User manual

26
10. When the program is over
Your washing machine is equipped with an automatic safety device preventing
the opening of the lid while the washing machine is operating. It is normal
to hear a noise of a mechanical locking due to the drum positionning (high
position) : the light DPS lights on. However, you can open the lid only when
the light END OF CYCLE will light.
Programs finish with:
a spin (for all washing programs) if you have not selected the RINSE
HOLD button.
a rinse hold (for all washing programs) if you have selected the RINSE
HOLD button. The on/off light blinks. You can then finish these
programs either with a spin by pressing on the on/off button.or by
a draining by putting the timer on the DRAIN position, then press on
the on/off button.
At the end of these sequences of the program, the light END OF CYCLE
lights on.
At the end of the cycle, put the timer on the STOP position "
" ; the appliance
is switched off.
Remove the laundry. Full the mains plug out and close the water supply tap.
Make sure that the drum is empty; any fabric that remained inside could be
damaged in the next wash (shrinkage) or it could lose its color onto other
items of washing.
Note:
We recommend that you leave the cover and the drum open after use in order
to air the tub.
User's instructions