User manual

32
User's instructions
Symptoms
Solutions
The machine fills up and then drains straight
away.
The machine will not start
The machine will not spin or will not drain
The machine will not fill (failure code E01)
The machine vibrates and is very noisy
Check that:
- the drain pipe is not attached too low.
Check that:
- fuses are in good condition,
- the washing machine is properly connected,
- your washing machine cover is properly closed
(failure code E02),
- you have actually selected the program that
you want,
- the program start has actually been pushed in
(On/Off button pressed in),
- there is no power supply failure,
- the water tap is fully open,
- the water inlet filter is not blocked.
Check that:
- the drain pipe is not blocked or folded,
- the drain pump filter is not blocked (failure
code E03),
- the washing load is properly distributed in
the drum,
- the Drain program has not been selected and
the rinse hold button has not been pressed.
Check that:
- the water inlet tap is open and the pressure
is high enough,
- the washing machine cover is properly
closed (failure code E02)
- there is no power supply failure.
Check that:
- all transport packing has been removed,
- the washing machine is level and properly
supported,
- the washing machine is not too close to the
wall or furniture,
- the washing is well distributed in the drum,
- the load is sufficient.