User manual

38
Child safety device
In order to protect a program setting from being accidentally changed
(e.g. turning the program selector, pressing extra keys, etc.), you can set
the child safety device. This prevents children from damaging your
washing.
3
The child safety device can also be set and cancelled whilst a program is
running.
Set the child safety device:
0 Set the desired program.
0 Press the START/PAUSE button.
0 Keep the PRE WASH and SOAKING button pressed down simultaneously
for 5 seconds. The program progress display flashes for five seconds; the
child safety device is set.
If an attempt is made during the washing cycle to change the setting
selected by pressing a button, the program progress display flashes for
five seconds.
If an attempt is made to change the setting selected by turning the
program selector, the program progress display flashes until the
program selector is reset to its original setting. The washing cycle is not
affected in either case.
3
As long as the child safety device is set you cannot make any other
settings. The door cannot be opened with the DOOR/LIGHT button. Also
after the washing cycle has finished you first have to cancel the child
safety device before you can open the door.
Cancelling the child safety device:
0 Keep the PRE WASH and SOAKING buttons pressed simultaneously for
five seconds. The program progress display flashes for five seconds,
after this it lights up continuously for five seconds; the child safety
device is cancelled.
If the program selector is altered during a washing cycle, with the child
safety device activated, the program progress display flashes:
0 If this happens turn the program selector back to its original position.
The program progress display stops flashing and is constantly
illuminated.
0 Cancel the child safety device.