User manual

Operating instructions
23
Wash Complete/Removing the Washing
The washing program is finished when the M (ON/OFF) button indica-
tor lamp extinguishes.
After a Rinse Hold:
After a rinse hold the water must be pumped out first, or the washing
spun:
0 Either keep pressing the final spin speed/o (RINSE HOLD) button
until the indicator lamp for the required spin speed illuminates,
or
turn the program selector clockwise to position 6 (SPIN),
(washing is spun according to the program just completed),
or
turn the program selector clockwise to position 8 (PUMP OUT)
(water is pumped out).
Once the Program is Finished:
0 1. Open the outer door and the main door.
2. Remove the washing.
Important! The washing machine still needs to be switched off.
3. Press the M (ON/OFF) button.
4. Close the water tap.
5. Pull out the detergent drawer a little, so that it can dry out. Leave the
door slightly ajar so that air can circulate in the washing machine.
Important! If the washing machine is not to be used for a long period:
close the tap and isolate the washing machine from the mains.