L9WEC06B USER MANUAL DE Benutzerinformation Wasch-Trockner
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................6 3. MONTAGE................................................................................................................... 8 4. GERÄTEBESCHREIBUNG......................................................................................... 13 5.
DEUTSCH 3 Änderungen vorbehalten. 1. SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com • Kinder dürfen keine Reinigung und Wartung ohne Beaufsichtigung durchführen. 1.2 Allgemeine Sicherheit • • • • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor. Das Gerät muss freistehend oder unterhalb der Küchenarbeitsfläche installiert werden, sofern die Platzverhältnisse dies zulassen.
DEUTSCH • • • • • • • • • • • • 5 Überschreiten Sie nicht die maximale Beladungsmenge von 10 kg (siehe Kapitel „Programmübersicht“). Das Gerät muss mit den neu gelieferten Schlauch-Sets oder anderen neuen, vom autorisierten Kundendienst gelieferten Schläuchen an die Wasserversorgung angeschlossen werden. Alte Schläuche dürfen nicht wiederverwendet werden.
www.aeg.com • • • • • Wenn Sie den Wasch-Trockner vor dem Ende des Trockengangs anhalten müssen, entnehmen Sie bitte sofort die gesamte Wäsche und breiten Sie diese aus, damit die Restwärme abgeleitet werden kann. Während der letzten Phase (Abkühlphase) des Trockengangs wird keine Wärme zugeführt, um sicherzustellen, dass Wäschestücke nicht beschädigt werden. Reinigen Sie das Gerät nicht mit einem Wasser- und/ oder Dampfstrahl. Reinigen Sie das Gerät mit einem feuchten Tuch.
DEUTSCH 2.2 Elektrischer Anschluss WARNUNG! Brand- und Stromschlaggefahr. • Das Gerät muss geerdet sein. • Schließen Sie das Gerät unbedingt an eine ordnungsgemäß installierte Schutzkontaktsteckdose an. • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät von der Stromversorgung trennen möchten. Ziehen Sie stets am Netzstecker. • Fassen Sie das Netzkabel oder den Netzstecker nicht mit nassen Händen an.
www.aeg.com • Schneiden Sie das Netzkabel in der Nähe des Geräts ab, und entsorgen Sie es. • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in der Trommel einschließen. • Entsorgen Sie das Gerät nach den lokalen Vorschriften zur Rücknahme und Entsorgung von Elektroaltgeräten (WEEE). 3. MONTAGE WARNUNG! Siehe Kapitel Sicherheitshinweise. 3.1 Auspacken WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben. 3.
DEUTSCH 7. Entfernen Sie den Styroporschutz von der Geräteunterseite. 9 10. Lösen Sie die drei Schrauben mit dem mitgelieferten Schraubenschlüssel. 1 2 8. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. 11. Ziehen Sie die KunststoffAbstandshalter heraus. 12. Setzen Sie die Kunststoffkappen, die sich im Beutel mit der Bedienungsanleitung befinden, in die Löcher ein. 9. Entnehmen Sie das Netzkabel und den Ablaufschlauch aus den Schlauchhalterungen.
www.aeg.com 3.2 Montage unter einer Arbeitsplatte 600 mm ≥ 870 mm 630 mm Das Gerät kann freistehend oder unter einer Küchenarbeitsplatte in einer Nische mit den entsprechenden Abmessungen montiert werden (siehe Abbildung). VORSICHT! Montieren Sie das Gerät nicht in einer abgedichteten Hohlkonstruktion. Stellen Sie sicher, dass die Luft unter dem Boden des Möbels zirkulieren kann.
DEUTSCH 11 Kaltwasserhahn mit einem 3/4"Außengewinde an. Wird das Gerät auf einem Sockel installiert oder wird ein Wasch-Trockner über der Waschmaschine installiert, verwenden Sie das im Kapitel „Zubehör“ beschriebene Zubehör. Lesen Sie die dem Gerät und dem Zubehör beiliegenden Anleitungen sorgfältig durch. VORSICHT! Achten Sie darauf, dass die Anschlüsse dicht sind. Verwenden Sie keinen Verlängerungsschlauch, falls der Zulaufschlauch zu kurz ist.
www.aeg.com Sie können den Ablaufschlauch auf maximal 400 cm verlängern. Fragen Sie beim autorisierten Kundendienst nach einem anderen Ablaufschlauch und der Schlauchverlängerung. Ablaufrohr. Orientieren Sie sich an der Abbildung. Der Ablaufschlauch kann auf unterschiedliche Weise angeschlossen werden: 1. Formen Sie den Ablaufschlauch zu einem U und verlegen Sie ihn in der Kunststoffführung. 2. Am Rande eines Beckens Befestigen Sie die Führung am Wasserhahn oder an der Wand.
DEUTSCH Stellen Sie sicher, dass der Ablaufschlauch einen Bogen beschreibt, damit keine Partikel aus dem Becken in das Gerät gelangen können. 6. Stecken Sie den Schlauch direkt in ein Abflussrohr in der Zimmerwand und befestigen Sie ihn mit einer Schlauchschelle. 4. GERÄTEBESCHREIBUNG 4.
www.aeg.com 5. BEDIENFELD 5.1 Bedienfeldbeschreibung 3 2 1 Programma/Programme Tijd Minuterie Katoen Blanc/Couleurs Katoen Coton Eco Synthetica Synthétiques Fijne was Délicats Outdoor 4 Wassen Lavage 5 Drogen Séchage NonStop 3h/3kg Stoom Vapeur Temp.
DEUTSCH 15 Anzeige der max. Beladung. Das Symbol blinkt während der Messung der Wäschemenge (siehe Abschnitt „PROSENSE Beladungserkennung“). Anzeige des max. zulässigen Wäschegewichts. Blinkt, wenn das Wäschegewicht die maximal zulässige Füllmenge für das ausgewählte Programm überschreitet. Kindersicherungsanzeige. Trockenzeitanzeige. Türverriegelungsanzeige. Die Digitalanzeige zeigt Folgendes an: • Programmdauer (z. B. • Zeitvorwahl (z. B. , Wasch- und/oder Trockengang). oder ). • Programmende ( ).
www.aeg.com Spülstoppanzeige. Anzeige Extra Leise. Vorwäscheanzeige. Fleckenanzeige. ECO Energiesparanzeigen. Sie erscheinen, wenn das Programm Katoen Eco - Coton Eco eingestellt ist. Zeitvorwahlanzeige. 6. PROGRAMMWAHLSCHALTER UND TASTEN 6.1 Aan/Uit - Marche Arrêt 6.3 Temp.°C Halten Sie diese Taste einige Sekunden lang gedrückt, um das Gerät ein- oder auszuschalten. Beim Ein- und Ausschalten ertönen zwei verschiedene Melodien.
DEUTSCH Auf dem Display erscheint die Anzeige . Die Trommel dreht sich regelmäßig, um Knitterfalten in der Wäsche zu vermeiden. Die Tür bleibt verriegelt. Die Trommel dreht sich regelmäßig, um Knitterfalten in der Wäsche zu vermeiden. Sie müssen das Wasser abpumpen, um die Tür entriegeln zu können. Berühren Sie die Taste Start/Pauze Départ/Pause. Das Gerät führt den Schleudergang aus und pumpt das Wasser ab. • Die Option Leise einzuschalten.
www.aeg.com • Ist Ihre Wäsche normal oder leicht verschmutzt, empfiehlt es sich, das Waschprogramm zu verkürzen. Berühren Sie die Taste einmal, um die Dauer zu verkürzen. • Berühren Sie die Taste bei geringerer Beladung zweimal, um ein besonders kurzes Programm einzustellen. Im Display wird die Programmdauer entsprechend angepasst. Ist diese Option gewählt, leuchtet die LED über der Taste. Diese Option kann auch zur Verkürzung des Stoom Vapeur-Programms verwendet werden.
DEUTSCH 19 7. PROGRAMME 7.1 Programmübersicht Programm Programmbeschreibung Waschprogramme Katoen - Blanc/Couleurs Katoen Eco - Coton Eco Weiße und bunte Baumwollwäsche. Normal und leicht verschmutzt. Weiße und bunte Baumwollwäsche. Normal und leicht verschmutzt. Baumwolle-Energiesparprogramm. Dieses Programm ist bei 60 °C mit einer Beladung von 10 kg in Übereinstimmung mit EWG 92/75 das Referenzprogramm für die im Energielabel eingetragenen Werte.
www.aeg.com Programm Programmbeschreibung NonStop 3h/3kg Mischgewebe (Baumwolle und Synthetik). Komplettprogramm zum Waschen und Trocknen von bis zu 3 kg in einem Durchgang. Es dauert nur 3 Stunden. Die Anzeige erscheint ebenfalls im Display. Dampfprogramm Dampfprogramme2) Stoom - Vapeur Dampf kann für getrocknete, gewaschene oder einmal getragene Wäsche benutzt werden. Diese Programme können Falten und Gerüche reduzieren und machen Ihre Wäsche weicher. Verwenden Sie kein Waschmittel.
DEUTSCH Programmtemperatur, maximale Schleuderdrehzahl und maximale Beladung Programm Standardtemperatur Temperaturbereich Maximale Schleuder- Maximale Beladrehzahl dung Schleuderdrehzahlbereich Katoen - Blanc/Couleurs 40 °C 95 °C – kalt 1600 U/min 1600 U/min - 400 U/min 10 kg Katoen Eco - Coton Eco 40 °C 60 °C - 40 °C 1600 U/min 1600 U/min - 400 U/min 10 kg 40 °C 60 °C – kalt 1200 U/min 1200 U/min - 400 U/min 4 kg 40 °C 40 °C – kalt 1200 U/min 1200 U/min - 400 U/min 4 kg 40 °C Wol/Handwas
www.aeg.
■ ■ ■ ■ ■ ■ ■ ■ ■4) 23 Centrifugeren/Pompen - Essorage/Vidange ■ Spoelen - Rinçage ■ Stoom - Vapeur ■ NonStop 3h/3kg ■ Outdoor Fijne was - Délicats ■ Wol/Handwas - Lavage à la main Synthetica - Synthétiques Tijd besparen - Katoen Eco - Coton Eco Optionen Katoen - Blanc/Couleurs Programm DEUTSCH ■ Gain de temps3) Anti-kreuk - Antifroissage Tijd - Minuterie Droogtegraad Niveau séchage ■ ■ ■ ■ 1) Stellen Sie die Option Kein Schleudern ein, wird lediglich das Wasser aus dem Ge
www.aeg.com 7.2 Woolmark Apparel Care – Blau • Das Waschprogramm Wolle dieser Maschine wurde von The Woolmark Company für das Waschen von Wolltextilien mit der Pflegekennzeichnung „Handwäsche“ zugelassen, vorausgesetzt, dass die Wäschestücke gemäß der Anleitung auf dem Kleidungsetikett und gemäß den Angaben des Maschinenherstellers gewaschen werden. M1230 • Das Programm Wolle trocknen dieses Geräts wurde von The Woolmark Company geprüft und zugelassen.
DEUTSCH Trockengrad Gewebetyp Beladung Bügeltrocken Bügeltrocken Baumwolle und Leinen (Betttücher, Tischtücher, Hemden usw.) bis zu 6 kg 25 1) Hinweise für Prüfinstitute Das Prüfverfahren gemäß EN 50229 muss mit einer ERSTEN Trocknerbeladung bei maximaler angegebener Trockenleistung (Wäschezusammensetzung gemäß EN61121) mit dem AUTOMATIKPROGRAMM SCHRANKTROCKEN für Katoen Eco - Coton Eco durchgeführt werden.
www.aeg.com 8. VOR DER ERSTEN INBETRIEBNAHME 1. Stellen Sie sicher, dass alle Transportsicherungen aus dem Gerät entfernt wurden. 2. Achten Sie darauf, dass Spannung vorhanden und der Wasserhahn aufgedreht ist. 3. Gießen Sie 2 Liter Wasser in das Waschmittelfach mit der Markierung . Hierdurch wird das Abpumpsystem aktiviert. 4. Geben Sie eine kleine Menge Waschmittel in das Fach mit der Markierung . 5.
DEUTSCH 27 10. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel Sicherheitshinweise. 10.1 Einschalten des Geräts 1. Stecken Sie den Netzstecker in die Netzsteckdose. 2. Öffnen Sie den Wasserhahn. 3. Halten Sie die Taste Aan/Uit Marche Arrêt einige Sekunden lang gedrückt, um das Gerät einzuschalten. Die Kontrolllampe der Taste Start/Pauze - Départ/Pause beginnt zu blinken.
www.aeg.com Entfernen Sie nach dem Waschgang bei Bedarf Waschmittelreste aus der Waschmittelschublade. 10.4 Überprüfen Sie die Position der Klappe 1. Ziehen Sie die Waschmittelschublade bis zum Anschlag heraus. 2. Drücken Sie den Hebel nach unten und ziehen Sie die Schublade heraus. 1 2 3. Drehen Sie die Klappe nach oben, wenn Sie Waschpulver verwenden. Klappe in der UNTEREN Position: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz.
DEUTSCH gewünschte Waschprogramm. Die entsprechende Programmanzeige leuchtet auf. Die Kontrolllampe der Taste Start/Pauze - Départ/Pause blinkt. Das Display zeigt die maximal zulässige Füllmenge für das Programm, die Standardtemperatur, die maximale Schleuderdrehzahl, die Programmphasen (falls verfügbar) und die voraussichtliche Programmdauer an. 2. Berühren Sie die entsprechenden Tasten, um die Temperatur und/oder Schleuderdrehzahl zu ändern. 3.
www.aeg.com 10.8 ProSense Beladungserkennung Die Programmdauer im Display bezieht sich auf eine mittlere/hohe Beladung. Nach Berühren der Taste Start/Pauze Départ/Pause, erlischt die Anzeige für die maximal zulässige Füllmenge, die Die ProSense Erkennung wird nur bei vollständigen Waschprogrammen ausgeführt (wenn keine Phase übersprungen wird). 10.
DEUTSCH 2. Drücken Sie die Taste Aan/Uit Marche Arrêt erneut, um das Gerät einzuschalten. Anschließend können Sie ein neues Waschprogramm einstellen. Wurde die ProSense-Phase bereits beendet und läuft Wasser in das Gerät ein, startet das neue Programm ohne die ProSense-Phase zu wiederholen. Um Wasser und Waschmittel nicht zu verschwenden, wird das Wasser nicht abgepumpt. Das Display zeigt die maximale Programmdauer an, die etwa 20 Minuten nach dem Start des neuen Programms aktualisiert wird. 10.
www.aeg.com Anzeige der Programmphase blinkt. • Die Trommel dreht sich regelmäßig weiter, um Knitterfalten in der Wäsche zu vermeiden. • Die Tür bleibt verriegelt. • Sie müssen das Wasser abpumpen, um die Tür öffnen zu können: 1. Berühren Sie bei Bedarf die Taste TPM, um die vom Gerät vorgeschlagene Schleuderdrehzahl zu verringern. 2. Berühren Sie die Taste Start/Pauze Départ/Pause: gewählt haben, • Wenn Sie pumpt das Gerät das Wasser ab und schleudert.
DEUTSCH 1. Halten Sie die Aan/Uit - Marche Arrêt-Taste einige Sekunden lang gedrückt, um das Gerät einzuschalten. 2. Füllen Sie die Wäsche Stück für Stück ein. 3. Füllen Sie das Waschmittel und die Pflegemittel in die entsprechenden Fächer. 4. Drehen Sie den Programmwahlschalter auf das Waschprogramm. Im Display werden die Standardwerte für Temperatur und Schleuderdrehzahl angezeigt. Ändern Sie diese, falls dies für Ihre Wäsche erforderlich ist.
www.aeg.com Die Mindestdauer für das zeitgesteuerte Trocknen beträgt 10 Minuten. Durch jedes Tippen auf diese Taste erhöht sich der Wert um 5 Minuten. Die neu eingestellte Trockenzeit erscheint auf dem Display. 2. Berühren Sie Start/Pauze - Départ/ Pause, um das Programm zu starten. Die PROSENSE Erkennung startet. Im Display erscheint die Türverriegelungsanzeige , und die Anzeige der Programmphase blinkt. Das Display zeigt auch die Restlaufzeit an. 11.
DEUTSCH 12.2 Trocknen Automatikstufen 1. Tippen Sie wiederholt auf die Taste Droogtegraad - Niveau séchage, bis im Display der gewünschte Trockengrad angezeigt wird. Die Anzeigen im Display leuchten entsprechend: a. Bügeltrocken: für Baumwollwäsche b. Schranktrocken: für Baumwolle und pflegeleichte Textilien Extra Trocken: für Baumwollwäsche Im Display wird die Dauer des Trockenprogramms angezeigt. c.
www.aeg.com 13. FLUSEN IN DER WÄSCHE Während des Wasch- und/oder Trockengangs können sich bei bestimmten Textilarten (Schwammtücher, Wolle oder Sweatshirts) Flusen ablösen. Die abgelösten Flusen können an den Wäschestücken im nächsten Programm anhaften. Dieses Problem verstärkt sich bei technischem Gewebe.
DEUTSCH a. Unterbrechen Sie das Programm und öffnen Sie die Tür (siehe Abschnitt „Täglicher Gebrauch“). b. Verteilen Sie die Wäsche mit der Hand neu, so dass die Wäschestücke gleichmäßig verteilt sind. c. Drücken Sie die Taste Start/ Pauze - Départ/Pause. Die Schleuderphase wird fortgesetzt. 14.2 Hartnäckige Flecken Für manche Flecken sind Wasser und Waschmittel nicht ausreichend. Wir empfehlen, diese Flecken vorzubehandeln, bevor Sie die entsprechenden Textilien in das Gerät geben.
www.aeg.com • • • • • • • • Kleidungsstücke mit Metalleinsätzen. Nylonstrümpfe. Steppdecken. Bettdecken. Daunen. Anoraks. Schlafsäcke. Gewebe mit Resten von Haarsprays, Nagellackentferner oder ähnlichen Lösungsmitteln. • Kleidungsstücke aus Schaumgummi oder ähnlichen schwammartigen Materialien. 14.
DEUTSCH Prüfen Sie die Trommel regelmäßig auf Kalkablagerungen. Herkömmliche Waschmittel enthalten Wasserenthärtungsmittel, wir empfehlen dennoch gelegentlich ein Programm mit leerer Trommel und einem Entkalker durchzuführen. Halten Sie sich immer an die Anweisungen auf der Verpackung des Produkts. 15.
www.aeg.com 4. Setzen Sie die Waschmittelschublade in die Führungsschienen ein und schließen Sie sie. Starten Sie das Spülprogramm ohne Wäsche in der Trommel. 3. Stellen Sie sicher, dass alle Waschmittelreste an der Ober- und Unterseite der Aufnahme entfernt wurden. Reinigen Sie die Schubladenaufnahme mit einer kleinen Bürste. 15.7 Reinigen der Luftfilter Die Luftfilter halten Flusen zurück. Die Flusen entstehen, wenn die Wäsche in einem Wasch-Trockner getrocknet wird.
DEUTSCH LL PU PU LL 3. 4. U P L L 5. 6. 7. 8. + 9. 10. Um beste Trockenergebnisse zu erzielen, reinigen Sie die Luftfilter regelmäßig mit warmen Wasser und trocknen Sie sie mit einem Handtuch. Durch verstopfte Filter verlängert sich die Trockenzeit und erhöht sich der Energieverbrauch. WARNUNG! Die Aussparung des Hauptfilters darf nicht durch Gegenstände blockiert werden. Wenn Sie in Ihrem Wasch-Trockner ausschließlich Wäsche waschen, kann sich im Hauptluftfilter Feuchtigkeit ansammeln.
www.aeg.com 15.8 Reinigen der Ablaufpumpe WARNUNG! Ziehen Sie den Netzstecker aus der Netzsteckdose. Kontrollieren Sie regelmäßig das Ablaufpumpensieb und sorgen Sie dafür, dass es sauber ist. 2. Stellen Sie einen geeigneten Behälter unter die Öffnung der Ablaufpumpe, um das abfließende Wasser aufzufangen. 3. Öffnen Sie den Schacht nach unten. Halten Sie beim Herausnehmen des Siebs einen Lappen bereit, um austretendes Wasser aufzuwischen.
DEUTSCH 43 11. Setzen Sie das Sieb wieder in die dafür vorgesehenen Führungen ein und drehen Sie es im Uhrzeigersinn. Achten Sie darauf, dass Sie das Sieb richtig fest anziehen, um Wasserlecks zu vermeiden. 2 1 2 8. Entfernen Sie gegebenenfalls Flusen und Fremdkörper aus der Siebaufnahme. 9. Prüfen Sie, ob sich das Flügelrad der Pumpe drehen lässt. Ist dies nicht möglich, wenden Sie sich an den autorisierten Kundendienst. 1 12. Schließen Sie die Pumpenabdeckung. 2 1 10.
www.aeg.com So reinigen Sie die Wasserzulaufsiebe: • Schließen Sie den Wasserhahn. • Entfernen Sie den Wasserzulaufschlauch vom Wasserhahn. • Reinigen Sie das Sieb im Zulaufschlauch mit einer harten Bürste. 1 2 3 • Entfernen Sie den Zulaufschlauch von der Geräterückseite. • Reinigen Sie das Sieb im Ventil mit einer harten Bürste oder einem Handtuch. • Bringen Sie den Zulaufschlauch wieder an. Vergewissern Sie sich, dass alle Anschlüsse vollkommen dicht sind, damit kein Wasser austreten kann.
DEUTSCH 1. Gießen Sie zwei Liter Wasser in das Waschmittelfach für die Hauptwäsche. 2. Starten Sie das Programm zum Abpumpen des Wassers. 15.11 Frostschutzmaßnahmen Falls das Gerät in einem Bereich installiert ist, in dem die Temperatur um 0 °C erreichen oder unter 0 °C sinken kann, entfernen Sie das im Zulaufschlauch und in der Ablaufpumpe verbliebene Wasser. 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2. Schließen Sie den Wasserhahn. 3.
www.aeg.com 16.2 Mögliche Störungen Störungen, die durch Fehlermeldungen angezeigt werden Meldung Mögliche Abhilfe • Stellen Sie sicher, dass der Wasserzulaufhahn geöffnet : Das Gerät füllt sich nicht ist. mit Wasser. • Vergewissern Sie sich, dass der Wasserdruck der Wasserversorgung nicht zu niedrig ist. Diese Informationen erhalten Sie von Ihrem lokalen Wasserversorger. • Vergewissern Sie sich, dass der Wasserhahn nicht verstopft und nicht mit Kalk zugesetzt ist.
DEUTSCH 47 Meldung Mögliche Abhilfe : Reinigen Sie den Luftfilter. • Stellen Sie sicher, dass der Luftfilter gereinigt wurde. • Vergewissern Sie sich, dass der Luftfilter richtig eingesetzt ist. Störungen ohne Fehlermeldungen Störung Mögliche Abhilfe Das Programm startet nicht. • Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist. • Vergewissern Sie sich, dass im Sicherungskasten keine Sicherung ausgelöst hat.
www.aeg.com Störung Mögliche Abhilfe Die Tür des Geräts lässt sich nicht öffnen. • Vergewissern Sie sich, dass das Waschprogramm beendet ist. • Stellen Sie das Abpump- oder Schleuderprogramm ein, wenn sich noch Wasser in der Trommel befindet. • Stellen Sie sicher, dass das Gerät mit Spannung versorgt wird. • Das Problem kann durch eine Gerätestörung verursacht werden. Wenden Sie sich an einen autorisierten Kundendienst.
DEUTSCH Störung Mögliche Abhilfe Die Wäsche ist voller verschiedenfarbiger Flusen. • Starten Sie das spezielle Reinigungsprogramm CLE, um die Flusen zu entfernen (weitere Einzelheiten finden Sie unter „Flusen in der Wäsche“). • Reinigen Sie die Wäschestücke mit einem Flusenentferner. 49 Schalten Sie das Gerät nach der Überprüfung wieder ein. Das Programm wird an der Stelle fortgesetzt, an der es unterbrochen wurde. Tritt das Problem erneut auf, wenden Sie sich an den autorisierten Kundendienst.
www.aeg.com 17. VERBRAUCHSWERTE Die angegebenen Werte wurden unter Laborbedingungen gemäß den einschlägigen Normen gemessen. Folgende Faktoren können diese Werte verändern: Wäscheart und -menge sowie Raumtemperatur. Der Wasserdruck, die Versorgungsspannung und die Temperatur des einlaufenden Wassers können sich auch auf die Dauer des Waschprogramms auswirken. Die technischen Daten des Produkts können auf Grund von Verbesserungen ohne vorherige Ankündigung geändert werden.
DEUTSCH Die Schutzverkleidung gewährleistet einen Schutz gegen das Eindringen von festen Fremdkörpern und Spritzwasser (Feuchtigkeit), außer an den Stellen, an denen das Niederspannungsgerät keinen Schutz gegen Feuchtigkeit besitzt. IPX4 Wasseranschluss 1) Kaltwasser Wasserdruck Minimum Maximum 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Umgebungstemperatur Minimum Maximum 5 °C 35 °C Maximale Beladung Baumwolle Pflegeleicht Wolle 10 kg 4 kg 1.5 kg Max.
www.aeg.com Lesen Sie die mit dem Zubehör gelieferte Gebrauchsanleitung sorgfältig durch. 20. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie * Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
DEUTSCH 53
www.aeg.
DEUTSCH 55
157014351-A-382017 www.aeg.