ÖKO-LAVAMAT 74620 update The environmentally friendly washing machine Instruction book
Dear customer, Please read these user instructions carefully. Above all, observe the "Safety" section in the first pages. Keep these user instructions in a safe place for future reference. Please pass them along to future owners of the appliance. Important information concerning your safety and proper functioning of the appliance is highlighted with the warning triangle or the signal words (Warning!, Caution!, Attention!). Please observe carefully. 0 1.
Contents CONTENTS Operating instructions .................................... 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Environmental protection tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Program Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Rinsing/Starching/Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . Separate Gentle Rinsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permissible water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water drain-off . . . . . . . . . . . . . . . . . . . . . .
OPERATING INSTRUCTIONS 1 Safety The safety standards of AEG electric appliances are in keeping with the recognised rules of technology and the law governing the safety of appliances. Nevertheless as a manufacturer we are committed to familiarise you with the following safety instructions: Prior to initial start-up • Observe the "Installation and Connection Instructions" below in these user instructions.
Operating instructions • Use tap water only. Rain water and industrial water may only be used if they fulfil requirements in accordance with DIN1986 and DIN1988. • Damage due to frost is not covered by the guarantee! If the washing machine is located in a room in which below freezing temperatures might occur, emergency draining must be carried out if danger of freezing occurs (see "Emergency Draining"). Furthermore, the inlet hose must be disconnected from the tap and laid on the floor.
Operating instructions • Never remove the mains plug by pulling on the cable. Always grip the plug. • Octopus plugs, couplings and extension cables may not be used. Danger of overheating! • Do not clean the washing machine with a jet stream of water. Danger of electrical shock! • When high temperature washing programs are selected, the glass in the fill-in door becomes hot.
Operating instructions 2 Environmental protection tips • No pre-wash is required for normally soiled washing. This saves you detergent, water and time (and is good for the environment!). • If the indicated load capacities are taken full advantage of, the washing machine is especially efficient. • For small loads, use only one half to one third of the recommended detergent quantity. • Stains and soiling confined to given areas can be removed by means of appropriate pre-treatment.
Operating instructions Description of the Appliance Front View Control Panel Drawer for detergent and softener Rating plate (behind door) Door with handle Flap in front of the circulation pump Threaded feet (height adjustable) right rear: automatically adjusting foot Drawer for detergent and conditioner 10 k Pre-wash detergent/ detergent for soaking or water softener l Main wash detergent (powder) and water softener if required m Stain remover w Liquid conditioner (softener, finisher, starch
Operating instructions Control Panel Program Progress Display Program Selector DOOR Indicator Spin Speed/RINSE HOLD Button Additional Program Buttons START/PAUSE Button DELAY TIMER button Multi-Display OVERDOSING Indicator Program selector The program selector defines the nature of the washing cycle (e.g. water level, drum movement, number of rinses, spin speed) to suit the type of washing, as well as the wash temperature.
Operating instructions (DELICATES) Main washing cycle for delicates at 30 °C or 40 °C. /P (WOOLLENS/Hand Washing) Main washing cycle ( /cold to 40 °C) for machine washable wool as well as for hand washable woollen fabrics and silk with the care symbol ï (Hand Washables). (GENTLE RINSE) Separate gentle rinse, e.g. for rinsing hand washed textiles (2 rinse cycles and short spin).
Operating instructions (STAIN) For treating heavily soiled or stained washing. (Stain remover is washed in from the m compartment at the optimal point in the program cycle.) 3 When the / P (WOOLLENS/Hand washing) setting is chosen, the additional programs cannot be selected (any buttons pressed do not have any effect). Consumption data and required time The values for the selected programs in the following table have been determined under standard conditions.
Operating instructions What does "update" mean? New fabrics or new detergents could, in the future, require a new washing technique (e. g. an additional rinse, more water to wash in the detergent, ...). Your washing machine is prepared for this eventuality. The controller is fully electronic. The software in which the controller is defined can be re-programmed. If a new state of the art is achieved in washing technology, you can bring your washing machine up to the latest standard with an update.
Operating instructions Prepare washing cycle Sort washing and prepare • Sort washing according to care symbol and type (see "Washing types and care symbols"). • Empty all pockets. • Remove metal objects (paper clips, safety pins etc.). • In order to prevent bunching up of washing and damage to washing, close zippers, button up duvets and pillow cases, and tie up loose ends from, for example, aprons. • Turn articles with double layered textiles inside out (sleeping bags, anoraks etc.).
Operating instructions Washing types and care symbols Care symbols assist in the selection of the correct washing program. Washing should be sorted according to type and care symbol. The temperatures indicated in the care symbols are maximum temperatures. Cottons ç Textiles made from cotton and linen which bear this care symbol are insensitive to mechanical stress and high temperatures. The (COTTONS/LINEN) program is appropriate for this type of washing.
Operating instructions Detergent and conditioner Which detergent and conditioner? Use only detergents and conditioners which are suitable for use in washing machines. Always observe the manufacturer’s instructions. How much detergent and conditioner? The required quantity depends upon: • the amount of washing 2 If the detergent manufacturer does not include dosing instructions for reduced loads, use one third less for half loads and only half of the full load detergent quantity for very small loads.
Operating instructions Performing A Washing Cycle Brief Instructions A washing cycle is performed in the following steps: 0 1. Set the correct washing program: – select the program and the temperature with the program selector – select additional program(s) if required 2. If required, change the spin speed/select (RINSE HOLD). 3. Set the (DELAY TIMER) if necessary. 4. Open the door, load the washing. 5. Close the door. 6. Add detergent/conditioner. 7. Start the washing program.
Operating instructions Set the washing program See "Program Tables" for suitable program, correct temperature and possible additional programs for various types of washing. 0 1. Set program selector to the desired program with the desired temperature. The anticipated duration of the selected program appears in the multi-display in minutes. 3 2. If necessary select additional program(s): The indicators for the additional programs selected illuminate. – To change the selection press another button.
Operating instructions Setting the Delay Timer 0 If necessary set the delay timer: Press the (DELAY TIMER) button repeatedly until the desired time delay is displayed in the multi-display, for example 12h for a 12 hour delay start of the program. 3 If 19h is displayed and you press the button again, the duration of the washing program set appears (displayed in minutes, e.g. 119). In this condition the start delay timer is not set.
Operating instructions Add detergent/conditioner For instructions concerning detergents and conditioners see "Detergents and Conditioners". 0 1. Open drawer: press in the flap on the drawer so as to be able to grasp the handle (1), pull out the drawer (2). 2. Add detergent/conditioner. 3 k Pre wash detergent/detergent for soaking - only for additional programs (PRE WASH)/ (SOAKING) - or water softener.
Operating instructions Starting the Washing Program 0 1. Check whether the water tap is open. 2. Start the washing program: Press the (START/PAUSE) button. The washing program is started, or starts at the end of the time delay set. 3 If the (DOOR) indicator flashes red when the START/PAUSE button is pressed, the door is not properly closed. Close the door firmly and press the (START/PAUSE) button again.
Operating instructions Washing Program Sequence Program Progress Display Prior to the start, the program steps chosen are displayed on the program progress display. During the washing program, the current program step is displayed. Multi-Display The expected time remaining (in minutes) to the end of the program is displayed on the multi-display.
Operating instructions Washing Cycle Complete/Removing the Washing Once the washing program has come to an end, (END) illuminates on the program progress display. If (RINSE HOLD) was selected, the indicator beside the START/PAUSE button flashes. 0 1.
Operating instructions Program Tables Washing Not all possible settings are given in the following, but only those that are useful and meaningful in everyday use. Type of Washing, Care Symbol Max.
Operating instructions Type of Washing, Care Symbol Max. Load (Weight Dry)1) Program Selector Temperature Possible Additional Programs (PRE WASH) (SOAKING) Easy-Cares ê í î 2.5kg (EASY-CARES) 30 to 60 (QUICK WASH) (STAIN) (PRE WASH) Delicates ì 2.5kg (or 15-20m2 Net Curtains) (SOAKING) (DELICATES) 30, 40 (QUICK WASH) (STAIN) Woollens/Hand Washing 9 ì ï 2kg /P (WOOLLENS/Hand Washing) (COLD) to 40 1) A 10-litre bucket contains about 2.5 kg of dry washing (cotton).
Operating instructions Separate Rinsing/Starching/Conditioning Type of Washing Cottons/Linen Max. Load (Weight Dry) Program Selector 5kg Easy-Cares 2.5kg Delicates 2.5kg (STARCHING) Separate Gentle Rinsing Type of Washing Cottons/Linen Max. Load (Weight Dry) 5kg Easy-Cares 2.5kg Delicates 2.5kg Woollens/Hand Washing Program Selector (GENTLE RINSE) 2kg Separate Spinning Type of Washing Cottons/Linen Max. Load (Weight Dry) 5kg Easy-Cares 2.5kg Delicates 2.
Operating instructions Cleaning and Caring Control panel 0 Attention! Do not use furniture care products or aggressive cleansers for cleaning control panels and control elements. Wipe control panels with a moist cloth. Use warm water. Detergent drawer The detergent drawer should be cleaned from time to time. 0 1. Pull the detergent drawer out as far as it will go. 2. Remove the detergent drawer by pulling sharply. 3. Remove siphon cap. 4. Clean the siphon cap under running water. 5.
Operating instructions Washing drum 0 The washing drum is made of rust-free stainless steel. Rusty objects in the washing drum may lead to rust deposits on the drum. Attention! Do not clean the stainless steel drum with acid containing decalcifying agents, abrasives containing chlorine or iron, or steel wool. Appropriate cleansers are available from our customer service department. Remove rust deposits at the drum with a stainless steel cleanser.
Operating instructions What to do when… 3 The somewhat different, in comparison to older washing machines, whistling noise during spinning is due to the modern drive system. A rattling sound on startup – in particular when using for the first time – is caused by the circulation pump and is due to the design. Trouble Shooting In the event of a malfunction, try to eliminate the problem yourself with the help of the instructions listed here.
Operating instructions Malfunction Error code (d appears Washing machine vibrates during operation or is unstable. Excessive foaming during the main wash Possible Cause Remedy Door is probably not closed properly. Close the door again. Press the door firmly in the area of the lock. The height adjustable threaded feet are not correctly adjusted. Adjust the feet as per the installation and connection instructions. There is only very little washing in the drum (e.g. only a Function is not impaired.
Operating instructions Malfunction Washing is not spun properly, water is still visible in the drum. Error code (2 is displayed. Possible Cause Remedy Drain hose is kinked. Remove kink. Maximum pumping height (drain height 1m above the floor on which the machine is standing) exceeded. Please contact customer service who have a retrofit kit for pumping to heights of greater than 1m. Circulation pump is blocked. Switch off the machine and unplug from the mains, clean the circulation pump.
Operating instructions If the washing results are not satisfactory If the washing is grey and there are calcium deposits in the drum • Too little detergent was used. • The wrong detergent was used. • Special soiling was not pre-treated. • Program or temperature not set correctly. • When using component detergents, the individual components were not used in the correct proportions.
Operating instructions Perform emergency drain • If the washing machine no longer pumps out the water then an emergency drain must be performed. • If the washing machine is located in a room in which below freezing temperatures might occur, emergency draining must be carried out if danger of freezing occurs. Furthermore, the inlet hose must be disconnected from the tap and laid on the floor. Warning! Switch the washing machine off and pull the mains plug prior to emergency draining.
Operating instructions When the water is completely drained: 7. Press the end stop firmly back into the emergency drain hose. 8. Push the emergency drain hose back in a little and allow it to snap into the mounting. 9. Put on the flap and close. The ECO valve does not function when the machine has been fully emptied. Therefore add approx. 1liter of water before the next wash (pour in through the detergent drawer).
Operating instructions Emergency release for fill-in door If the fill-in door can no longer be opened (e.g. due to a defective door release or power failure during the washing program), it can be opened with the help of the emergency release. 0 1. If water can be seen at the window in the fill-in door, perform emergency draining first (see "Perform Emergency Drain"). 2. Turn the rotating knob anticlockwise with the help of a coin or a screwdriver. 3. Open the door by pulling on the door handle.
Operating instructions Enabling the additional rinse function: (SHORT SPIN). 0 1. Turn the program selector to 2. Press the (SOAKING) button for at least 5 seconds. After the button has been kept pressed for 5 seconds, flashes on the program progress indicator for 5 seconds. (RINSE+) 3. Release the (SOAKING) button while (RINSE+) is flashing. The additional rinse function is enabled once the flashing has ceased. It continues to be enabled until specifically disabled.
Operating instructions Wash Water Cooling 3 The wash water is cooled prior to pumping out at the end of the main washing cycle (by adding cold water). (This setting is only effective for (COTTONS/LINEN) at a temperature of over 40 °C.) As supplied from the factory, the wash water cooling function is not enabled. Enabling the wash water cooling function: (SHORT SPIN). 0 1. Turn the program selector to 2. Press the (PRE WASH) button for at least 5 seconds.
Installation and Connection Instructions INSTALLATION AND CONNECTION INSTRUCTIONS Installation Safety Precautions • Do not tip the washing machine over the front or the left side (seen from the front). Electrical components could become wet! • Check the washing machine for transport damages. You should never connect a damaged appliance. In the event of a damage consult your dealer.
Installation and Connection Instructions Dimensions of the appliance Front and Side Views Rear View 40
Installation and Connection Instructions Installation of the appliance 3 Washing machines with arched covers are not suited for installation beneath countertops. Transporting the appliance • Do not lay the washing machine on the front or on the left side (seen from the front); otherwise the electrical components could become wet! • Never transport the appliance without transportation protection.
Installation and Connection Instructions Remove transportation protection Attention! Be absolutely certain that all shipping braces have been removed before installing the appliance. Store all shipping braces in a safe place in case they are required for future transport (moving). Special spanner H and cover caps E (2 off) and G (1 off) are supplied with the appliance. 0 1. Remove flexible tubing holder A. 2. Remove the two screws B with special spanner H. 3. Remove the four screws C. 4.
Installation and Connection Instructions Prepare the installation place • The installation surface must be clean and dry, free of floor wax and other smearing substances, so that the appliance does not slip off. Do not use any lubricant as sliding aid. • Installation on a high-veil carpet or floor tiles with soft sponge backs is not recommended because the standing safety of the appliance is then no longer ensured.
Installation and Connection Instructions Levelling on uneven floors Automatically adjusting foot: The back right foot of your washing machine is designed like a telescopic strut with a spring. It ensures that your appliance remains stable even at high spin speeds. If, nevertheless, the washing machine is unstable during spinning, please proceed as follows: 0 1. Set the three adjustable feet to an initial height of 10 mm.
Installation and Connection Instructions Power supply Details on the mains voltage, type of current and the necessary fuse protection are to be found on the rating plate. The rating plate is above and behind the door. For permanent electrical connection within the electrical circuit, provisions must be made which allow for electrical disconnection of the appliance from the mains with a contact opening of at least 3 mm at all poles.
Installation and Connection Instructions Water connection 3 The washing machine is provided with safety devices which prevent reverse pollution of drinking water and conform to the State regulations issued by water supply authorities (e.g. in Germany: DVGW Directives). Further protective measures in the installation are hence unnecessary.
Installation and Connection Instructions Water feed A flexible pressure tubing of 1.35m length is supplied. If a longer feed tubing is needed, a complete VDE-approved tubing set with mounted screw connections, supplied by our customer service, should be used exclusively. – For washing machines without Aqua-Control, tubing sets are available in lengths of 2.2m, 3.5m and 5m. – For washing machines with Aqua-Control, tubing sets are available in lengths of 2.0m, 2.9m and 3.9m.
Installation and Connection Instructions Water drain-off The drain-off tubing can be connected either to a siphon or be hanged in a washing or sink basin or in a bathtub. For extension (max. 3 m floor length and up to 80 cm high) only original tubing may be used. The customer service supplies drain-off tubing of 2.7 and 4m lengths. 0 0 Water drain-off inside a siphon The spout at the end of the tubing fits all common siphon types. Make the connection spout/siphon secure with a tubing clip.
Installation and Connection Instructions Technical data Height x Width x Depth Depth with open door Height adjustment Weight when empty Load (depending on the program) Area of use Wash cycle drum speed Spin cycle drum speed Water pressure 85x60x60cm 95cm approx. +10/-5mm approx. 85kg max. 5kg Household max. 53min-1 r.p.m. see rating plate 1-10bar (=10–100N/cm2 = 0.1 – 1.
Guarantee/Service Departments GUARANTEE/SERVICE DEPARTMENTS Weitere Kundendienststellen im Ausland In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden. Further after-sales service agencies overseas In these countries our AEG agents’ own guarantee conditions are applicable. Please obtain further details direct.
Guarantee/Service Departments Australia ANDI-Co Pty. Ltd 9 Kingston Town Close Oakleigh VIC 3166 Tel.: (03) 9569 1235 Fax: (03) 9569 1450 Korea (South) Core Incorp. 3/F Chewoo Bldg. 200 Nonhyun-Dong Kangnam-Ku Seoul Telefon 82 2 549 89 61 Namibia AEG NAMIBIA (PTY) LIMITED-Jeppe Street Northern Industrial Area Windhoek Tel.: (061) 21-6082/4 Fax: (061) 217838 Bahrain/Arabian Gulf A.A. Zayani & Sons P.O. Box 9 32 Bahrain Tel.: 261060 Croatia Electrolux D.O.O. Suplova 7 10000 Zagreb Tel.
Guarantee/Service Departments Israel Evis Ltd. P.O. Box 70 39 Tel-Aviv – 67013 Tel.: 3257311 Malaysia Arzbergh Engineering No. 49A/B, Jalan Petaling Utama 7 4600 Petaling Jaya Tel.: 3 795 1084 Fax: 3 795 1082 Singapore Japan Arzbergh Engineering Electrolux Japan Ltd. Yasuda Warehouse 4F 3-3-12 19 Tanglin Road 06-07 Singapore 247909 Heiwajima Ota-Ku Tel.: 65 7356572 Tokyo Fax: 7351124 Tel.: 81 3 3544 3363 Fax: 81 3 3763 6143 52 Saudi Arabia Alia Trading Corporation P.O.
Index INDEX A Q Additional Rinse . . . . . . . . . . . . . . . . . . . . . 36 Automatically adjusting foot . . . . . . . .10, 44 Quick Wash . . . . . . . . . . . . . . . 12, 19, 25, 26 C Rating Plate . . . . . . . . . . . . . . . . . 10, 45, 55 Rinse + . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Rinse Hold . . . . . . . . . . . . . . . . . . . 11, 19, 24 Calcium . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Conditioner . . . . . . . . . . .
Service SERVICE If a malfunction should occur at the appliance, refer first to the section "What to do when ..." in these user instructions. If you do not find any applicable instructions there, contact your customer service centre. (Addresses and telephone number can be found in the "Service Departments" section.) Be well prepared before you phone. This facilitates the diagnosis and the decision as to whether a customer service visit is necessary.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.
