ÖKO-LAVAMAT 72640 update The environmentally friendly washing machine User information
Dear Customer, Please read this instruction book carefully before using the appliance. Please ensure you fully understand the safety instructions on the first pages of this instruction book. Retain the instruction book for future reference, and pass it on to any future owners. 1 The warning triangle and / or key words (Warning!, Caution!, Important!) give information that is important for your safety or the function of the appliance is highlighted. It is imperative that this information is observed. 0 1.
Contents Operating Instructions .................................... 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Environmental tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . .
Programme Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate conditioning/starching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inlet Hose Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions Operating Instructions 1 Safety The safety features of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law. However, we also consider it our obligation as a manufacturer to inform you about the following safety information. Prior to initial start-up • Observe the "Installation and Connection Instructions" in this instruction book.
Operating Instructions Child Safety • Packaging materials (e.g. films, styrofoam) can be dangerous for children. There is a risk of suffocation! Keep all packaging well away from children. • This appliance is designed to be operated by adults. Do not allow children to tamper with the controls or play with the appliance. • Pets and children have been known to climb into washing machines. Please check the drum before use. • When disposing of the appliance, cut off the mains cable, and destroy the plug.
Operating Instructions 2 Disposal Packaging Dispose of the packaging material correctly. All packaging materials used are environmentally friendly and can be disposed of without any danger to the environment. • Plastic parts can be recycled and are identified as follows: for polyethylene, e.g. the outer covering and the bags in >PE< the interior. >PS< for polystyrene, e.g. padding (always CFC-free) >POM< for polyoxymethylene, e.g.
Operating Instructions Description of the Appliance Front view Detergent dispenser drawer Control panel Rating plate (behind door) Main door Flap in front of drain pump Screw feet (height-adjustable) Detergent dispenser drawer Stain removers Main wash detergent in powder form and water softening agent if required Pre-wash detergent/ soaking agent or water softening agent if used Liquid conditioners (fabric softener, starch) 9
Operating Instructions Control panel Spin speed / RINSE HOLD button Programme option buttons Programme progress display DOOR Indicator Programme selector Multi-display DELAY TIMER button OVER DOSING indicator START/ PAUSE button Programme selector The programme selector is used to select the washing cycle (for example water level, drum movement, number of rinses, spin speed) and the temperature according to the type of washing.
Operating Instructions EASY IRON position: Main wash cycle at 40 °C for easy-care fabrics which, after washing with this programme, only require a gentle iron, if any ironing at all. DELICATES Main wash cycle for delicates at 30 °C or 40 °C. WOOL P (hand wash) Main wash cycle (cold to 40 °C) for machine-washable woollens and for woollen fabrics and silk carrying the symbol ï (hand wash). GENTLE RINSE Separate gentle rinsing e.g.
Operating Instructions SOAKING Approx. 50 minutes at 30°C. Can be extended to a maximum of 10 hours and approx. 20 minutes with the DELAY TIMER button. The main wash programme then follows automatically. QUICK WASH Shortened main wash cycle for lightly soiled washing. STAIN For heavily soiled or stained washing. In-wash stain treatment products are washed in at the optimum point in the programme cycle.
Operating Instructions Consumption data The values given in the following table for selected programmes were calculated under standard conditions. They provide a useful guide for operation in the home. Programme selector/ temperature Load in kg Water in litres Energy in kWh COTTONS/LINEN 95 5 45 1.70 COTTONS/LINEN 601) 5 42 0.94 COTTONS/LINEN 40 5 49 0.60 EASY-CARES 40 2.5 54 0.50 DELICATES 30 2.5 50 0.30 2 48 0.
Operating Instructions Before the first wash 0 Run a washing cycle without washing (COTTONS 95, with half the amount of detergent). This removes any residues from the drum which may have been left during manufacturing. Preparing a Wash Load Sorting and preparing a wash load • Sort washing according to the care symbol and type (see "Washing types and care symbols"). • Empty all pockets. • Remove metal objects (paper clips, safety pins etc.).
Operating Instructions Washing Types and Care Symbols The care symbols help you chose the correct washing programme. Washing should be sorted according to type and care symbol. The temperatures indicated in the care symbols are the maximum temperatures. Cottons ç Fabrics made from cotton and linen with this care symbol will withstand maximum wash actions and high temperatures. The COTTONS / LINEN programme is appropriate for this type of washing.
Operating Instructions Detergent and Conditioners Which detergent and conditioners? Only use detergents and conditioners that are suitable for use in washing machines. Always follow the manufacturer's instructions.
Operating Instructions Running a washing cycle Brief instructions A washing cycle consists of the following steps: 0 1. Set the correct washing programme: – Select the programme and temperature with the programme selector. – Select any programme options if required. 2. If necessary, change the spin speed/select RINSE HOLD. 3. Set the DELAY TIMER if required. 4. Open the door and load the washing. 5. Close the door. 6. Add the detergent/conditioner. 7.
Operating Instructions Setting the Washing Programme See "Programme tables" for a suitable programme, correct temperature and possible programme options to suit the type of washing. 0 1. Set the programme selector to the desired washing programme with the desired temperature. The expected duration of the programme selected is displayed in the multi display in minutes. 3 2. If required, select programme option(s): The indicator of the programme selected lights up.
Operating Instructions Changing the spin speed/Selecting the rinse hold function If required, change the spin speed for the final spin/select rinse hold: 0 3 0 3 Changing the spin speed Continue pressing the spin speed/RINSE HOLD button until the indicator for the desired spin speed is illuminated.
Operating Instructions Setting the delay timer / soaking duration Delay timer 0 3 The DELAY TIMER button allows the start of a washing programme to be delayed by 1 hour up to a maximum of 19 hours. To do this, press the DELAY TIMER button repeatedly until the desired start delay is shown in the multi display, for example 12h for a 12 hour delay. If 19h is displayed and you press again, 0h appears, followed by the duration time of the set programme (displayed in minutes e. g.126).
Operating Instructions Opening and closing the door 0 0 Open: Pull the handle on the door. Close: Press the door firmly closed.
Operating Instructions Add detergent / conditioner For instructions concerning detergent and conditioners, see "Detergents and conditioners". 0 1. Open the detergent dispenser drawer. press in the flap on the drawer so as to be able to grasp the handle(1), and pull out the drawer (2). 2.
Operating Instructions Starting the washing programme 0 1. Check that the water tap is open. 2. Start the washing programme: Press the START/PAUSE button The washing programme is started or starts at the end of the time delay set. 3 If the DOOR display flashes red when the START/PAUSE button is pressed, the door is not properly closed. – The display DOOR flashes red – The error code E40 then flashes in the multi display – And the MAIN WASH display flashes.
Operating Instructions Washing Programme Progress Programme progress display Prior to the start, the programme steps chosen are displayed by the Programme progress display. During the washing programme the current programme step is displayed. Multi-display The expected time remaining (in minutes) to the end of the programme is displayed in the multi display.
Operating Instructions Changing the washing programme Changing or cancelling the wash programme 0 1. Press the START/PAUSE button. 2. Turn the programme selector to OFF. The washing programme is cancelled. 3. If required, set a new washing programme. Otherwise, turn the programme selector to DRAIN and press the START/PAUSE button. 3 The washing programme can be interrupted at any time with the START/PAUSE button and can be continued by pressing the button again.
Operating Instructions Washing cycle is complete/Removing the washing. Once the washing programme has come to an end, END illuminates on the programme progress display. If RINSE HOLD was selected, the display beside the START/ PAUSE button flashes. 0 1.
Operating Instructions Programme Tables Washing The tables do not show all the possible settings, only those most likely to be selected for everyday purposes. Type of washing; care symbol Cottons ç Energy-saving programme: Cottons ç Linen è ë Easy-cares ê í Delicates ì Woollens/Hand Wash 9 ì ï Max.
Operating Instructions Separate conditioning/starching Type of washing Cottons/linen Max. Load (dry weight) Programme selector 5kg STARCHING Max. Load (dry weight) Programme selector Separate rinse Type of washing Cottons/linen 5kg Easy-cares 2.5kg Delicates 2.5kg GENTLE RINSE Woollens/Hand Wash 2kg Separate spin Type of washing Cottons/linen Programme selector 5kg SPIN Easy-cares 2.5kg Delicates 2.5kg Woollens/Hand Wash 28 Max.
Operating Instructions Maintenance and Cleaning Control panel 0 Important! Do not use household furniture polish or abrasive cleaners to clean panel and operating parts. Wipe over the operating panels with a damp cloth. Use warm water. Detergent Dispenser Drawer The detergent dispenser drawer should be cleaned from time to time. 0 1. Pull the detergent dispenser drawer out as far as it will go. 2. Remove the detergent dispenser drawer by pulling sharply. 3.
Operating Instructions 7. Use a brush to clean the entire compartment area of the washing machine, particularly also the nozzles on the top side of the compartment. 8. Set the detergent dispensing drawer into the guide tracks and push it in. Washing Machine Drum 0 The washing machine drum is made from rust-free stainless steel. Any objects left in the laundry which are likely to rust can stain the drum.
Operating Instructions What to do if... Trouble Shooting If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.
Operating Instructions Problem Possible Cause Water tap is closed. No water flows. Fault code E10 appears. The display RINSE + flashes The washing machine vibrates during operation or is unstable. Remedy Open the water tap. Close the water tap. Unscrew Filter in screw connection of the hose from the tap, remove the filter and clean unthe inlet hose is blocked. der running water Water tap is blocked with limescale or is faulty. Check the water tap and have it repaired if necessary.
Operating Instructions Problem Possible Cause Remedy The screw connection on the Tighten the inlet hose screw inlet hose is leaking. connection The drainage hose is leaking. Check the drainage hose and replace it if necessary. The washing drain pump cover is not correctly closed. Close cover correctly. Water runs out from under the washing ma- Washing is caught in the door. chine. Stop the programme and remove the washing caught in the door. Restart the programme.
Operating Instructions Problem Possible Cause Remedy Wait until the DOOR display lights up green. The door cannot be opened when the appliance is switched on. If it is still necessary to open the door: The door is locked due to a turn the programme selector high water level or a high temperature. (the DOOR dis- to OFF turn the programme selector to DRAIN. Press the play is off). START/PAUSE button After the water has been pumped out, the door can be opened. Power failure! (All displays have gone off.
Operating Instructions If the washing results are not satisfactory If the washing turns greyish and limescale deposits are present in the drum • Insufficient detergent has been added. • Incorrect detergent was used. • Stains were not pre-treated. • Programme or temperature was not set correctly. • If using modular detergents, the individual components were not used in the correct ratio.
Operating Instructions Carrying out an emergency emptying • If the washing machine no longer pumps out the water, emergency emptying must be carried out. • If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out. Furthermore: unscrew the inlet hose from the water tap and drain off the water. Empty the drainage hose. Warning! Switch off the washing machine and pull out the mains plug prior to performing emergency emptying.
Operating Instructions When the water is completely drained: 6. Push the plug securely into the emergency emptying hose and turn it clockwise to secure it. 7. Replace the emergency emptying hose in its holder. 8. Put on the flap and close. Drain pump The drain pump is maintenance free. The cover of the drain pump must only opened in the event of a malfunction when no more water is being pumped out, e.g. if the pump is blocked.
Operating Instructions 5. Replace the pump cover. Laterally insert the webs on the cover into the guide slots and screw on the cover in a clockwise direction. 6. Close the emergency emptying hose and place it in the holder. 7. Close the flap. Additional Rinse (RINSE+) The washing machine is set for very economical water consumption. However, for people who suffer from allergies to detergents, it can be helpful to rinse with extra water.
Operating Instructions Child Safety Feature If the child safety feature is set, the door cannot be closed and no washing programme can be started. 0 1 0 Setting the child safety feature Use a coin to turn the rotary knob on the inside of the door clockwise as far as it will go. Warning! The rotary knob must not be in a vertical position after adjustment, otherwise the child safety feature is not active. The rotary knob must project as shown in the diagram.
Installation and connection instructions Installation and connection instructions Installation Safety Precautions • When moving do not tilt the washing machine onto its front or onto its right hand side (viewed from the front). This is to prevent the possibility of the electronic components becoming wet. • Before installation inspect the machine for transport damage. Do not connect the appliance if it is damaged - contact your retailer.
Installation and connection instructions Installation of the appliance Transporting the appliance • Do not place the washing machine on its front or on its right hand side (viewed from the front). This is to prevent the possibility of the electronic components becoming wet. • Never transport the unit without the transport packaging and bolts/ bars. Do not remove the transport packaging until the appliance is at the installation location. Transporting the unit without the transport packaging can damage it.
Installation and connection instructions 3 42 The special spanner A and the caps B (2 each) and C (1 each) are supplied with it. 3. Remove the screw D, including the compression spring with the special spanner A. 4. Cover the hole with the cap C. Important! When fitting the plastic caps, press until they snap into the rear panel securely. 5. Remove the two screws E with the special spanner A. 6. Remove the 4 screws F. 7. Remove the transit bar G. 8. Screw the 4 screws F back in for safe keeping. 9.
Installation and connection instructions Installation-Site preparation • The installation surface must be clean, dry and level. Do not install on a deep pile carpet. • Minor unevenness of the floor surface should never be levelled out by laying pieces of wood, card or similar materials, but should always be compensated for by adjusting the screw feet. • If the appliance is installed next to a heat source (e.g.
Installation and connection instructions Levelling the Appliance Floor unevenness can be compensated for and the height can be corrected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm. To adjust the feet use the special spanner supplied. 0 1. Slide the special key firmly onto the hexagon head of the threaded foot as far as it will go. 2. Adjust the screw feet so that the appliance is horizontal and stable. 3.
Installation and connection instructions Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. 1 WARNING - THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is located at the top of the rim of the open door.
Installation and connection instructions Permanent Connection In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point.
Installation and connection instructions Water connection 3 The washing machine is provided with safety devices preventing backcontamination of the water supply and complies with local water authority requirements. This appliance is designed to be permanently plumbed into your home’s water supply. Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.
Installation and connection instructions Inlet Hose Connection A pressure hose of 1.35m in length is supplied. If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections is permissible, available from AEG Service Force Centres. – Hose sets in lengths of 2.2m, 3.5m, and 5m are available for washing machines without Aqua-Control. – Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with Aqua-Control.
Installation and connection instructions Water Drainage The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe. Important! It is essential to lay the drainage hose without kinks.
Installation and connection instructions If you intend the drain hose from the washing machine to empty into a sink, make sure that the sink is empty and the plug hose is not blocked. Use the plastic “U-Piece“ supplied. Important! The end of the drainage hose must not be submerged in the pumped-out water. Otherwise, the water could be sucked back into the appliance.
Installation and connection instructions Technical data Height Adjustment Load (depending on the programme) Area of use Drum speed, spinning Water pressure approx. +10 / -5mm max. 5kg Domestic see rating plate 1-10bar (=10-100 N/cm2= 0.1-1.
Warranty conditions Warranty conditions Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plat
Index Index C Changing the programme . . . . . . . . . . . . . Child safety feature . . . . . . . . . . . . . . .31, Conditioner . . . . . . . . . 9, 11, 16, 17, 22, Cottons . . . . . . . . . . . . . . . . . . .10, 15, 27, Curtains . . . . . . . . . . . . . . . . . . . . . . . . . . . . Customer Service . . . . . . . . . . . . . . . . .30, R 25 39 28 28 14 55 D Delay timer . . . . . . . . . . . . . . .10, 12, 20, Delicates . . . . . . . . . . . . . . . . . .11, 15, 27, Detergent . . . . . . . . . . . . .
Service & Spare Parts Service & Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.
