User manual

12
User's instructions
- SOAKING
This pushbutton allows to perform a soaking on cotton and synthetics
programmes from "
" to 40°C. This function ends by a rinse hold. Release
this button to continue the programme.
Place the programme selector on the " + " position and press the soaking
pusbutton " ".
- EXTRA RINSE
By pressing this button, the appliance performs 4 rinses instead of 3. It can
be only used on cotton programmes.
Progress within the programme
The programmer turns gradually and shows you how far the programme
advances.
Thermostat
Use the thermostat to choose the temperature of the
washing water. You can choose any temperature
between cold (" ") and 95°C.
The temperatures given in the programme table (page
24) are provided as a guide. You can vary them using
the thermostat knob which equipped your washing
machine. Respect always scrupulously the tempera-
ture indicated on the label on each item to be
washed.
Spinning speed selector
It enables to choose the spinning speed until 1000
rpm on cotton programmes, 850 rpm on synthetics
and wool programmes and 650 rpm on delicates
programmes.
The position " " corresponds to a spinning suppression (only a draining).
Choose the spinning speed on the basis of the type of laundry and the degree
of humidity wished at the end of the cycle.
The position "
" can be used on all wash programmes. When you choose this
position, the appliance will not drain the water of the last rinse so that not
creased the laundry if this one is not immediately unloaded of the drum. The
laundry can then be spun or drained (see page 23).