximale Bela- Programmbeschreibung dung (Beladung und Verschmutzungsgrad) Maximale Schleuderdrehzahl Dampfprogramme4) Dampf kann für getrocknete, gewaschene oder einmal getragene Wäsche benutzt werden. Diese Programme können Falten und Gerüche reduzieren und machen Ihre Wäsche weicher. Verwenden Sie kein Waschmittel. Entfernen Sie Flecken bei Bedarf durch Waschen oder einen an der entsprechenden Stelle angewendeten Fleckentferner.
www.aeg.com Programm Temperaturbereich Schleudern/ Pumpen Maximale Bela- Programmbeschreibung dung (Beladung und Verschmutzungsgrad) Maximale Schleuderdrehzahl 9 kg 1600 U/min Alle Gewebearten. Schleudern der Wäsche und Abpumpen des in der Trommel verbliebenen Wassers. Stellen Sie die Schleuderdrehzahl ein. Achten Sie darauf, dass sie für die Wäsche geeignet ist. Wenn Sie die Option Kein Schleudern auswählen, ist nur das Abpumpprogramm verfügbar.
DEUTSCH 23 Mögliche Programmkombinationen ■ Baumwolle Eco ■ ■ ■ ■ Pflegeleicht ■ ■ ■ ■ Wolle/Seide ■ ■ Anti-Allergie ■ ■ Zeitvorwahl ■ Zeit Sparen2) ■ Extra Spülen1) Koch/Bunt Einweichen Flecken ■ U./Min. Vorwäsche Programm ■ ■ ■ ■ ■ ■ 3) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ NonStop 3 Std./3 kg Feinwäsche Leichtbügeln 20 Min.
www.aeg.com 6.2 Programme für das Automatiktrocknen Trockengrad Gewebetyp Beladung Extratrocken Für Frotteewaren Baumwolle und Leinen (Bademäntel, Badetücher usw.) bis zu 6 kg Schranktrocken1) Für Wäsche, die in den Schrank gelegt werden soll Baumwolle und Leinen (Bademäntel, Badetücher usw.) bis zu 6 kg Bügeltrocken Geeignet zum Bügeln Pflegeleichte Wäsche und bis zu 4 kg Mischgewebe (Pullover, Blusen, Unterwäsche, Haushaltswäsche) Baumwolle und Leinen (Betttücher, Tischtücher, Hemden usw.
DEUTSCH 6.4 Woolmark Apparel Care – Blau • Das Waschprogramm Wolle dieser Maschine wurde von The Woolmark Company für das Waschen von Wolltextilien mit der Pflegekennzeichnung „Handwäsche“ zugelassen, vorausgesetzt, dass die Wäschestücke gemäß der Anleitung auf dem Kleidungsetikett und gemäß den Angaben des Maschinenherstellers gewaschen werden. M1230 • Das Programm Wolle trocknen dieses Geräts wurde von The Woolmark Company geprüft und zugelassen.
www.aeg.com Programme Beladung (kg) Baumwolle Eco Baumwolle-Energiesparpro- EnergieWasserververbrauch brauch (Li(kWh) ter) Ungefähre Programmdauer (in Minuten) 9 0.77 78 300 Baumwolle 40 °C 9 1.30 85 210 Pflegeleicht 40 °C 4 0.75 60 140 Feinwäsche 40 °C 4 0.60 60 85 1.5 0.
DEUTSCH automatisch aus, um den Energieverbrauch zu verringern: • Wenn Sie nicht innerhalb von 5 Minuten die Taste Start/Pause drücken. Alle Einstellungen werden gelöscht. Drücken Sie die Taste Ein/Aus, um das Gerät wieder einzuschalten. Stellen Sie das Waschprogramm und die gewünschten Funktionen erneut ein. • 5 Minuten nach Programmende. Siehe „AUTO Standby-Option“. Es können nicht alle Trockenzeiten für verschiedene Wäschearten eingestellt werden. 9.
www.aeg.com • Vorwäsche Verwenden Sie diese Funktion bei stark verschmutzter Wäsche. Das Gerät fügt vor dem Hauptwaschgang einen Vorwaschgang hinzu. Die Programmdauer verlängert sich entsprechend. • Einweichen Verwenden Sie diese Funktion bei stark verschmutzter Wäsche. Das Gerät weicht die Wäsche vor dem Waschgang bei 30 °C für ca. 30 Minuten ein. • Flecken Verwenden Sie diese Funktion für Wäsche mit schwer zu entfernenden Flecken.
DEUTSCH 2. Drehen Sie den Programmwahlschalter, um die Stunde zu ändern. 3. Berühren Sie zur Bestätigung der Auswahl die Taste Start/Pause. Die Minutenziffern blinken. 4. Drehen Sie den Programmwahlschalter, um die Minuten zu ändern. 5. Berühren Sie zur Bestätigung der Auswahl die Taste Start/Pause. 10.3 Einstellen der Sprache Beim ersten Einschalten des Geräts zeigt das Gerät die Standardsprache an und fordert Sie auf, diese Sprache zu bestätigen oder zu ändern. 29 2.
www.aeg.com 11.5 Flüssigwaschmittel oder Waschpulver 1. 1 2 11.4 Einfüllen von Wasch- und Pflegemitteln Öffnen Sie die Waschmittelschublade. 2. A Fach für Vorwasch-, Einweichwaschmittel oder Fleckentferner. Fach für die Hauptwäsche. Fach für flüssige Pflegemittel (Weichspüler, Stärke). Maximaler Füllstand für flüssige Pflegemittel. Klappe für Waschpulver oder Flüssigwaschmittel. Halten Sie sich immer an die Anweisungen auf der Verpackung der Waschmittelprodukte.
DEUTSCH 31 11.7 Neuberechnung der Programmdauer 4. Schließen Sie die Waschmittelschublade. Bei Verwendung von Flüssigwaschmitteln: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. • Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Obergrenze. • Stellen Sie nicht den Vorwaschgang ein. • Stellen Sie nicht die Zeitvorwahl ein. 11.6 Starten eines Programms ohne Zeitvorwahl Berühren Sie die Taste Start/Pause, um das Programm zu starten.
www.aeg.com 3. Berühren Sie Taste Start/Pause erneut. Das Waschprogramm wird fortgesetzt. • Die Tür bleibt verriegelt. • Sie müssen das Wasser abpumpen, um die Tür öffnen zu können: 11.11 Abbrechen eines laufenden Programms 1. Reduzieren Sie, falls erforderlich, die Schleuderdrehzahl. 2. Berühren Sie Taste Start/Pause. Das Gerät pumpt das Wasser ab und schleudert. 3. Wenn das Programm beendet ist und die Anzeige der Türverriegelung erlischt, können Sie die Tür öffnen. 4.
DEUTSCH Falls Signaltöne eingeschaltet sind, ertönt ein Signalton. Im Display erscheint und eine Meldung teilt Ihnen mit, dass das Programm abgeschlossen ist. Die Kontrolllampe der Taste Start/Pause erlischt. 33 2. Nehmen Sie die Wäsche aus dem Gerät. 3. Vergewissern Sie sich, dass die Trommel leer ist. 4. Lassen Sie die Tür und den Luftfilter offen, damit sich kein Schimmel und keine unangenehmen Gerüche bilden. 1. Drücken Sie die Taste Ein/Aus, um das Gerät auszuschalten.
www.aeg.com c. EXTRATROCKEN – 3 Kontrolllampen leuchten: für Baumwollwäsche Es können nicht alle Trockengrade für alle Wäschearten eingestellt werden. Im Display wird die Endzeit und das eingestellte Trockenprogramm angezeigt. 2. Berühren Sie die Taste Start/Pause, um das Programm zu starten. Die Textzeile zeigt an, dass sich das Gerät in der Trockenphase befindet. Das Display zeigt das Türverriegelungssymbol , das Symbol und für das laufende Programm alternativ die Endzeit des Programms an.
DEUTSCH 1. Halten Sie die Ein/Aus-Taste einige Sekunden lang gedrückt, um das Gerät einzuschalten. 2. Füllen Sie die Wäsche Stück für Stück ein. 3. Füllen Sie das Waschmittel und die Pflegemittel in die entsprechenden Fächer. 4. Drehen Sie den Programmwahlschalter auf das Waschprogramm. Im Display werden die Standardwerte für Temperatur und Schleuderdrehzahl angezeigt. Ändern Sie diese, falls dies für Ihre Wäsche erforderlich ist. 5. Stellen Sie die verfügbaren Optionen ein. 13.
www.aeg.com 13.5 Flusen in der Wäsche Während des Wasch- und/oder Trockengangs können sich bei bestimmten Textilarten (Schwammtücher, Wolle oder Sweatshirts) Flusen ablösen. Die abgelösten Flusen können an den Wäschestücken im nächsten Programm anhaften. Dieses Problem verstärkt sich bei technischem Gewebe.
DEUTSCH entsprechenden Textilien in das Gerät geben. Spezial-Fleckentferner sind im Handel erhältlich. Verwenden Sie einen SpezialFleckentferner, der für den jeweiligen Fleckentyp und Gewebetyp geeignet ist. 14.3 Wasch- und Pflegemittel • Verwenden Sie nur speziell für Waschmaschinen bestimmte Waschund Pflegemittel: – Waschpulver für alle Gewebearten, – Waschpulver für Feinwäsche (höchstens 40 °C) und Wolle, – Flüssigwaschmittel, vorzugsweise für Programme mit niedrigen Temperaturen (max.
www.aeg.com 14.8 Pflegekennzeichen 14.11 Allgemeine Tipps Bitte befolgen Sie beim Trocknen von Wäsche die Anweisungen auf den Kleidungsetiketten des Herstellers: Die durchschnittlichen Trockenzeiten können Sie der Tabelle „Trockenprogramme“ entnehmen. Diese hilft Ihnen, Ihre Wäsche je nach Gewebetyp optimal zu trocknen. Bitte beachten Sie die Trockenzeit bereits durchgeführter Trockengänge.
DEUTSCH 39 15.4 Türdichtung Halten Sie sich immer an die Anweisungen auf der Verpackung des Produkts. 15.3 Waschgang zur Pflege der Maschine Bei Waschprogrammen mit niedrigen Temperaturen kann etwas Waschmittel in der Trommel zurückbleiben. Führen Sie regelmäßig einen Waschgang zur Pflege der Maschine durch. Vorgehensweise: Überprüfen Sie die Türdichtung regelmäßig und entfernen Sie ggf. darin verfangene Gegenstände. • Nehmen Sie die Wäsche aus der Trommel. 15.5 Reinigen der Waschmittelschublade 1.
www.aeg.com 15.6 Reinigen der Luftfilter Die Luftfilter halten Flusen zurück. Die Flusen entstehen, wenn die Wäsche in einem Wasch-Trockner getrocknet wird. • Am Ende eines jeden Trockenprogramms leuchtet im Display die Anzeige , um Sie darauf hinzuweisen, dass der Hauptluftfilter gereinigt werden muss. Die Textzeile empfiehlt Ihnen, den Hauptfilter zu reinigen (siehe Abbildungen 1 bis 5). • Gelegentlich blinkt die Anzeige , um Sie daran zu erinnern, dass beide Luftfilter gereinigt werden müssen.
DEUTSCH + 10. 9. Um beste Trockenergebnisse zu erzielen, reinigen Sie die Luftfilter regelmäßig mit warmen Wasser und trocknen Sie sie mit einem Handtuch. Durch verstopfte Filter verlängert sich die Trockenzeit und erhöht sich der Energieverbrauch. WARNUNG! Die Aussparung des Hauptfilters darf nicht durch Gegenstände blockiert werden. Wenn Sie in Ihrem Wasch-Trockner ausschließlich Wäsche waschen, kann sich im Hauptluftfilter Feuchtigkeit ansammeln. 15.
www.aeg.com 1. 2. 2 180° 1 3. 4. 1 2 2 1 5. 6. 7. 8.
DEUTSCH 43 15.8 Reinigen des Zulaufschlauchfilters und Ventilfilters Die Filter müssen in folgenden Fällen gereinigt werden: • Es läuft kein Wasser in das Gerät. • Das Wasser läuft sehr lange in das Gerät ein. • Die Kontrolllampe der Taste Start/Pause blinkt und im Display wird der entsprechende Alarm angezeigt. Siehe hierzu „Fehlersuche“. So reinigen Sie die Wasserzulauffilter: • Schließen Sie den Wasserhahn. • Entfernen Sie den Wasserzulaufschlauch vom Wasserhahn.
www.aeg.com 15.9 Notentleerung Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen. In diesem Fall führen Sie die Schritte (1) bis (8) unter „Reinigen des Ablaufsiebs“ durch. Reinigen Sie bei Bedarf die Pumpe. Wenn Sie das Wasser über die Notentleerung ablassen, müssen Sie das Abpumpsystem wieder einschalten: 1. Gießen Sie zwei Liter Wasser in das Waschmittelfach für die Hauptwäsche. 2. Starten Sie das Programm zum Abpumpen des Wassers.
DEUTSCH 45 16.2 Mögliche Störungen Probleme mit Fehlermeldungen Meldung Mögliche Abhilfe Im Display erscheint die Auf- Stellen Sie sicher, dass der Wasserzulaufhahn geöffnet ist. forderung, den Wasserhahn zu überprüfen: Das Gerät füllt sich nicht mit Wasser. Vergewissern Sie sich, dass der Wasserdruck der Wasserversorgung nicht zu niedrig ist. Diese Informationen erhalten Sie von Ihrem lokalen Wasserversorger. Vergewissern Sie sich, dass der Wasserhahn nicht verstopft und nicht mit Kalk zugesetzt ist.
www.aeg.com Meldung Mögliche Abhilfe Das Display meldet, dass der Vergewissern Sie sich, dass die Filterschublade richtig Luftfilter geprüft werden eingesetzt ist. sollte (die Anzeige blinkt und ein Signal ertönt). Störungen ohne Fehlermeldungen Störung Mögliche Abhilfe Das Programm startet nicht. Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist. Vergewissern Sie sich, dass im Sicherungskasten keine Sicherung ausgelöst hat.
DEUTSCH Störung 47 Mögliche Abhilfe Verwenden Sie ein geeignetes Waschmittel in der richtigen Menge. Vergewissern Sie sich, dass sich die Raumtemperatur im angegebenen Bereich befindet. Stellen Sie sicher, dass die Luft unter dem Gerät zirkulieren kann. Die Tür des Geräts lässt sich nicht öffnen. Vergewissern Sie sich, dass das Waschprogramm beendet ist. Stellen Sie das Abpump- oder Schleuderprogramm ein, wenn sich noch Wasser in der Trommel befindet.
www.aeg.com Störung Mögliche Abhilfe Nach einem Dampfprogramm sind die Kleidungsstücke nicht glatt genug. Achten Sie darauf, das richtige Dampfprogramm einzustellen. Das Gerät trocknet nicht oder nicht richtig. Vergewissern Sie sich, dass die Luftfilter nicht verstopft sind. Prüfen Sie den Hauptluftfilter und Sekundärluftfilter. Vergewissern Sie sich, dass das Ablaufsieb nicht verstopft ist. Vergewissern Sie sich, dass Sie das richtige Programm eingestellt haben.
DEUTSCH VORSICHT! Vergewissern Sie sich, dass die Trommel sich nicht dreht. Warten Sie sonst, bis die Trommel zum Stillstand gekommen ist. Stellen Sie sicher, dass der Wasserstand in der Trommel nicht zu hoch ist. Führen Sie, falls erforderlich, eine Notentleerung durch (siehe „Notentleerung“ im Abschnitt „Reinigung und Pflege“). Öffnen Sie die Tür folgendermaßen: 1. Schalten Sie das Gerät durch Drücken der Taste Ein/Aus aus. 2. Trennen Sie den Netzstecker von der Netzversorgung. 3.
www.aeg.com Max. Trockenladung Schleuderdrehzahl Baumwolle 6 kg Pflegeleicht 4 kg Wolle 1 kg Höchstwert 1600 U/min Das Gerät enthält 0,12 kg fluoriertes HFC - R134a/GWP1430 Gas, das hermetisch verschlossen ist. 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4'' -Außengewinde an. 18. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern.
DEUTSCH 51
157003232-A-202017 www.aeg.