ÖKO-LAVAMAT 70530 update The Environmentally-Friendly Washing Machine User Information
Dear customer, Please read this user information carefully. In particular, pay attention to the section ”Safety” on the first pages. Keep this user information in a safe place for later reference. Pass it on to any subsequent owners of the unit. 1 Points which are necessary for your safety or which are important for the unit's functional capability are highlighted by a warning triangle and/or signal words (Warning!, Caution!, Attention!). Always remember. 0 1.
Contents CONTENTS Instructions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Environment Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Unit Description . . . . . . .
Contents Program Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Conditioning/Starching/Impregnating . . . . . . . . . . . . . . . . . . . . Separate Rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Water Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permissible Water Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water Inflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instructions for use INSTRUCTIONS FOR USE 1 Safety The safety of AEG electrical appliances conforms to the recognised technical regulations and the legislation covering the safety of appliances. However, as manufacturers, we still regard it as our responsibility to inform you of the following safety information. Before Putting into Operation for the First Time • Refer to the ”Installation and Connection Instructions” later in this user information.
Instructions for use Child Safety • Packaging components (e.g. films, polystyrene) can be hazardous to children. Risk of suffocation! Keep packaging away from children. • Children often cannot recognise the hazards associated with handling electrical appliances. Therefore, ensure the necessary supervision during operation and do not allow children to play with the washing machine – there is a risk that children can get trapped inside.
Instructions for use 2 Disposal Dispose the packing material! Dispose of your washing machine's packaging correctly. All packaging materials are environmentally compatible and can be disposed of without risk or incinerated at a refuse combustion plant. The plastics can also be reused: • The outer sleeve and the bags are made of polyethylene (code >PE<). • The cushioned parts are made of foamed, CFC-free polystyrene (code >PS<).
Instructions for use Unit Description Front View Drawer for washing powder and care agent Control panel Rating plate (behind filling door) Filling door Flap in front of solution pump Screw feet (height-adjustable) Drawer for Washing Powder and Care Agent In-wash stain treatment Main detergent (powder) and water-softener if required Pre-wash detergent/ soaking agent or water-softener Liquid care agent (conditioner, finisher, starch) 9
Instructions for use Control Panel Spin button / RINSE HOLD Additional program buttons Program sequence display DOOR display Multidisplay Program selector Button START/PAUSE OVER DOSING display Program Selector The program selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses, spin speed) according to the type of garments being washed, and also the washing solution. OFF (UIT, ARRET) Switches off the washing machine. All other positions are "switched on".
Instructions for use EASY-CARES (KREUKHERSTELLEND, DEFROISSABLE) Main washing cycle for easy-care textiles (mixed fabrics) at 40 °C to 60 °C. EASY IRON position (STRIJKVRIJ, SANS REPASSAGE): Main washing cycle at 40 °C for easy-care textiles which, with the aid of this program, only have to be either gently ironed or not ironed at all. DELICATES (FIJNE WAS, LINGE DELICAT) Main washing cycle for delicates at 30 °C or 40 °C.
Instructions for use Additional Program Buttons The additional program buttons are for adapting the washing program to the dirtiness of the washing. Additional programs are not required for washing which is not excessively dirty. Various functions can be combined with each other, depending on the program. VOORWAS PRELAV. INWEKEN TREMPAGE KORT COURT PRE WASH (VOORWAS, PRELAV.
Instructions for use Consumption Values and Time Requirements The values for selected programs in the following tables were determined under normal conditions. However, there is a helpful orientation aid for domestic operation.
Instructions for use What Does ”Update” Mean? The washing programs of your washing machine are controlled by software. New types of textiles or new washing powders/liquids could, in the future, require new washing programs. The software can be adapted to these in most cases. When new washing programs are available, you can also use them in your washing machine by having the software updated. For further information on the ”Update”, consult the Customer Service.
Instructions for use Prepare the Washing Cycle Sort and Prepare the Washing • Sort the washing according to care codes and type (see ”Washing Types and Care Codes”). • Empty pockets. • Remove metal parts (paper clips, safety pins etc.). • To prevent washing damage and washing snags: Close zip fasteners, button closed bed covers and pillow cases, and tie together ribbons, e.g. on aprons. • Use clothing made of double-layer fabric (sleeping bag, anorak etc.).
Instructions for use Washing Types and Care Codes The care codes help you choose the correct washing program. The washing should be sorted according to type and care code. The temperatures stated in the care codes are all maximum values. Cottons ç Textiles made of cotton and linen with this care code are insensitive to mechanical stress and high temperatures. The program COTTONS/LINEN (WITTE/BONTE WAS, BLANC/COULEURS) is suitable for this type of washing.
Instructions for use Washing Detergents and Care Agents Which washing detergent and care agent? Use only washing detergents and care agents which are suitable for use in washing machines. Always follow the manufacturer's instructions.
Instructions for use Run a Washing Cycle Brief Instructions A washing cycle is run in the following steps: 0 1. Set the correct washing program: – Set the program and temperature with the program selector – Set any additional program(s) 2. If necessary, change the spin speed/select RINSE HOLD (GEEN CENTR., SANS ESSOR.). 3. Open the filling door and fill with washing. 4. Close the filling door. 5. Add washing detergent/care agent. 6. Start the washing program.
Instructions for use Set the Washing Program For a suitable program, the right temperature and possible additional programs for the relevant washing type, refer to the ”Program Tables”. 0 1. Set the program selector to the required washing program with the required temperature. The probable duration of the set program in minutes is shown in the multi-display. 3 2. Select any additional programs: The indicator for the selected additional program lights up.
Instructions for use Change Spin Speed / Select Rinse Hold 0 If necessary, change the spin speed for the final spin / select RINSE HOLD (GEEN CENTR., SANS ESSOR.): Press the button Spin speed/RINSE HOLD (GEEN CENTR., SANS ESSOR.) as often as necessary until the display for the required spin speed (or of RINSE HOLD/GEEN CENTR., SANS ESSOR.) lights up. If RINSE HOLD (GEEN CENTR., SANS ESSOR.) is selected, the washing remains in the last rinsing water and is not spun.
Instructions for use Opening and Closing the Filling Door 0 0 Open: Pull on the handle of the filling door. Close: Press the filling door firmly closed.
Instructions for use Add Washing Detergent/Care Agent Refer to the information on washing detergents and care agents, see section ”Washing Detergents and Care Agents”. 0 1. Open the washing detergent drawer: grip inside the flap on the drawer at the bottom (1) and pull out the drawer as far as it will go (2). 3 2.
Instructions for use Start the Washing Program 0 1. Check that the water valve is open. 2. Start the washing program: Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE). The washing program is started. 3 The filling door is not correctly closed if, when the button START/PAUSE (START/PAUSE, MARCHE/PAUSE) is pressed, – the indicator DOOR (DEUR, PORTE) flashes red – the fault code E40 in the multidisplay flashes – and the indicator MAIN WASH (HOOFDWAS, LAVAGE) flashes.
Instructions for use Changing a Washing Program Changing or aborting a program 0 1. Press button START/PAUSE (START/PAUZE, MARCHE/PAUSE). 2. Turn programme knob to OFF (UIT, ARRET). The washing program is aborted. 3. If required, set a new washing program. Otherwise turn the programme knob to PUMP OUT (POMPEN, VIDANGE) and then press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE).
Instructions for use Washing Cycle Ended/Remove Washing After a washing program has ended, END (EINDE, FIN) lights up on the program sequence display. If you selected RINSE HOLD (GEEN CENTR., SANS ESSOR.), the indicator next to the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) flashes. 0 1.
Instructions for use Program Tables Washing Not all possible settings are listed below - only the ones most commonly used in everyday operation and the most appropriate ones. Type of Washing, Care Codes Cottons ç Energy-Saving Program: Cottons ç Linen è ë 26 Max. Filling Quantity (dry weight)1) 5kg 5kg 5kg Program Selector Temperature Possible Additional Programs COTTONS/LINEN (WITTE/BONTE WAS, BLANC/COULEURS) 95 PRE WASH (VOORWAS, PRELAV.
Instructions for use Type of Washing, Care Codes Max. Filling Quantity (dry weight)1) 2.5kg Easy-Cares ê í 1kg Delicates ì Woollens/ Handwash 9 ì ï 2.5kg (or 15-20m2 curtains) 2kg Program Selector Temperature EASY-CARES (KREUKHERSTELLEND, DEFROISSABLE) 40 to 60 EASY IRON2) (STRIJKVRIJ, SANS REPASSAGE) 40 Possible Additional Programs PRE WASH (VOORWAS, PRELAV.) SOAKING (INWEKEN, TREMPAGE) QUICK WASH (KORT, COURT) STAIN (VLEKKEN, TACHES) PRE WASH (VOORWAS, PRELAV.
Instructions for use Separate Conditioning/Starching/Impregnating Type of Washing Cottons/Linen Max. Filling Quantity (dry weight) Program Selector 5kg STARCHING (STIJVEN, AMIDON.) Max. Filling Quantity (dry weight) Program Selector Separate Rinse Type of Washing Cottons/Linen 5kg Easy-Cares 2.5kg Delicates 2.5kg Woollens/Handwash GENTLE RINSE (FIJN SPOELEN, RINC. DELICAT) 2kg Separate Spin Type of Washing Cottons/Linen Program Selector 5kg SPIN (CENTRIFUG., ESSORAGE) Easy-Cares 2.
Instructions for use Cleaning and Care Control Panel 0 Attention! For cleaning panels and control parts, do not use furniture polish or any aggressive cleaning agents. Wipe off control panels with a damp cloth. Use warm water to do this. Washing Detergent Drawer The washing detergent drawer should be cleaned from time to time. 0 1. Pull out the washing detergent drawer as far as it will go. 2. Remove the washing detergent drawer with a firm pull. 3.
Instructions for use 7. Use a brush to clean the entire rinsing-in part of the washing machine, especially the nozzles on the top side of the rinsing-in chamber. 8. Insert the washing detergent drawer into the guide rails and push it in. Washing Drum 0 The washing drum is made of high-quality stainless steel. Rust deposits on the drum can occur due to foreign bodies in the washing which can cause rust.
Instructions for use What to do if ... Remedying Faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even during the warranty period. • If the fault code E10, E20 or E40 is shown in the multidisplay, you may be able to remedy the fault yourself (see Faults Table below).
Instructions for use Problem No water runs in. Fault code E10 appears. The indicator RINSE+ (SPOELEN+, RINCAGE+) flashes. Possible Cause Water valve is closed. Remedy Open the water valve. Close the water valve. Unscrew the hose from the Filter in screw connection of water valve, remove the filter the intake hose is blocked. and clean it under running water. The height-adjustable screw feet are not correctly set. Adjust in accordance with the installation and connection instructions.
Instructions for use Problem Fault code appears. EF0 Conditioner not added, compartment w for care agent full of water. Washing heavily creased. Washing not well spun. Residual water still visible in the drum. Fault code E20 appears. The indicator RINSE (SPOELEN, RINCAGE) flashes. Possible Cause Remedy The anti-flood system Aqua Control has responded. Close the water tap. Turn the programme knob to OFF (UIT, ARRET). Call your after-sales service.
Instructions for use Problem Possible Cause Remedy Water valve not fully opened. Open the water valve fully. Washing detergent residues form in the washing detergent drawer. The rinsing water is murky. Filter in the screw connection of the intake hose on the water valve or on the unit is blocked. The cause is probably a No negative influence on the detergent with a high silicate rinsing result, use liquid content. detergent if necessary.
Instructions for use If the washing result is not satisfactory If the washing is grey and limescale forms in the drum • Not enough washing detergent added. • The right washing detergent was not used. • Special types of stain were not pretreated. • Program or temperature incorrectly set. • If binary wahing detergents were used, the individual components were not added in the correct ratio.
Instructions for use Carry Out an Emergency Emptying Operation • When the washing machine no longer pumps off the washing solution, an emergency emptying operation must be carried out. • When the washing machine is in a room where there is a frost risk, an emergency emptying operation must be carried out when there is a frost risk. Also: Unscrew the intake hose from the water tap and lay it on the floor. Empty the drainage hose.
Instructions for use When all the washing solution has drained off: 6. Firmly push the plug into the emergency emptying hose and turn it tight clockwise. 7. Put the emergency emptying hose back into the holder. 8. Insert the flap into the base panel and close. Clean the Solution Pump Warning! Before cleaning the solution pump, switch off the washing machine and pull out the mains plug! 0 1. First carry out an emergency emptying (see the above section ”Carry Out Emergency Emptying”). 2.
Instructions for use Emergency Unlocking of the Filling Door When the filling door can no longer be opened, it can be opened with the aid of the emergency unlocking facility. 0 1. If you can see water in the viewing window of the filling door, first carry out an emergency eptying operation (see section ”Emergency Emptying”). 2. Open the flap downwards in the right part of the base panel. 3. Turn the rotary knob clockwise slightly with the aid of a coin. And hold it in this position. 4.
Instructions for use Additional Rinse (RINSE+/SPOELEN+/RINCAGE+) The washing machine is set for extremely economical water consumption. However, for persons who suffer from allergies, it can be helpful to rinse with more water. 3 If RINSE+ (SPOELEN+, RINCAGE+) is set, an additional rinse is performed in the case of the programs COTTONS/LINEN (WITTE/BONTE WAS, BLANC/COULEURS), EASY-CARES (KREUKHERSTELLEND, DEFROISSABLE)/EASY IRON (STRIJKVRIJ, SANS REPASSAGE) and DELICATES (FIJNE WAS, LINGE DELICAT).
Instructions for use Child Safety Feature When the child safety feature is used, the filling door can no longer be closed and no more washing programs can be started. 0 1 0 40 Setting the Child Safety Feature: Use a coin to turn the rotary knob (on the inside of the filling door) clockwise as far as it will go. Warning! The rotary knob must not be pressed in following adjustment, otherwise the child safety feature is not active. The rotary knob must project as shown in the diagram.
Setting up and connection instructions SETTING UP AND CONNECTION INSTRUCTIONS Safety Instructions for Installation • Do not tilt the washing machine onto its front or onto its right side (looking from the front). Electrical components could get wet! • Check the washing machine for transport damage. Never connect a damaged unit. Consult your supplier in the event of damage.
Setting up and connection instructions Setting Up the Unit 3 Washing machines with curved panels are not suitable for substructures. Transporting the Unit • Do not place the washing machine on its front side or on its right side (looking from the front). Otherwise the electrical components can get wet. • Never transport the unit without using the transport safeguard. Do not remove the transport safeguard until you reach the installation site.
Setting up and connection instructions 2. Firmly pull both hose holders off the unit. 3 The special button E and the plug caps D (2 ea.) and G (1 ea.) are supplied with the unit. 3. Unscrew the two screws A using the special button E. 4. Unscrew the four screws B using the special button E. 5. Remove the transport rail C. 6. Screw the four screws B back in. 7. Close off the two large holes with the plug caps D.
Setting up and connection instructions Prepare the Installation Location • The installation surface must be clean, dry and free of floor wax residue and other lubricating coatings so that the unit does not slide away. Do not use any lubricants as sliding aids. • It is not recommended to set up the washing machine on deep-pile carpets or on floor coverings with soft foam underlays, as this would mean that the stability of the unit would not be guaranteed.
Setting up and connection instructions Compensate for Floor Unevenness Floor unevenness can be compensated for and the height can be corrected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm. To adjust the feet use the special spanner supplied for removing the transport braces. 0 1. Slide the special key firmly onto the hexagon head of the threaded foot as far as it will go. 2. Adjust the screw feet so that the unit is horizontal and stable.
Setting up and connection instructions Electrical Connection Refer to the rating plate for details of the mains voltage, current type and the necessary fuses. The rating plate is located at the top behind the filling door.
Setting up and connection instructions Water Inflow A pressure hose 1.5m in length is supplied. If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible. – Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua-Control. – Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with Aqua-Control.
Setting up and connection instructions Water Drainage The drainage hose can either be connected to a siphon or hung in a wash basin or bath tub. Only original hoses may be used for extension purposes (max. 3m on the floor and then up to 80cm high). The Customer Service stocks hoses in lengths of 2.7 and 4m. Attention! It is absolutely essential to install the drainage hose free of pinches. 0 Water Drainage into a Siphon The grommet on the end of the hose fits all commonly used siphon types.
Setting up and connection instructions Delivery Heads over 1m To pump off the washing / rinsing agent, every washing machine has a pump which transports liquids via the drainage hose up to a height of 1m, calculated from the machine's floor. For delivery heads over 1m, consult the Customer Service. Technical Data Height adjustment Filling quantity (program-dependent) Use Drum speed, spin Water pressure Approx. +10/-5mm max. 5kg Domestic see rating plate 1-10bar (=10–100N/cm2 = 0.1–1.
Index INDEX A Aqua Control . . . . . . . . . . . . . . . . . . . . . . . . 14 C Care agent . . . . . . . . . . . . . . . . . 9, 17, 18, Child safety feature . . . . . . . . . . . . . . .31, Conditioner . . . . . . . . . . . . . 8, 9, 11, 22, Cottons . . . . . . . . . . . . . . . . . . .10, 16, 26, Curtains . . . . . . . . . . . . . . . . . . . . . . . . .15, Customer service . . . . . . . . . . . . . . 14, 30, 22 40 28 28 27 31 D Delicates . . . . . . . . . . . . . . . . . . . . . 11, 16, 27 Detergent .
Service SERVICE In the section ”What to do if ...” there is a list of some faults which you can remedy yourself. Look there first if a fault occurs. If you find no information there, please consult your Customer Service Centre. Always prepare in advance for the discussion. By doing so you will simplify the diagnosis and the decision on whether customer service is necessary. Note the PNC-number and the S-number. Both can be found on the rating plate on the inside of the door on your washing machine. PNC ...
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.
