LAVAMAT 54550 ELECTRONIC Washing Machine User Information
Dear customer, Please read this user information carefully. In particular, pay attention to the section ”Safety” on the first pages. Keep this user information in a safe place for later reference. Pass it on to any subsequent owners of the unit. 1 Points which are necessary for your safety or which are important for the unit's functional capability are highlighted by a warning triangle and/or signal words (Warning!, Caution!, Attention!). Always remember. 0 1.
Contents Instructions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Environment Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Unit Description . . . . . . . . . . . .
Programme Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Rinsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 27 28 28 Cleaning and Care . . . . . . . . . . . . . . . . . .
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Water Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permissible Water Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water Inflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instructions for use Instructions for use 1 Safety The safety of AEG electrical appliances conforms to the recognised technical regulations and the legislation covering the safety of appliances. However, as manufacturers, we still regard it as our responsibility to inform you of the following safety information. Before Putting into Operation for the First Time • Refer to the ”Installation and Connection Instructions” later in this user information.
Instructions for use Child Safety • Packaging components (e.g. films, polystyrene) can be hazardous to children. Risk of suffocation! Keep packaging away from children. • Children often cannot recognise the hazards associated with handling electrical appliances. Therefore, ensure the necessary supervision during operation and do not allow children to play with the washing machine – there is a risk that children can get trapped inside.
Instructions for use • Small animals can chew the power cables and water hoses. Risk of electric shock and danger of water damage! Keep small animals away from the washing machine. 2 Disposal Dispose the packing material! Dispose of your washing machine's packaging correctly. All the packaging materials used are harmless to the environment and can be recycled. • Plastic parts are marked with standard international abbreviations: >PE< for polyethylene, e.g. sheet wrapping material >PS< for polystyrene, e.
Instructions for use 2 Environment Tips • The pre-wash cycle is not required for averagely dirty washing. This saves washing powder/liquid, water and time (and does not harm the environment). • The washing machine is especially economical when you fully utilise the stated filling quantities. • For small amounts of washing, use only half to two thirds the recommended amount of washing powder/liquid. • Suitable pretreatment enables stains and small amounts of dirt to be removed.
Instructions for use Unit Description Front View Drawer for washing powder and care agent Control panel Rating plate (behind filling door) Filling door Screw feet (height-adjustable) Flap in front of drain pump Drawer for Detergent and Conditioners Main wash detergent (powder) and water softener if required Pre-wash detergent or water softener Liquid conditioners (softeners, finishers, starch) 10
Instructions for use Control Panel Spin speed/RINSE HOLD button Additional Programme buttons Control knob Programme progress display START/PAUSE button DOOR indicator Programme Knob The programme knob is used to set the wash cycle (for example, water level, drum movement, number of rinses, spin speed) most suitable for the type of washing, as well as the temperature of the water. OFF (UIT/ARRET) • Switches the washing machine off - at all other positions the machine is on.
Instructions for use DELICATES (FIJNE WAS, DELICAT) Main wash programme for Delicates at 30 °C or 40 °C. WOOL/SILK (WOL/ZIJDE, LAINE/SOIE) P (Handwash) Main wash cycle (cold or 30 °C) for machine-washable or hand-washable woollen items and silk, which bear the symbol ï (Handwash). GENTLE RINSE (SPOELEN, RINC. DELICAT) Separate gentle rinse, for example to rinse hand-washed items (3 rinses, liquid additive washed in from compartment æ, spin).
Instructions for use Programme Option Buttons The programme option buttons are used to adapt the programme to suit the degree of soiling of the wash. The programme options are not needed for normally soiled washing. The different functions can be combined together, depending on the programme.
Instructions for use Consumption values and programme times The values for selected programmes given in the following table were established under normal conditions.
Instructions for use Prepare the Washing Cycle Sort and Prepare the Washing • Sort the washing according to care codes and type (see ”Washing Types and Care Codes”). • Empty pockets. • Remove metal parts (paper clips, safety pins etc.). • To prevent washing damage and washing snags: Close zip fasteners, button closed bed covers and pillow cases, and tie together ribbons, e.g. on aprons. • Use clothing made of double-layer fabric (sleeping bag, anorak etc.).
Instructions for use Types of washing and care symbols Care symbols help you to choose the correct wash programme. Washing should be sorted by type and according to care symbols. The temperatures indicated on the care symbols are the maximum wash temperatures. Cottons ç Cotton and linen items with this care symbol are not sensitive to machine washing or high temperatures. The COTTONS/LINEN (WITTE/BONTE WAS, BLANC/COULEURS) programme is suitable for this type of washing.
Instructions for use Detergent and Conditioners Which detergent and conditioner? Use only detergents and conditioners which are suitable for use in automatic washing machines. Always follow the manufacturer's instructions.
Instructions for use Water Softener For medium to high water hardness (hardness category II or higher) you should use water softener. Pay attention to the manufacturer's instructions. Always then meter detergent for hardness category I (= soft). The responsible water works can provide information on the local water hardness. 2 Since the water softener is added before the main washing detergent, (water pre-softening), eighty percent of the softener quantity stated on the package is sufficient.
Instructions for use Performing a Wash Cycle Brief guide A wash cycle consists of the following steps: 1. Open the door and load the washing. 2. Close the door. 3. Add detergent/additives. 4. Set the appropriate wash programme: – Set the programme and temperature using the programme knob – Set additional programme functions as required. 5. Change the Spin Speed/press RINSE HOLD (SPOELSTOP, ARRET CUVE PLEINE) as necessary. 6.
Instructions for use Opening and Closing the Door 0 0 To open: pull the door by the handle. To close: push the door in firmly.
Instructions for use Adding detergent/conditioners For instructions concerning detergent and conditioners, see Section "Detergents and conditioners“. 0 1. Open the detergent dispenser drawer: press the flap on the drawer so as to be able to grasp the handle (1), and pull out the drawer (2). 3 2. Add the detergent/conditioners.
Instructions for use Setting the washing programme For the appropriate programme, temperature and possible programme options suitable for any type of washing, see "Programme Tables". 0 1. Select the desired wash programme and temperature with the programme selector. 3 2. If required, select the appropriate programme option(s): The indicator of the selected programme option illuminates. – To change the selection, press another button. – To cancel a selection, press the button again.
Instructions for use Changing Spin Speed/Selecting RINSE HOLD (SPOELSTOP, ARRET CUVE PLEINE) 0 To change the Spin Speed for the final rinse or select RINSE HOLD (SPOELSTOP/ARRET CUVE PLEINE): Keep pressing the Spin Speed/RINSE HOLD (SPOELSTOP/ARRET CUVE PLEINE) button until the light for the desired speed (or RINSE HOLD/SPOELSTOP/ ARRET CUVE PLEINE) comes on. If RINSE HOLD (SPOELSTOP/ARRET CUVE PLEINE) is selected, the washing is left to soak in the last rinse water, without spinning.
Instructions for use Setting the delay timer 0 0 3 The DELAY TIMER (STARTTIJDKEUZE/DEPART DIFFERE) button allows you to delay the start of a wash programme. Press the button DELAY TIMER (STARTTIJDKEUZE/DEPART DIFFERE) once if you would like the wash programme to start in six hours. The 6h display will illuminate. Press the button DELAY TIMER (STARTTIJDKEUZE/DEPART DIFFERE) twice if you would like the wash programme to start in three hours. The 3h display will illuminate.
Instructions for use Changing the washing programme Changing or cancelling the programme 0 1. Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE). 2. Turn the programme selector to OFF (UIT/ARRET). The washing programme is cancelled. 3. Set another washing programme, if required. Otherwise, turn the programme selector to DRAIN (POMPEN/VIDANGE) or SPIN (CENTRIFUG./ESSORAGE) and press the START/PAUSE (START/ PAUZE/MARCHE/PAUSE) button. (The water is drained or the washing is spun.
Instructions for use End of Wash Cycle/Removing the Washing When a wash cycle is completed, the END (EINDE/FIN) light on the Programme Progress Display comes on. If RINSE HOLD (SPOELSTOP/ARRET CUVE PLEINE) was selected, the indicator lights DOOR (DEUR/PORTE) and END (EINDE/FIN) come on. 1.
Instructions for use Programme Tables Washing The tables do not show all the possible settings, only those most likely to be selected for everyday purposes. Type of washing, Care symbol Cottons ç Cottons/Coloureds3) èç Coloureds èë Max.
Instructions for use Max. Load1) (Dry weight)2) Type of washing, Care symbol Wool/Silk (Handwash) 9ìï 2kg Programme selector Temperature [in °C] Possible programme options P WOOL/SILK DELAY TIMER (WOL/ZIJDE, LAINE/SOIE) (STARTTIJDKEUZE/ COLD (KOUD/FROID), 30 DEPART DIFFERE) 1) The load amount inquiry operates in accordance with the EN 60456 standard load. 2) A 10 litre bucket holds around 2.5 kg of dry clothes (cotton).
Instructions for use Cleaning and Care Control Panel 0 Attention! For cleaning panels and control parts, do not use furniture polish or any aggressive cleaning agents. Wipe off control panels with a damp cloth. Use warm water to do this. Washing Detergent Drawer The washing detergent drawer should be cleaned from time to time. 0 1. Pull out the washing detergent drawer as far as it will go. 2. Remove the washing detergent drawer with a firm pull. 3.
Instructions for use 7. Use a brush to clean the entire rinsing-in part of the washing machine, especially the nozzles on the top side of the rinsing-in chamber. 8. Insert the washing detergent drawer into the guide rails and push it in. Washing Drum 0 The washing drum is made of high-quality stainless steel. Rust deposits on the drum can occur due to foreign bodies in the washing which can cause rust.
Instructions for use What to do if ... Remedying Faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even during the warranty period. Problem Possible Cause Remedy The power plug is not connected. Connect the plug to a power outlet. A domestic fuse has tripped.
Instructions for use Problem The END (EINDE/FIN) light flashes 8 times and at the same time an acoustic signal sounds 8 times. The washing machine vibrates when operating or is noisy. Possible Cause Remedy The programme selector has not clicked into place correctly. First turn the programme selector to OFF (UIT/ARRET), then set the desired programme to the exact position. The transit bolt/bars were not removed.
Instructions for use Problem Possible Cause The threaded inlet hose fitting is not watertight. Remedy Screw the inlet hose in firmly. The outlet hose is not water- Check the outlet hose and tight. replace it, if necessary. The drain pump cover is not closed properly. Water runs out from under the washing machine. Close the cover properly. Stop the programme and Washing has been trapped in free the washing from the the door. Start a new prodoor. gramme.
Instructions for use Problem Washing is not spun thoroughly and water remains visible in the drum. The END (EINDE/FIN) light flashes twice and at the same time an acoustic signal sounds twice. Possible Cause Remedy There is a kink in the outlet hose. Straighten the hose. The maximum pump height (outlet height 1m from the washing machine’s installation surface) has been exceeded. Contact Customer Service, who will be able to provide an adaptor kit for pump lifts greater than 1m as a special accessory.
Instructions for use Problem Possible Cause Remedy The water tap is not turned on fully. Turn the water tap on fully. The filter in the threaded inlet hose fitting is blocked at the water tap or at the washing machine. Close the water tap. Unscrew the inlet hose from the water tap and from the machine. Clean the filters. The rinse water is cloudy. The probable cause is a detergent high in silicate content. This has no adverse effects on rinse results; if possible, use liquid detergent.
Instructions for use If the washing result is not satisfactory If the washing is grey and limescale forms in the drum • Not enough washing detergent added. • The right washing detergent was not used. • Special types of stain were not pretreated. • Program or temperature incorrectly set. • If binary wahing detergents were used, the individual components were not added in the correct ratio.
Instructions for use Carry Out an Emergency Emptying Operation • When the washing machine no longer pumps off the washing solution, an emergency emptying operation must be carried out. • When the washing machine is in a room where there is a frost risk, an emergency emptying operation must be carried out when there is a frost risk. Also: Unscrew the intake hose from the water tap and lay it on the floor. Empty the drainage hose.
Instructions for use When all the washing solution has drained off: 6. Firmly push the plug into the emergency emptying hose and turn it tight clockwise. 7. Put the emergency emptying hose back into the holder. 8. Insert the flap into the base panel and close. Drain pump The drain pump is maintainance-free. The cover of the drain pump is required to be opened only in the event of a malfunction when no more water is being pumped out, e.g. if the pump wheel is blocked.
Instructions for use 5. Check that you are able to turn the pump wheel at the very rear of the pump housing. (If the wheel rotates with a jerky motion, this is normal.) If you cannot turn the pump wheel, please contact customer service. 6. Replace the pump cover. Laterally insert the webs on the cover into the guide slots and securely screw on the cover in a clockwise motion. 7. Close the emergency emptying hose and place it in the holder. 8. Close the flap.
Instructions for use Additional rinse cycles (SPOELEN+, RINSE+/RINCAGE+) The washing machine is set for very economical water consumption. However, people who suffer from allergies to detergents, it can be helpful to rinse with extra water. 3 If RINSE+ (SPOELEN+/RINCAGE+) is selected, two extra rinses are added to the programmes COTTONS/LINEN (WITTE/BONTE WAS, BLANC/COULEURS), EASY-CARES/EASY IRON (KREUKHERSTELLEND/STRIJKVRIJ, TEXTILES MELANGES/FACILE A REPASSER) and DELICATES (FIJNE WAS/ DELICAT).
Instructions for use Child Safety Feature When the child safety feature is used, the filling door can no longer be closed and no more washing programs can be started. 0 1 0 Setting the Child Safety Feature: Use a coin to turn the rotary knob (on the inside of the filling door) clockwise as far as it will go. Warning! The rotary knob must not be pressed in following adjustment, otherwise the child safety feature is not active. The rotary knob must project as shown in the diagram.
Setting up and connection instructions Setting up and connection instructions Safety Instructions for Installation • Do not tilt the washing machine onto its front or onto its right side (looking from the front). Electrical components could get wet! • Check the washing machine for transport damage. Never connect a damaged unit. Consult your supplier in the event of damage.
Setting up and connection instructions Setting Up the Unit 3 Washing machines with curved panels are not suitable for substructures. Transporting the Unit • Do not place the washing machine on its front side or on its right side (looking from the front). Otherwise the electrical components can get wet. • Never transport the unit without using the transport safeguard. Do not remove the transport safeguard until you reach the installation site.
Setting up and connection instructions 3 44 The special button A and the plug caps B (2 ea.) and C (1 ea.) are supplied with the unit. 3. Remove the screw D, including the compression spring with the special button A. 4. Close off the hole with the plug cap C. Attention! Push in the plug cap so firmly that it engages in the rear panel (this protects the inside of the unit against splash water). 5. Unscrew the two screws E using the special button A. 6.
Setting up and connection instructions Prepare the Installation Location • The installation surface must be clean, dry and free of floor wax residue and other lubricating coatings so that the unit does not slide away. Do not use any lubricants as sliding aids. • It is not recommended to set up the washing machine on deep-pile carpets or on floor coverings with soft foam underlays, as this would mean that the stability of the unit would not be guaranteed.
Setting up and connection instructions Compensate for Floor Unevenness Floor unevenness can be compensated for and the height can be corrected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm. To adjust the feet use the special spanner supplied for removing the transport braces. 0 1. Slide the special key firmly onto the hexagon head of the threaded foot as far as it will go. 2. Adjust the screw feet so that the unit is horizontal and stable.
Setting up and connection instructions Electrical Connection Refer to the rating plate for details of the mains voltage, current type and the necessary fuses. The rating plate is located at the top behind the filling door.
Setting up and connection instructions Water Inflow A pressure hose 1.35m in length is supplied. If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible. – Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua-Control. – Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with Aqua-Control.
Setting up and connection instructions Water Drainage The drainage hose can either be connected to a siphon or hung in a wash basin or bath tub. Only original hoses may be used for extension purposes (max. 3m on the floor and then up to 80cm high). The Customer Service stocks hoses in lengths of 2.7 and 4m. Attention! It is absolutely essential to install the drainage hose free of pinches. 0 Water Drainage into a Siphon The grommet on the end of the hose fits all commonly used siphon types.
Setting up and connection instructions Delivery Heads over 1m To pump off the washing / rinsing agent, every washing machine has a pump which transports liquids via the drainage hose up to a height of 1m, calculated from the machine's floor. For delivery heads over 1m, consult the Customer Service. Technical Data Height adjustment Filling quantity (program-dependent) Use Drum speed, spin Water pressure Dimensions (Measurements in mm) 50 Approx. +10/-5mm max.
Guarantee conditions Guarantee conditions Belgium DECLARATION OF GUARANTEE TERMS. Our appliances are produced with the greatest of care. However, a defect may still occur. Our consumer services department will repair this upon request, either during or after the guarantee period. The service life of the appliance will not, however, be reduced as a result. This declaration of guarantee terms is based on European Union Directive 99/44/EC and the provisions of the Civil Code.
Guarantee conditions 12. If, during the guarantee period, repairing the same defect repeatedly is not conclusive, or if the repair costs are considered disproportionate, in agreement with the consumer, the defective appliance may be replaced with another appliance of the same value. In this event, we reserve the right to ask for a financial contribution calculated according to the length of time it has been used. 13.
Customer services Customer services Belgium Tel.: Electrolux Home Products Belgium ELECTROLUX SERVICE Bergensesteenweg 719 1502 Lembeek Province de Liège: S.D.E. Rue Gaucet 26 4020 Liege Fax.: Consumer services 02/363.04.44 02/363.04.00 02/363.04.60 04/343.11.60 04/343.47.
Index Index A Programme progress display . . . . . . . . . . . .24 Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Q C Quick wash . . . . . . . . . . . . . . . . . . .13, 22, 27 Cancelling the programme . . . . . . . . . . . . Changing the programme . . . . . . . . . . . . . Child safety feature . . . . . . . . . . . . . . . . . . Coloureds . . . . . . . . . . . . . . . . . . . . . . . .16, Conditioner . . . . . . . . . . . . . . . . 9, 10, 17, Cottons . . . . . . . . . . . . . . .
Service Service In the section ”What to do if ...” there is a list of some faults which you can remedy yourself. Look there first if a fault occurs. If you find no information there, please consult your Customer Service Centre. Always prepare in advance for the discussion. By doing so you will simplify the diagnosis and the decision on whether customer service is necessary. Note the PNC-number and the S-number. Both can be found on the rating plate on the inside of the door on your washing machine. PNC ...
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.
