User manual

Operating instructions
30
Malfunction Possible Cause Remedy
Washing machine does
not work.
Mains plug is not plugged in. Insert mains plug.
House fuse in defective.
Replace fuse or switch on
trip.
The machine does not
take in water.
Door is not closed properly.
Close door, lock must engage
audibly
Tap is closed.
Press the M (ON/OFF) but-
ton;
Open tap;
Reselect program;
Press the M (ON/OFF) button
again.
Sieve in the threaded fitting
on the water inlet hose is
blocked.
Unscrew the hose from the
tap, remove the sieve and
clean under running water
Washing machine
vibrates during opera-
tion or is unstable.
The height adjustable
threaded feet are not cor-
rectly adjusted.
Adjust threaded feet as per
the installation instructions.
There is only very little wash-
ing in the drum (e.g. only a
towelling dressing gown).
Function is not impaired.
Water cannot be completely
pumped out because the
drain hose is kinked
or
the circulation pump is
blocked.
Check the drain hose and if
necessary remove any kink or
clean the circulation pump
and remove any foreign bod-
ies from the pump housing.
Excessive foaming dur-
ing the main wash.
Probably too much detergent
was used
Dose detergent exactly in
accordance with the manu-
facturer’s instructions.