User manual

Operating Instructions

Running a Wash Cycle

Brief Instructions

A wash cycle consists of the following steps:

0 1. Set the correct wash programme:

– select the programme and temperature using the programme selector

– if required, select programme option

2. If required change the spin speed/select o (RINSE HOLD).

3. If required, set the b (DELAY TIMER).

4. Open the door and load the washing.

5. Close the door.

6. Add detergent/conditioner.

7. Start the wash programme by pressing the O/s (START/PAUSE)

button.

When the wash programme has ended:

Important! If the wash cycle has ended with a rinse hold, activate

v (DRAIN), K (SPIN) or L (SHORT SPIN) before opening the door.

8. Open the door and remove the washing.

9. Switch off the washing machine: set the programme selector to

I (OFF).