User manual

Description of the appliance

Program option buttons

The program option buttons are used to adjust the

washing program to the degree of soiling of the

washing.

Depending on the program different functions can

be combined.

PRE WASH

Cold prewash before the main wash which follows

automatically (not selectable for the WOOLLENS

setting).

SOAKING

Soak before the main wash which follows automatically (1 hour at

40 °C, extendable to max. 19 hours, not selectable for WOOLLENS

setting).

QUICK WASH

Shortened main wash for slightly soiled washing.

STAIN

To treat heavily soiled washing or stained washing with stain remover

(extended main wash with time optimised stain action phase, not

selectable for WOOLLENS setting).

Spin speed/RINSE HOLD button

With this button you can change the maximum speed

for the final spin. With RINSE HOLD the washing stays

in the last rinse water and is not spun.

The speed for the intermediate spin depends on the

program selected and cannot be changed.

DOOR/LIGHT button

You can open the washing machine door with

this button. You can see whether the door can be

opened in the current program cycle by the

colour of the display:

– Green light = door can be opened (not when the child safety device is

activated, please refer to "Child safety device"),

– Light off = door can not be opened

– Red light = door is open

The washing machine drum is illuminated when the door is open. The

light goes off automatically after approx. 3 minutes.