User manual

18
Products
Choice of detergent
Manufacturers always mark maximum detergent quantities to be used on
their detergent packages, depending on the amount of washing.
Comply with doses and instructions specified on packages.
Proportioning
The quantity of detergent to be used
depends on the amount of washing
to be washed, the hardness of the
water and how dirty your washing is.
Reduce doses slightly if the water is
soft. Increase doses slightly if the
water is hard, or if the washing is very
dirty or stained.
You can determine the degree of
hardness of your water by asking the
water distribution utility in your region or any other competent authority.
Note: Only use low foam detergents sold in the shops specially for use in
washing machines. Use neutral products for washing woolens.
If you use liquid detergents, put the proportioning ball directly in the drum
and choose a programme without pre-wash. If you dry your washing in a
drier, do not forget to take out the proportioning ball. You can also add
liquid detergent for your washing into the drum directly, provided that you
do not do a pre-wash and you start your washing machine immediately.
Liquid detergents are suitable for low temperatures (namely 30°C and 40°C).
It is recommended that a powder detergent should be used for higher
temperatures from 60°C to 90°C.
User's instructions
egnarssendraH
l/lommnissendrahretaW
)retilrepselomillim(
tfoS-I 3,1otpu
muideM-II 5,2-3,1
draH-III 8,3-5,2
drahyreV-VI 8,3nahterom