User manual

Operating Instructions
41
Additional Rinse RINSE+
The washing machine is set for very economical water consumption.
However, for persons who suffer from allergies to detergents, it can be
helpful to rinse with extra water.
3
If this function is set, an additional rinse cycle is carried out for the
COTTONS/LINEN, EASY-CARES, EASY IRON and DELICATES programmes.
When the appliance is supplied from the factory, the additional rinse
function is not set.
Setting the additional rinse function:
0 1. Turn the programme selector to SHORT SPIN.
2. Press the SENSITIVE button for at least 5 seconds. After the button has
been pressed for 5 seconds, RINSE
+ will flash in the programme
progress display for 5 seconds.
3. While RINSE
+ is flashing, release the SENSITIVE button. Once the flash-
ing has stopped, the additional rinse has been set. It will remain set un-
til it is cancelled again. When the additional rinse has been set, the
RINSE
+ indicator in the programme progress display is illuminated be-
fore the programme starts and during the additional rinse.
4. If you wish to check whether the additional rinse is set:
– Turn the programme selector to SHORT SPIN.
– Press the SENSITIVE button briefly.
If RINSE
+ flashes in the programme progress display the additional
rinse has been set.
Cancelling the additional rinse:
0 1. Turn the programme selector to SHORT SPIN.
2. Press the SENSITIVE button for at least 5 seconds.
Immediately the button is pressed RINSE
+ will flash in the programme
progress display. After 5 seconds RINSE
+ will stop flashing and remain
constantly illuminated for a further 5 seconds.
3. While RINSE
+ is constantly illuminated, release the SENSITIVE button.
Once RINSE
+ is no longer illuminated the additional rinse has been
cancelled.
3
An additional rinse cycle increases water consumption and the pro-
gramme duration.