User manual

Operating instructions
36
lation pump cover. Some water may run out.
4. Unscrew the circulation pump cover
in an anticlockwise direction and
remove.
5. Remove foreign body from the
pump housing.
6. Check whether it is possible to turn the
pump impeller. (Jerky pump movement is
normal.) If it is not possible to turn the
impeller, contact customer service.
7. Replace cover (insert stud on the cover into
the guide slot) and tighten in a clockwise
direction.
8. Press the rotating toggle firmly into the emer-
gency drain hose.
9. Push in the rotating toggle together with the
emergency drain hose and tighten by turning
a quarter of a turn to the left.
10. Replace the outer cover.
Additional Rinse/Water Cooling
The washing machine is set up for extremely low water consumption.
• For people who suffer from an allergy to detergents, it can be useful
to rinse with more water (additional rinse).
• It may be necessary to cool the water before it is pumped out in order
to prevent damage to plastic waste pipes (water cooling).
You can activate these functions using the More Water Switch.