LAVAMAT 50430 Washing Machine User information
Dear Customer, Please read this instruction book carefully before using the appliance. Please ensure you fully understand the safety instructions on the first pages of this instruction book. Retain the instruction book for future reference, and pass it on to any future owners. 1 The warning triangle and / or key words (Warning!, Caution!, Important!) give information that is important for your safety or the function of the appliance is highlighted. It is imperative that this information is observed. 0 1.
Contents Operating Instructions .................................... 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Environmental tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . .
Programme Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Conditioning/Starching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inlet Hose Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions Operating Instructions 1 Safety The safety features of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law. However, we also consider it our obligation as a manufacturer to inform you about the following safety information. Prior to initial start-up • Observe the "Installation and Connection Instructions" in this instruction book.
Operating Instructions Child Safety • Packaging materials (e.g. films, styrofoam) can be dangerous for children. There is a risk of suffocation! Keep all packaging well away from children. • This appliance is designed to be operated by adults. Do not allow children to tamper with the controls or play with the appliance. • Pets and children have been known to climb into washing machines. Please check the drum before use. • When disposing of the appliance, cut off the mains cable, and destroy the plug.
Operating Instructions 2 Disposal Packaging Dispose of the packaging material correctly. All packaging materials used are environmentally friendly and can be disposed of without any danger to the environment. • Plastic parts can be recycled and are identified as follows: for polyethylene, e.g. the outer covering and the bags in >PE< the interior. >PS< for polystyrene, e.g. padding (always CFC-free) >POM< for polyoxymethylene, e.g.
Operating Instructions Description of the Appliance Front view Detergent dispenser drawer Control panel Rating plate (behind door) Main door Flap in front of drain pump Screw feet (height-adjustable) Detergent Dispenser Drawer Stain removers Main wash detergent in powder form and water softening agent if required Pre-wash detergent/ Soaking agent Liquid conditioner (fabric softener, starch) 9
Operating Instructions Control panel Programme selector Spin speed button ON/OFF button with power indicator light STAIN button RINSE HOLD button QUICK WASH button Temperature selector SOAKING button Programme Selector The programme selector determines the type of wash cycle (eg. water level, drum movement, number of rinses, spin speed) according to the type of articles to be washed.
Operating Instructions RINSE Separate rinse followed by spin or rinse hold, eg. for rinsing handwashed cottons/linen. 3 Rinse hold means: The washing remains in the last rinsing water and is not spun. CONDITION Separate conditioning, separate starching or separate finishing for damp cottons/linen (1 rinse, liquid conditioner is flushed in from the compartment æ followed by spin or rinse hold). SPIN Spin after rinse hold or separate spin for handwashed cottons/linen.
Operating Instructions GENTLE RINSE Separate gentle rinse followed by short spin or rinse hold, eg. for rinsing hand-washed woollens or delicates. CONDITION Separate gentle conditioning for damp woollens or delicates (1 gentle rinse, liquid conditioner is washed in from the compartment æ followed by short spin or rinse hold). PUMP OUT Water pumped out without spin, eg. after rinse hold. Temperature Selector The following settings are possible: COLD, 30, 40, 50, 60, E, 80, 95 °C.
Operating Instructions STAIN For dealing with heavily soiled or stained washing (in-wash stain treatment is added at the optimum time during the course of the programme). STAIN can be used in conjunction with the programme selector settings: – PRE WASH (COTTONS/LINEN); – PRE WASH (EASY-CARES); – MAIN WASH; – EASY-CARES. QUICK WASH Shorter washing cycle for lightly soiled washing. QUICK WASH can be used in conjunction with the programme selector settings: – MAIN WASH; – EASY-CARES.
Operating Instructions Consumption Data and Wash Times The values given in the following table for selected programmes were calculated under standardized conditions. They provide a useful guide for operation in the home. Temperature Selector Load in kg Water in Litres Energy in kWh Time in Minutes COTTONS/LINEN MAIN WASH 95 5 57 1.90 140 COTTONS/LINEN MAIN WASH 601 5 54 0.95 128 COTTONS/LINEN MAIN WASH 40 5 54 0.60 115 EASY-CARES 40 2.5 45 0.40 65 DELICATES 30 2.5 40 0.
Operating Instructions Preparing a Wash Load Sorting and preparing a wash load • Sort washing according to the care symbol and type (see "Washing types and care symbols"). • Empty all pockets. • Remove metal objects (paper clips, safety pins etc.). • In order to prevent bunching up of washing and damage to washing, close zippers, button up duvet covers and pillow cases, and tie up loose straps such as from aprons. • Turn articles with double layered textiles inside out (sleeping bags, anoraks etc.).
Operating Instructions Washing Types and Care Symbols The care symbols help you choose the correct washing programme. Washing should be sorted according to type and care symbol. The temperatures indicated in the care symbols are all maximum temperatures. Cottons ç Fabrics made from cotton and linen with this care symbol will withstand maximum wash actions and high temperatures. The COTTONS/ LINEN programme is appropriate for this type of washing.
Operating Instructions Detergent and Conditioners Which detergent and conditioner? Use only detergents and conditioners which are suitable for use in automatic washing machines. Always follow the manufacturer's instructions.
Operating Instructions Running a Wash Cycle Brief instructions A wash cycle consists of the following steps: 0 1. Open the door and load the washing. 2. Close the door. 3. Add detergent/conditioner. 4. Set the wash programme: – Set the programme using the programme selector; – Set the temperature using the temperature selector; – Set any programme options if required. 5. If necessary, change the spin speed or select RINSE HOLD. You can alter this setting and the temperature at any time during the wash. 6.
Operating Instructions Loading the washing See "Programme Tables" for maximum loads. For information about the correct preparation of the washing see "Sort and prepare washing". 0 1. Sort and prepare the washing according to type. 2. Open the door: Pull the handle on the door. 3. Load the washing. Important! Do not trap washing when closing the door. The fabrics and the machine could be damaged. 4. Close the door firmly.
Operating Instructions Add detergent conditioner For instructions concerning detergents and conditioners see section “Detergents and conditioners”. 0 1. Pull the detergent dispenser drawer out as far as it will go. 2. Add detergent/conditioner 3 Compartment for in-wash stain treatment (only for additional programme STAIN) Compartment for main wash detergent (powder only) and water softener if required (If you are using water softener, add it to the main wash detergent.
Operating Instructions Setting the Washing Programme See “Programme Tables” for a suitable programme, correct temperature and possible programme options to suit the type of washing. Important! Only turn the programme selector in a clockwise direction. 0 1. Set the programme selector to the desired wash programme. 3 2. Set the temperature selector to the desired temperature. 3.
Operating Instructions Changing the Spin Speed/Selecting Rinse Hold 0 If required, change the spin speed for the final spin speed or select RINSE HOLD: – Press the spin speed button or – press the RINSE HOLD button. If RINSE HOLD is selected, the washing will remain in the final rinse water. It will not be spun.
Operating Instructions Wash Programme Progress Programme progress display The programme selector is also a programme progress display. It turns clockwise as the programme progresses until it ends, showing the stage of the programme that is currently being carried out. The speed at which the programme selector turns varies. Changing/Interrupting the Washing Programme Changing settings Whilst the wash programme is in progress you can – change the spin speed; – select RINSE HOLD.
Operating Instructions Washing cycle is complete/Removing Washing A wash programme normally ends with the final spin. 0 0 If SOAKING has been selected: Release the SOAKING button (main wash for COTTONS/LINEN or EASYCARES will run). If RINSE HOLD has been selected: The water must first be pumped out or the washing must still be spun.
Operating Instructions Programme Tables Not all possible settings are listed below, only those which are useful and meaningful in everyday use. Washing Type of Washing Care Symbols Cottons ç Energy-saving programme: Cottons ç Linen è ë Max.
Operating Instructions Separate Rinse Max. Load (dry weight) Programme Selector 5kg RINSE Easy-cares 2.5kg RINSE Delicates 2.5kg Woollens 2kg Type of Washing Cottons/Linen GENTLE RINSE Separate Conditioning/Starching Max. Load (dry weight) Programme Selector 5kg CONDITION Easy-cares 2.5kg CONDITION Delicates 2.5kg Woollens 2kg Type of Washing Cottons/Linen CONDITION Separate Spin Type of Washing Cottons/Linen 26 Max.
Operating Instructions Maintenance and Cleaning Control panel 0 Important! Do not use household furniture polish or abrasive cleaners to clean panel and operating parts. Wipe over the operating panels with a damp cloth. Use warm water. Detergent Dispenser Drawer The detergent dispenser drawer should be cleaned from time to time. 0 1. Pull the detergent dispenser drawer out as far as it will go. 2. Remove the detergent dispenser drawer by pulling sharply. 3.
Operating Instructions 7. Use a brush to clean the entire compartment area of the washing machine, particularly also the nozzles on the top side of the compartment. 8. Set the detergent dispensing drawer into the guide tracks and push it in. Washing Machine Drum 0 The washing machine drum is made from rust-free stainless steel. Any objects left in the laundry which are likely to rust can stain the drum.
Operating Instructions Cleaning the drain pump Paper clips, nails and so on can sometimes get into the washing machine with the washing and remain in the drain pump casing. Fluff and strands of fabric can gather on these items and block the drain pump. Therefore the drain pump should be cleaned at least once a year. Warning! Switch off the washing machine and pull out the mains plug before cleaning the drain pump. 0 1. First carry out emergency emptying (see section "Carrying out emergency emptying“). 2.
Operating Instructions What to do if ... Trouble Shooting Try to rectify minor faults on the washing machine with the aid of the instructions given here. If you call out an engineer to resolve a fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Problem The washing machine does not work. Door cannot be closed. The machine does not take in water. Possible Cause Remedy The mains plug is not plugged in.
Operating Instructions Problem The washing machine vibrates during operation or is unstable. Possible Cause Remedy The transport packaging has not been removed. Remove transport packaging according to the installation and connection instructions. The machine is not level. Adjust the feet according to the installation and connection instructions. There is very little washing in This does not impair the the drum (e.g. only one function. dressing gown).
Operating Instructions Problem Fabric softener was not washed into machine; drawer æ for conditioner is filled with water. Possible Cause Remedy The conditioner insert has Clean the detergent disnot been correctly positioned penser drawer and attach the inside the conditioner comconditioner insert securely. partment or is blocked. Pay attention to the maximum load quantity (see Programme tables). In the case of easy-care fabrics, select the EASY IRON programme.
Operating Instructions If the washing results are not satisfactory If the washing turns greyish and limescale deposits are present in the drum • Insufficient detergent has been added. • Incorrect detergent was used. • Stains were not pre-treated. • Programme or temperature was not set correctly. • If using modular detergents, the individual components were not used in the correct ratio.
Operating Instructions Carrying out an emergency emptying • If the washing machine no longer pumps out the water, emergency emptying must be carried out. • If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out. Furthermore: unscrew the inlet hose from the water tap and drain off the water. Empty the drainage hose. Warning! Switch off the washing machine and pull out the mains plug prior to performing emergency emptying.
Operating Instructions When the water is completely drained: 6. Push the plug securely into the emergency emptying hose and turn it clockwise to secure it. 7. Replace the emergency emptying hose in its holder. 8. Put on the flap and close. Child Safety Feature If the child safety feature is set, the door cannot be closed and no washing programme can be started. 0 1 0 Setting the child safety feature Use a coin to turn the rotary knob on the inside of the door clockwise as far as it will go.
Installation and connection instructions Installation and connection instructions Installation Safety Precautions • When moving do not tilt the washing machine onto its front or onto its right hand side (viewed from the front). This is to prevent the possibility of the electronic components becoming wet. • Before installation inspect the machine for transport damage. Do not connect the appliance if it is damaged - contact your retailer.
Installation and connection instructions Installation of the appliance Transporting the appliance • Do not place the washing machine on its front or on its right hand side (viewed from the front). This is to prevent the possibility of the electronic components becoming wet. • Never transport the unit without the transport packaging and bolts/ bars. Do not remove the transport packaging until the appliance is at the installation location. Transporting the unit without the transport packaging can damage it.
Installation and connection instructions 3 38 The special spanner A and the caps B (2 each) and C (1 each) are supplied with it. 3. Remove the screw D, including the compression spring with the special spanner A. 4. Cover the hole with the cap C. Important! When fitting the plastic caps, press until they snap into the rear panel securely. 5. Remove the two screws E with the special spanner A. 6. Remove the 4 screws F. 7. Remove the transit bar G. 8. Screw the 4 screws F back in for safe keeping. 9.
Installation and connection instructions Installation-Site preparation • The installation surface must be clean, dry and level. Do not install on a deep pile carpet. • Minor unevenness of the floor surface should never be levelled out by laying pieces of wood, card or similar materials, but should always be compensated for by adjusting the screw feet. • If the appliance is installed next to a heat source (e.g.
Installation and connection instructions Levelling the Appliance Floor unevenness can be compensated for and the height can be corrected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm. To adjust the feet use the special spanner supplied. 0 1. Slide the special key firmly onto the hexagon head of the threaded foot as far as it will go. 2. Adjust the screw feet so that the appliance is horizontal and stable. 3.
Installation and connection instructions Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. 1 WARNING - THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is located at the top of the rim of the open door.
Installation and connection instructions Permanent Connection In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point.
Installation and connection instructions Water connection 3 The washing machine is provided with safety devices preventing backcontamination of the water supply and complies with local water authority requirements. This appliance is designed to be permanently plumbed into your home’s water supply. Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.
Installation and connection instructions Inlet Hose Connection A pressure hose of 1.35m in length is supplied. If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections is permissible, available from AEG Service Force Centres. – Hose sets in lengths of 2.2m, 3.5m, and 5m are available for washing machines without Aqua-Control. – Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with Aqua-Control.
Installation and connection instructions Water Drainage The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe. Important! It is essential to lay the drainage hose without kinks.
Installation and connection instructions If you intend the drain hose from the washing machine to empty into a sink, make sure that the sink is empty and the plug hose is not blocked. Use the plastic “U-Piece“ supplied. Important! The end of the drainage hose must not be submerged in the pumped-out water. Otherwise, the water could be sucked back into the appliance.
Installation and connection instructions Technical data Height Adjustment Load (depending on the programme) Area of use Drum speed, spinning Water pressure approx. +10 / -5mm max. 5kg Domestic see rating plate 1-10bar (=10-100 N/cm2= 0.1-1.
Warranty conditions Warranty conditions Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plat
Warranty conditions Weitere Kundendienststellen im Ausland In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden. Further after-sales service agencies overseas In these countries our AEG agents’ own guarantee conditions are applicable. Please obtain further details direct. Autres agences étrangères assurant le service après-vente Dans ces pays, les conditions de garantie des concessionnaires de la région sont valables.
Warranty conditions 50 Bahrain/Arabian Gulf A.A. Zayani & Sons P.O. Box 9 32 Bahrain Tel.: 261060 Croatia Electrolux D.O.O. Suplova 7 10000 Zagreb Tel.: 1 61 19512 Fax: 1 61 19513 New Zealand Euro-Life New Zealand Ltd. Privat Bag 58 Symonds Street Auckland Tel.: (09) 525 2222 Bulgaria Electrolux Bulgaria E.O.O.D. 91 Levski Blvd. 1000 Sofia Tel.: 2 806676 Fax. 2 980 5276 Kuwait/Arabian Gulf Ali Al-Ghanim Est. P.O. Box 10 83 Tel.: 5322463 Fax: 5242114 Nouvelle Caledonie Socometra N.C. B.P.
Warranty conditions Israel Electricity & Electronic Services-Evis LTD. 19 Hataasia st. Raanana, Industrial area 43654 Tel: 972-9-7448118 Fax: 972-9-7603618 e-mail:evis@evis.co.il Malaysia Arzbergh Engineering No. 49A/B, Jalan Petaling Utama 7 4600 Petaling Jaya Tel.: 3 795 1084 Fax: 3 795 1082 Saudi Arabia Alia Trading Corporation P.O. Box 4101 King Abdul Aziz Street Riyadh Tel.: 4645977 Al Nahas Est. Musaidia Market I P.O. Box 1 15 29 Jeddah Tel.: 6606852 Japan Electrolux Japan Ltd.
Index Index C R Care agent . . . . . . . . . . . . . . . . . . . . 9, 17, 20 Care symbols . . . . . . . . . . . . . . . . . . . . . . . . 16 Child safety feature . . . . . . . . . . . . . . .30, 35 Circulation pump . . . . . . . . . . . . . . . . . . . . 29 Conditioner . . . . . . . . . . . . 9, 11, 12, 20, 26 Cottons . . . . . . . . . . . . . . . . . . .10, 16, 25, 26 Curtains . . . . . . . . . . . . . . . . . . . . . . . . .15, 25 Customer Service . . . . . . . . . . . . . . . . .28, 55 Rating plate .
Service & Spare Parts Service & Spare Parts If after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centre. In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for in-guarantee service calls.
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.
